Shenzhen Mgctech CF-10 Fast Wireless Car Charger User Manual
- June 6, 2024
- Shenzhen Mgctech
Table of Contents
Shenzhen Mgctech CF-10 Fast Wireless Car Charger User Manual
Product Features
- Smart touch button and charging LED indicator on both sides, fully automatic induction.one hand operation.
- Built-in wireless charging transmitter, support qi wireless charging for all Qi-enabled smartphones.
- Built-in smart cooling fan, the fan will start working when put the phone on the charger and wireless charging start. The fan stops working when the phone is removed. The wireless charger and mobile phone will be cooled at the same time to improve the wireless charging efficiency, and the wireless charging speed is faster.
- Adjustable feet suitable for different size phones, anti-slip silicone on both arms and feet, Type-C charging port.
- Built-in stepper motor.it works without noise.
- NPO capacitors, lower charging temperature and high charging efficiency.
- Standby mode: the green and blue LED indicator light flashes alternatively, then the green indicator light keeps on.
- Charging mode: the blue LED indicator light keeps on.
- FOD function: when put metal or magnet objects on the charger, the blue and green LED indicator light flash 6 times for reminding.
- Perfect protective function based on over-voltage, over-current, over-temperature and short-circuit protection.
Specifications
Product Parts Description
Product Operating Guide
- Please make sure the product connect to the power before using.
- The green LED indicator light on if connected with power.
- The LED indicator light will flashes and the product stop charging when the current is too large or there is foreign object. Do not wireless charging the phone if similar situation happened.
- Touch the power button to open the 1wo arms and place phone on the charger, then the phone will start wireless charging and the two arms locking automatically. Only need to touch the power button to release 1wo arms if you want to take out the phone.
- Please purchase the wireless receiver module or case separately (Not included in the product) if your phone do not support wireless charging.
Attention
- Please do not vigorously extrude or collide.
- Please do not dismantle or put it into fire or water when the product is power on, to avoid short circuit or leakage.
- Please do not use it in severely high temperature, high humidity or corrosive environment, to avoid damage to the circuit leakage.
- Please do not put the magnetic strip or chip card (Such as ID card, bankcard etc. Jon the charging pad to avoid to cause magnetic card lose efficacy.
- Please do not put the metal (Such as coin etc.) on the charging pad when charging.to avoid damage from heating.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.