Bowrif LF-QP07B-7W Wifi LED Bulb User Manual

: June 6, 2024
: Bowrif

Table of Contents

Download APP and add devices
APP Function
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LF-QP07B-7W Wifi LED Bulb
USER MANUAL

Product Name: WIFI LED BULB (RGBCW)

Download APP and add devices

Please click: How to connect Smart Device to my home network?
Before Setting:

Install the App：
Search for “Magic Home Pro” on the App Store or Google Play Store, or scan the QR code below to download it.
http://app.magichue.net/download/mgchomepro/AppDown.aspx
(Important) connect your phone to your home wifi network(2.4GHz WiFi only)
Power on the device

Now Setting:

Step 1：Register/Login account
If this is your first time to configure smart devices through the App, please register your Magic Home Pro cloud account first, Please refer to How to create a Magic Home App cloud account?

Step 2: Add Devices
Open the App and click the “+” button in the upper right corner, then select “connect device to wi-fi network”.
Bowrif LF-QP07B 7W Wifi LED Bulb - FIGURE 1 Step 3: Open phone wi-fi interface and connect to the “LEDnetxxxxx” signal
Please open the mobile phone wi-fi interface according to the App prompt, and then select the “LEDnetxxxxx” wi-fi signal which comes from our smart device. After a successful connection, go back to the Magic Home Pro App.
Bowrif LF-QP07B 7W Wifi LED Bulb - FIGURE 2 Note: if you can not find the “LEDnetxxxxx” wifi signal, you need to reset the smart device.
Please click: How to reset the WiFi Smart Light?

Bowrif LF-QP07B 7W Wifi LED Bulb - FIGURE 3

Reset successful: the light will flash for a few second

Bowrif LF-QP07B 7W Wifi LED Bulb - FIGURE 4

You can see the “LEDnet*****” WiFi signal in the phone wi-fi list. (If not, please try to restart the phone wi-fi and wait for the automatic refresh)

Step 4: Connect to your home network
Select your home network in the wi-fi list and enter the correct WiFi password.

Bowrif LF-QP07B 7W Wifi LED Bulb - FIGURE 5

Note: after this step, the “LEDnetxxxxx” signal will disappear. If the wi-fi router password you input is incorrect, the smart device has to be reset before reconfiguration again.

Step 5: Setting Completion
Enter the device name and click “complete”.
Step 6： Enable remote function (optional)
The remote access function must have been enabled in order to achieve remote control, Alexa voice control, Google Home control, Siri shortcut voice control, widgets, and other functions. Otherwise, they can not work.
Regularly, The remote access function will be automatically enabled after adding the device. You can refer to “How do I check if remote access is enabled?“

APP Function

Support 16 million colors control and brightness adjustment
You choose your favorite color and long-press DIY button to save it. You can display this color and brightness for your need easier and faster next time.
You can adjust warm white and cold white separately.
Support color temperature control and brightness adjustment
Choose your favorite color temperature and long-press the DIY button to save it. You can display this color temperature and brightness for your need easier and faster next time.
Dynamic Mode
20 programmed built-in dynamic modes including colorful gradual change, cross fade jump change, and strobe flash for your choices. Speed can be set. And you can DIY the dynamic Mode.
Microphone Function
Lighting will change as per the volume/noise from outside like a microphone. It works when playing music with the speaker. The lighting will dance based on a different rhythm. The microphone sensitivity can be adjusted by the slider.
Music Function
Select your music songs on your smartphone and play them, lighting will dance based on rhythm.
Camera Function
Manual mode: Capture color by hand and lighting will change to the color you select.
Auto mode: Lighting changes automatically when the camera has a color.
Grouping operation

|
---|---
Bowrif LF-QP07B 7W Wifi LED Bulb - FIGURE 11 |
8. Timer setting

IOS system can add the widget. (Also can support Android system)
As for the IOS system, how can I use Siri shortcut?
Siri can’t control a certain product directly, but it can control a scene instead. At present, only IOS12.0 and above system supports the Siri built-in shortcut function, please see the operation as below:
• Open the App, click the “+” button at the upper left corner to create a scene, edit the scene name, add the scene task and save the scene.
• Then click the “add to Siri” icon to enter Siri Settings.
• Long press the red button on the phone to record a personalized phrase as a command to trigger the scene. For example, you can create a phrase as: “I’m back”.