MEAN WELL LPF-90-36 Constant Voltage Plus Constant Current LED Driver Owner’s Manual

: July 30, 2024
: MEAN WELL

Table of Contents

Features
Applications
Description
SPECIFICATION
BLOCK DIAGRAM
OUT PUT LOAD vs TEMPERATURE
MECHANICAL SPECIFICATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

90W Constant Voltage + Constant Current LED Driver
LPF – 90 series

Features

Constant Voltage + Constant Current mode output
Plastic housing with Class II design
Built-in active PFC function
Class 2 power unit
Fully encapsulated with IP67 level
Typical lifetime>50000 hours
5 years warranty

Applications

LED panel lighting
LED downlight
LED decorative lighting
LED tunnel lighting
Moving sign
Type “HL” for use in Class I, Division 2 hazardous (Classified) location.

GTIN CODE
MW Search: https://www.meanwell.com’serviceGTIN.aspx

Description

LPF-90 series is a 90W AC/DC LED driver featuring the dual modes constant voltage and constant current output. LPF-90 operates from 90~305VAC and offers models with different rated voltage ranging between 15V and 54V. Thanks to the hign efficiency up to 91%, with the fanless design, the entire series is able to operate for -40°C ~ +70°C case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations.

Model Encoding

SPECIFICATION

MODEL| LPF-90-15| LPF-90-20| LPF-90-24| LPF-90-30| LPF-90-36| LPF-90-42| LPF-90-48| LPF-90-54
---|---|---|---|---|---|---|---|---
OUTPUT| DC VOLTAGE| 15V| 20V| 24V| 30V| 36V| 42V| 48V| 54V
CONSTANT CURRENT REGION Note.2| 9 ~ 15V| 12 ~ 20V| 14.4 ~ 24V| 18 ~ 30V| 21.6 ~ 36V| 25.2 ~ 42V| 28.8 ~ 48V| 32.4 ~ 54V
RATED CURRENT| 5A| 4.5A| 3.75A| 3A| 2.5A| 2.15A| 1.88A| 1.67A
RATED POWER Note.5| 75W| 90W| 90W| 90W| 90W| 90.3W| 90.24W| 90.18W
RIPPLE & NOISE (max.) Note.3| 150mVp-p| 150mVp-p| 150mVp-p| 200mVp-p| 200mVp-p| 200mVp-p| 200mVp-p| 200mVp-p
VOLTAGE TOLERANCE Note.4| ±4.0%| ±4.0%| ±4.0%| ±4.0%| ±4.0%| ±4.0%| ±4.0%| ±4.0%
LINE REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION| ±1.5%| ±1.0%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
SETUP, RISE TIME Note.6| 1200ms, 200ms / 115VAC       500ms, 200ms / 230VAC
HOLD UP TIME (Typ.)| 16ms/230VAC         16ms/115VAC
INPUT| VOLTAGE RANGE       Note.5| 90 ~ 305VAC        127 ~ 431VDC
(Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR| PF≧0.97/115VAC, PF≧0.96/230VAC, PF≧0.92/277VAC@full load
(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
TOTAL HARMONIC DISTORTION| THD< 20%(@load¾60%/115VC,230VAC; @load¾75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.)| 89%| 90%| 90.5%| 91%| 91%| 91%| 91%| 91%
AC CURRENT| 0.95A / 115VAC        0.5A / 230VAC        0.4A / 277VAC
INRUSH CURRENT(Typ.)| COLD START 70A(twidth=435μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 240VAC
PROTECTION| OVER CURRENT| 95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 18 ~ 21V| 23 ~ 27V| 28 ~ 34V| 34 ~ 38V| 41 ~ 46V| 47 ~ 53V| 54 ~ 60V| 59 ~ 65V
Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, re-power on to recover
ENVIRONMENT| WORKING TEMP.| Tcase=-40 ~ +70℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+70℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC| SAFETY STANDARDS Note.8| UL8750(type”HL”), CSA C22.2 No.250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, J61347-1, J61347-2-13, EAC TP TC 004, GB19510.1,GB19510.14,IP67 approved ; Design refer to UL60950-1
WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION Note.8| Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load≧60%) ; BS EN/EN61000-3-3, GB/T 17743 , GB17625.1,EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020
OTHERS| MTBF| 3292.9K hrs min.     Telcordia SR-332 (Bellcore) ; 301.7Khrs min.      MIL-HDBK-217F (25℃)
DIMENSION| 1616136mm (LWH)
PACKING| 0.7Kg;20pcs/15Kg/0.73CUFT
NOTE| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to “DRIVING METHODS OF LED MODULE”.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.
9. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70℃ or less.
10. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
11. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
10. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

BLOCK DIAGRAM

DRIVING METHODS OF LED MODULE
※ This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

OUT PUT LOAD vs TEMPERATURE

STATIC CHARACTERISTIC
POWER FACTOR (PF) CHARACTERISTIC

TOTAL HARMONIC DISTORTION (THD)
※ 48V Model, Tcase at 60℃
EFFICIENCY vs LOAD
LPF-90 series possess superior working efficiency that up to 91% can be reached in field applications.
※ 48V Model, Tcase at 60℃

LIFE TIME