mgctech CBT-20Q Wireless Charger User Manual
- July 31, 2024
- MGCTECH
Table of Contents
CBT-20Q Wireless Charger
“`html
Specifications:
- Input: DC 9V/3A, 5V/3A
- Output: 15W/5W
- Product Standard: Qi2
- Charging Distance: 10mm
- Charging Efficiency: 80%
- Product Dimension: 6666105mm
- Product Material: ABS+Tempered Glass
- Input interface: Type-C port
Product Usage Guide:
-
Connect the product to a QC or PD power adapter using the
Type-C quick charging cable for fast wireless charging
support. -
Utilize the built-in stepper motor and touch button for
automatic rotation to accommodate different sizes of Qi-enabled
smartphones. -
Pop up the iWatch charging stand and place the Apple Watch for
wireless charging at 2.5W output. -
Pop up the earphone charging stand and place the earphone case
for wireless charging at 2.5W output. -
Use the touch-sensitive design for automatic rotation of your
smartphone with different viewing angles. Do not manually rotate to
prevent damage.
Product Parts Description:
- Touch button for rotation
- Charging area for phone
- Charging area for earphone
- Charging area for watch
- Indicator Light
- Type-C input port
FAQ:
Q: What should I do if the charging pad is not working?
A: Make sure the product is connected to a compatible QC or PD
power adapter and that the device being charged is Qi-enabled.
Also, check for any metal or magnet objects on the charger that may
interfere with charging.
Q: Can I use the wireless charger in high-temperature
environments?
A: It is not recommended to use the charger in severely high
temperatures, high humidity, or corrosive environments as it may
damage the circuitry and cause leakage.
Q: How do I know if the charger is in standby or charging
mode?
A: The green LED light indicates standby mode for 10 seconds,
while the ice blue LED light breathes during charging mode. When a
phone is removed, the light turns off after 20 seconds.
“`
CBT-20Q
User Manual
Wireless Charger
Product Introduction
This is a multifunctional desktop magnetic 3 in 1 auto rotation wireless
charger, which can wirelessly charge mobile phones, headphones, and watches at
the same time by power supply.Bid farewell wired shackles and start wireless
experience.
Product Usage Guide
1.Please connect the product through the Type-C quick charging cable to the QC
or PD above power adapter,to ensure that it supports fast wireless charging.
2.Built-in stepper motor and touch button to support wireless charger
automatic rotation function, to compatible with different size of qi-enabled
smartphonts.
3.Press and popup the iWatch charging stand, place the Apple Watch to start
wireless charging with 2.5W output.
4.Press and popup the earphone charging stand, place the earphone case to
start wireless charging with 2.5W output.
5.Touch-sensitive design that allows for the automatic rotation of your
smartphone with different viewing angle.(Please do not rotate it by hands to
avoid of damage the product. Please reconnect the power
supply and touch button to adjust it to the correct position .)
Product Parts Description
2 1
Specifications
InputDC 9V/3A,5V/3A Output15W/5W Product StandardQi2
4
Indicators and Protection
Charging Distance10mm Charging Efficiency80% Product Dimension6666105mm Product MaterialABS+Tempered Glass Input interfaceType-C port
1.Standby mode: The green LED light keeps on 10 seconds and turns off .
2.Charging mode: Ice blue LED light breathing, once the phone removed,
the light turns off after 20 seconds. 3.FOD function: when put metal or magnet
objects on the charger,
the ice blue LED light will flashs 6 times and stops charging. 4.Perfect
protective function based on over-voltage, over-current,
over-temperature andshort-circuit protection.
Attention
3 5
1 Touch button for rotation 2 Charging area for phone
1.Please do not vigorously extrude or collide. 2.Please do not dismantle or
put it into fire or water when the product
is power on,to avoid short circuit or leakage. 3.Please do not use it in
severely high temperature,high humidity or
corrosive environment,to avoid damage to the circuit leakage. 4.Please do not
put the magnetic strip or chip card (Such as ID card,
bankcard etc.)on the charging pad to avoid to cause magneticcard lose
efficacy. 5.Please do not put the metal (Such as coin etc.) on the chargingpad
when charging,to avoid damage from heating.
3 Charging area for earphone
4 Charging area for watch
5 Indicator Light
6 Type-C input port 6
Fast wireless charging requires QC or PD adapters.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>