Shimbol ZO600M ZOlink Series 5.5 Inch Wireless Monitor Instruction Manual

Shimbol ZO600M ZOlink Series 5.5 Inch Wireless Monitor

Monitor Interfaces & Buttons

1. Function Key
2. Power Button
3. HDMI IN
4. HDMI Output
5. 3.5mm Headphone Jack
6. DC IN
7. TF Card Slot
8. Debug Port
9. DC Output
10. NP-F Battery Slot

Monitors Assist Icons

• video input source selection
• wireless connection status
• wireless channel selection

• shows the levels of brightness from an input source
• monitor the level of red, green and blue from an input source
• this is useful for checking if an image is under or over-saturated.
• visualize the dynamic range of your image

• mark through your chosen aspect ratio

• action area and title safe areas displayed

• allows you to see a correctly squeezed image when using anamorphic lenses

• mark image center

• ensure your recordings are always in focus

• zoom in image

Monitors Assist Icons

• use zebra to check exposure and set exposure levels
• a visualization of exposure cross the image
• monochrome display mode

• 3D-LUT loading & updating

• gamma setting

• HDR monitoring

• color temperature setting

• video recording

• video playback

User Interface

Operation Guide

1. Short press the power button to power on, long press for 3 seconds to power off.
2. ZO600M Monitor, it can be switched between TX and RX mode.

Scenario I: ZO600M , connected between the TX and RX.

Scenario II: ZO600M ( TX ) is connected to the other RX devices of Shimbol .

Scenario III: The other TX devices of Shimbol is connected to ZO600M ( RX ).

**3.ZO600M recording & playback functions.  

**

1. Here is for camera position , click up and down for adjustment.
2. Here is for shooting site , click up and down for adjustment.
3. Here is for video serial number, it is not adjustable and the digital number increases with the number of shootings.

Technical Parameters

Please note:

1. Recording file
2. The LUT file to be imported
3. Teleprompter file
4. Latency
   It is under the “Video” folder of root directory in TF card. It is under “Lut” folder of root directory in TF card, and the LUT files should not exceed 50.
   It is under ” Text” folder of root directory in TF card.
   The transmission delay is related to the current electromagnetic environment.

Download “shimbol” APP on Apple App Store.

W52 Band:5GHz product for indoor use only
Tel+86 0755-21004986
URL: www.zeroone-video.com
Address:2C, 2nd Floor, Building 6, Longbi Industrial Park
No.27 Dafa Road, Bantian Street, Longgang District, Shenzhen
Shenzhen ZO Video Technology Co., Ltd.

References

• Shimbol Official Website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>