Shenzhen Mgctech IC-M3 15W Magnetic Wireless Car Charger User Manual
- June 6, 2024
- Shenzhen Mgctech
Table of Contents
Shenzhen Mgctech IC-M3 15W Magnetic Wireless Car Charger
Specification
Indicator light Status and Protection Function
Standby: Indicator light keeps blue. Charging: Indicator light keeps green. Fully Charged: The status of the wireless charging indicator is different when different mobile phones are fully charged. Some phones indicator lights turns off, and some keeps green. If the phone is not removed for a long time, it keeps the battery at 100% trickle charge. FOD Function: Intelligent recognition of foreign objects, such as coins, keys and other metal or magnetic objects, the blue and green lights flash and the power supply is stopped. Cooling Fan: The fan will start when put a device that supports wireless charging (such as phones, Airpods), and the fan stopped rotating once removed the device. Overall Protection: over-temperature, short-circuit, over- voltage, over-current.
Product Parts Description
Attention
- Please do not vigorously extrude or collide.
- Please do not dismantle or put it into fire or water when the product is powered on, to avoid short circuit or leakage.
- Please do not use it in severely high temperatures, high humidity or corrosive environment to avoid damage to the circuit leakage.
- Please do not put the magnetic strip or chip card (Such as ID card, bankcard etc.) on the charging pad to avoid causing the magnetic card to lose efficacy.
- Please do not put the metal (Such as coin etc.) on the charging pad when charging, to avoid damage from heating.
5V2A adapter is applicable to 5W standard wireless charging mode. 9V1.67A adapter is applicable to iPhone 7.5W fast wireless charging mode. 9V1.67A adapter is applicable to Samsung 10W fast wireless charging mode. 12V/1.5A adapter is applicable to 15W fast wireless charging mode.
Note: This product is applicable to all Qi-standard wireless charging phones, other phones need an external receiver for the wireless charging function.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>