SHIMBOL TP Mini TX Wireless Video Transmission System Instruction Manual

July 31, 2024
Shimbol

SHIMBOL TP Mini TX Wireless Video Transmission System

Instruction Manual Shenzhen ZO Video TechnologyCo.Ltd.

Features

Packing list

  1. Transmitter*1
  2. USB Power Cable*1
  3. User Manual*1
  4. Sticker

Product Description

  1. LED Display Status Light
  2. Electric Quantity Button
  3. Pairing Button
  4. Power Switch
  5. HDMI Output(TX)
  6. HDMI input(TX)
  7. USB Port
  8. Battery Plate
    • Press the 2 button to check the battery level, 4 green lights indicate the battery level. When connected to USB, the green light is on.
    • The pairing button is in production mode, and the client does not need to pair.

Technical Parameters

| Transmitter
---|---


Interface

| HDMI Input /HDMI Output
Power Supply Method| USB 5V/NP-F Battery
Power Consumption| (2.5W
HDMI Input| 720P@50/60Hz

1080PO24/25/30/50/60Hz

HDMIOutput| 720PO50/60Hz

1080P@24/25/30/50/60Hz

Weight| 113g


Size

| ****

10363.516mm

Transmission Frequency Band| U-NII-1:5180MHz-5240MHz U-NII-3:5745MHz-5825MHz


Transmit Power

| ****

7mW/MHz

Transmission Delay| ****

70ms

Receiving Sensitivity| ****

-85dBm

The TP Mini TX’s WIFI module works as A WIFI AP. When startup, The AP will waiting for the TP Mini RX WIFI module [has been paired with TP Mini TX in factory connecting. When the connection is established, the TP Mini TX will send the video stream to the TP Mini RX.

Tel:+860755-21004986

  • URL: www.zeroone-video.com
  • Address:2C,2nd Floor, Building 6, Longbi Industrial Park
  • No.27 Dafa Road, Bantian Street, Longgang District, Shenzhen
  • Shenzhen ZO Video Technology Co., Ltd.

FCC STATEMENT

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    • This device may not cause harmful interference, and
    • This device must accept any interference received, including interference that may cause undesired operation.
  2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation。

Product Specifications

  • Model: TP Mini TX

  • Transmit Range: 7mW/MHz

  • Power Supply: USB 5V/NP-F Battery

  • Power Consumption: 2.5W

  • Weight: 113g

  • Size: 10363.516mm

  • Transmission Frequency Band:
    U-NII-1:5180MHz-5240MHz, U-NII-3:5745MHz-5825MHz

  • Transmit Power: 7mW/MHz

  • Transmission Delay: 70ms

  • Receiving Sensitivity: -85dBm

Frequently Asked Questions

Q: How do I check the battery level on the TP Mini TX?
A: Press the Electric Quantity Button to check the battery level. Four green lights indicate the battery level.

Q: What is the purpose of the Pairing Button?
A: The Pairing Button is used in production mode and does not require pairing by the client.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals