MGCTECH SC-A5 Multifunctional Desktop 4In1 Wireless Charger User Manual
- June 12, 2024
- MGCTECH
Table of Contents
MGCTECH SC-A5 Multifunctional Desktop 4In1 Wireless Charger User Manual
Product Introduction
This is a multifunctional desktop 4 in 1 wireless charger, which can
wirelessly charge mobile phones, headphones, and watches at the same time by
power supply.
Bid farewell wired shackles and start wireless experience. This product also
comes with adjustable seven-color LED light.
Product Usage Guide
- Please connect the product through the Type-C quick charging cable to the 18W or 18W above power adapter,to ensure that it supports fast wireless charging.
- Mobile phone wireless charging area is foldable and built-in 2 coils, it supports wireless charging for qi-enabled smartphones of various size.
- Watch charging area 2W output, place your Apple Watch to start wireless charging.
- Earphone charging area 5W output, place your earphone case to start wireless charging . (Please make sure the earphone face up.)
- Please click the button to adjust different LED light color, long press the button to turn off the light.
Fast wireless charging requires QC/PD 18W or 18W above adapter
Specifications
Input: DC 12V/3A,9V/2A,5V/3A
Output: DC 5V/0.4A,5V/1A,9V/1.22A,12V/1.25A
Product Standard: Qi
Rated power: Watch: 2W; Earphone: 5W;
Phone: 5W, 10W, 15W
Charging Distance: ≤10mm
Charging Efficiency: ≤80%
Product Dimension: 15053123mm
Product Material: ABS+Tempered Glass Wireless Charger
Inputinterface: Type-C port
Indicators and Protection
- Standby mode: the LED indicator keeps green.
- Charging mode: the LED light keeps blue. Once the qi devices removed, the light will change back to green.
- Seven-color light: click the button to make the color of light cycle from red, green, blue, yellow, purple, cyan and white.
- FOD function: When put metal or magnet objects on the charger, the white LED indicator light will flashs 3 times and stops charging.
- Perfect protective function based on over-voltage, over-current, over-temperature andshort-circuit protection.
Attention
- Please do not vigorously extrude or collide.
- Please do not dismantle or put it into fire or water when the product is power on,to avoid short circuit or leakage.
- Please do not use it in severely high temperature,high humidity or corrosive environment, to avoid damage to the circuit leakage.
- Please do not put the magnetic strip or chip card (Such as ID card,bankcard etc.)on the charging pad to avoid to cause magneticcard lose efficacy.
- Please do not put the metal (Such as coin etc.) on the chargingpad when charging,to avoid damage from heating.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
Warning: Please do not disassemble the wireless charging part of the watch, which may damage the product.