Whirlpool WIE 2B19 Built In Dishwasher User Guide

Whirlpool WIE 2B19 Built-In Dishwasher

Specifications

• Brand: Whirlpool
• Product Type: Dishwasher
• Model Number: [Insert Model Number]
• Capacity: [Insert Capacity]
• Color: [Insert Color]
• Power Source: Electric
• Energy Efficiency Class: [Insert Class]

Product Usage Instructions

First Time Use

Filling the Salt Reservoir:

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Position the funnel and fill the salt reservoir right up to its edge (approximately 1 kg); some water may leak out.
3. For the first use, fill the salt reservoir with water.
4. Remove the funnel, wipe any salt residue, and securely screw on the cap.
5. Ensure no detergent enters the container during the wash cycle to avoid damage.

Filling the Rinse Aid Dispenser:

Rinse aid should be filled when the indicator light is lit. Do not pour rinse aid directly into the tub.

Programs Table

Program| Description| Duration| Water Consumption (litres/cycle)| Energy Consumption (kWh/cycle)
---|---|---|---|---
1.| [Program Description]| 3:20| 9.5| 0.64

FAQ

• Q: When should I fill the salt reservoir?
  • A: The salt reservoir should be filled when the SALT REFILL indicator light in the control panel is lit.
• Q: How do I know when to fill the rinse aid dispenser?
  • A: The RINSE AID REFILL indicator light in the control panel will indicate when to fill the rinse aid dispenser.

Quick Guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.whirlpool.eu/register

Before using the appliance carefully read the Safety Instructions

CONTROL PANEL

1. ON-OFF/Reset button with indicator light
2. Program selection button
3. Salt refill indicator light
4. Rinse Aid refill indicator light
5. Program number and delay time indicator
6. Tablet indicator light
7. Display
8. Multizone indicator lights
9. Multizone button
10. Delay button
11. Turbo button with indicator light
12. Power Clean button with indicator light
13. START/Pause button with indicator light / Tab

FIRST TIME USE

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be filled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out.
3. Only the first time you do this: fill the salt reservoir with water.
4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair). Whenever you need to add salt, it is mandatory to complete the procedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

• Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE
• AID REFILL indicator light in the control panel is lit.
• NEVER pour the rinse aid directly into the appliance A tub.

PROGRAMS TABLE

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com Pre-treatment of the dishes is not needed before any of the programs.

• Not all options can be used simultaneously.
• Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.

OPTIONS AND FUNCTIONS

Please scan the QR code on your product in order to have more detailed information.

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.

• MULTIZONE – If there are not many dishes to be washed, a half-loading may be used in order to save water, electricity and detergent. By default the appliance washes dishes in all racks.

• DELAY – The start time of the program may be delayed for a period of time between 1 and 12 hours.
  The DELAY function cannot be set once a wash cycle has been started.

• TURBO – This option can be used to reduce the duration of the main programs while maintaining the same washing and drying performance levels

• POWER CLEAN® – Thanks to the additional power jets this option provides a more intensive and powerful wash in the lower rack, in the specific area. This option is recommended for washing pots and casseroles

• TABLET (Tab)- If you use powder or liquid detergent, this option should be off

• OPERATION INDICATOR – A LED light projected on the floor indicates that the dishwasher is working.
  One of the following operating modes can be selected:

  • a) Disabled function.
  • b) When the cycle starts the light goes on for few seconds, stays off during the cycle and flashes at the end of the cycle.
  • c) The light stays on during the cycle and flashes at the end of the cycle (default mode).

NaturalDry is a convection drying system that automatically opens the door during/after drying phase to ensure exceptional drying performance every day. Door opens at the temperature that is safe to your kitchen furniture, thus door will not be opened when the option of TURBO is on.

LOADING THE RACKS

CAPACITY: 14 standard place-settings

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm. The lower rack has tip-up supports which can be used in a vertical position when arranging plates or in a horizontal position (lower) toload pans and salad bowls easily.

POWER CLEAN®

Power Clean® uses the special water jets in the rear of cavity to wash more intensively the high dirty items. The lower rack has a Space Zone, a special pull-out support in the rear of the rack that can be used to support frying pans or baking pans in upright position, thus taking up less space. Placing the pots/casseroles faced to the Power Clean® component please activate the POWER CLEAN on the panel.

CLEANING AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY

In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

CLEANING THE SPRAY ARMS

• To remove the upper spray arm, turn the plastic locking ring in a clockwise direction.
• The lower spray arm may be removed by pulling it upwards

TROUBLESHOOTING

Please scan the QR code on your product in order to have more detailed information

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific Regulation requirements.

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales

Service, please state the codes provided on your product’s identification plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>