KOHLER K-1124-GH Heated Bubble Massage Air Bath Owner’s Manual
- July 12, 2024
- Kohler
Table of Contents
KOHLER K-1124-GH Heated Bubble Massage Air Bath
Product Information
Specifications
- Model: K-1124-GH
- Size: 72 x 36 inches
- Weight: 120 lbs (54.4 kg)
- Water Depth: 15 inches (381 mm)
- Water Capacity: 72 gallons (272.5 L)
- Electrical Requirements:
- Blower: 120 V, 10 A, 60 Hz
- Heater: 120 V, 5 A, 60 Hz
Product Usage Instructions
Installation
This product is designed for drop-in installation only. Ensure you have two
dedicated circuits protected with a Class A Ground-Fault Circuit-Interrupter
(GFCI). Follow the installation instructions carefully for proper setup.
Required Products/Accessories
For installation, you will need either the K-7271 Brass Slotted Overflow
Bath Drain or the K-7272 PVC Slotted Overflow Bath Drain.
Recommended Products/Accessories
- K-1446 Remote Installation Kit
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31797 Slotted overflow bath drain kit
- K-31795 Slotted overflow above-the-floor bath drain kit
Electrical Requirements
Ensure you have the correct electrical service with the following
specifications:
- Blower: 120 V, 15 A, 60 Hz
- Heater: 120 V, 15 A, 60 Hz
Maintenance
Regularly clean the product using the recommended products and accessories to
maintain its performance and appearance.
FAQ
-
Q: What colors/finishes are available?
A: The available colors/finishes include White, Biscuit, Dune, Ice Grey, Thunder Grey, and Black. -
Q: What are the electrical requirements for this product?
A: The blower requires 120 V, 10 A, 60 Hz, and the heater requires 120 V, 5 A, 60 Hz.
Features
- 120 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust massage intensity to 18 levels
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Technology
- Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
- User interface: electronic keypad control
Installation
- Reversible drain
- Drop-in
Products/Accessories
Required Products/Accessories
-
K-7271 Brass Slotted Overflow Bath Drain
or -
K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
- K-1446 Remote Installation Kit
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31797 Slotted overflow bath drain kit
- K-31795 Slotted overflow above-the-floor bath drain kit
Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
- ADA
- ICC/ANSI A117.1
- IAPMO Certification
- cUL Listed
- UL Listed
KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER®
Hydrotherapy Components Five-Year Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DIMENSION
Required Electrical Service
Two dedicated circuits required, protected with Class A Ground-Fault Circuit-
Interrupter (GFCI). Outside North America, this device may be known as a
Residual Current Device (RCD).
- Blower: 120 V, 15 A, 60 Hz
- Heater: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location: Reversible
- Basin area, bottom: 51-3/8″ x 21″ (1305 mm x 533 mm)
- Basin area, top: 64-1/2″ x 30-1/2″ (1638 mm x 775 mm)
- Weight: 120 lbs (54.4 kg)
- Minimum floor load: 41 lbs/ft² (200.2 kg/m²)
- Water depth: 15″ (381 mm)
- Water capacity: 72 gal (272.5 L)
- Electrical component rating:
- Blower: 120 V, 10 A, 60 Hz
- Heater: 120 V, 5 A, 60 Hz
- Minimum flat for door: 1-9/16″ (40 mm)
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- This product is designed for drop-in installation only. It is not suited for use in a three-wall alcove with an overhead shower.
- Remote blower installation kit is available for relocating the blower. Provide access for servicing the blower.
- Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly.
- ADA compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada
6-10-2024 20:59 – US
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>