SHIMBOL M7 7-Zoll Kamera Monitor Camera Monitor Instruction Manual
- June 1, 2024
- Shimbol
Table of Contents
SHIMBOL M7 7-Zoll Kamera Monitor Camera Monitor Instruction Manual
Packing Iist
Buttons And Ports
- Power ON/ OFF Button
- Custom Function Buttons
- HDMI Interfaces
- 3.5mm Headphone Jack
- DC Input
- SD Card Slot
- 1/4″-20Thread Hole
- USB Upgrade Port
- NP-F Battery Plate
- SDI Interfaces
I . Monitors Assist Icons
II. User Interface
III. Operation Guide
1. Boot Method
Short press the power on/off button to turn on the monitor, long press 3 seconds to turn it off.
2. RGB Gain and Offset
3.Format SD Card
4. Shortcut Key Preset
There are two shortcut keys, F1 and F2, F3, on the top of the host, and you can choose function presets.
5.High Precision Waveform
6.Matte
7.Peaking
8.HDR Monitoring
9.3D-LUT Input Method
- Place the LUT file in the LUT folder on the SD card and insert the SD card into the monitor
- Click the Color Menu-3D-LUT, turn on , and then selecting Custom, click the Import button and wait for the system to retrieve the LUT file in the SD card that needs to be loaded
- Click on the LUT file that needs to be loaded, then click Import and wait for the file to be imported into the system
- Click the LUT file, enter the file selection, select the desired LUT, and click to confirm that the LUT is loaded successfully
Note: LUT file name only support English, do not allow any other languages, special characters, spaces, otherwise it will fail to be imported
10.3D-LUT Output Method
- Click the color management-3D-LUT icon, open X select the corresponding LUT file, and the preset LUT color adjustment effect can be recorded into the file synchronously during recording.
- The LUT for HDMI/SDI output is the same as the LUT that is turned on.
11.DCI-P3
IV. Notes
-
Exceptions in Connection
a. Zoom, Anamorphic, Waveform, these three functions can only be opened one at a time. Such as when the Anamorphic function is open, has opened the Zoom or Waveform will be forced to close.
b. When HDMI IN, there is no SDI output. When SDI IN, both HDMI and SDI can be output. -
SD Card Description:
SD Card Identification and Use Problems
a. The SD card of this product does not support hot-swapping, if the SD card is inserted and removed during use, causing abnormalities such as the card cannot be recognized and the screen interface cannot be operated, please restart the device.
b. The newly purchased SD card has to formatting by monitor’s ··so Card Format” function before normal use.
c. The recommended capacity of SD card is 32G-128G
V. Technical Parameters
Please-note:
- The LUT file to be imported. It is under “Lut” folder of root directory in SD card, and the LUT files should not exceed 50.
Tel+86 0755-21004986
URL: www.zeroone-video.com
Address:2C, 2nd Floor, Building 6, Longbi industrial Park
No.27 Dafa Road, Bantian Street, Longgang District. Shenzhen
Shenzhen ZO Video Technology Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>