Telycam USB 3.0 PTZ 3.0 Video Conference Camera User Manual
- July 30, 2024
- Telycam
Table of Contents
USB 3.0 PTZ 3.0 Video Conference Camera
“`html
Product Information
Specifications
-
Camera Item Number: J.BC.0205
-
Sensor: HD Video Sensor
-
Video System: USB3.0
-
Lens Zoom: Yes
-
Focal length: Adjustable
-
View Angle: Wide Diagonal Viewing Angle
-
Minimum Object Distance: Wide: 1.0m; Tele: 1.5m
-
SNR: >50dB
-
Image parameter: 2D/3D
-
Noise Reduction: Supported
-
Minimum LUX: 0.7lux (50 IRE Max AGC,1/30, F1.8)
-
White Balance:
Auto/Manual/Indoor/Outdoor/Push/Sodium/Fluorescent -
Focus: Auto / Manual
-
Iris: Auto / Manual
-
Electronic Shutter: Auto / Manual
-
BLC Mechanism: Supported
-
Pan Rotation Angle: Adjustable
-
Tilt Rotation Angle: Adjustable
-
Pan Rotation Speed: Adjustable
-
Tilt Rotation Speed: Adjustable
-
Input Voltage: 12V DC
-
Power Consumption: Varies
-
Operating Temperature: Varies
-
Operating Humidity: Varies
-
Color: Black
Product Usage Instructions
Quick Start Guide
- Check all cable connections before powering on the camera.
- DIP Switch Setting (at the bottom of the camera):
- SW-1: 1 OFF, 2 ON, 3 OFF, 4 ON – Function: ARM
- SW-2:
- OFF – Updating mode
- OFF – Debugging mode
- ON – Undefined
- ON – Working mode
Camera Interface
- Camera Lens
- Camera Base
Frequently Asked Questions (FAQ)
Q: How do I adjust the focus of the camera?
A: You can adjust the focus manually using the focus buttons on
the IR remote controller or set it to auto mode through the camera
settings.
“`
USB3.0 HD Video Camera
User Manual
Version V1.0 English
J.BC.0205.
CONTENTS
SAFETY GUIDES……………………………………………………………………………………………………………………………..2
ACCESSORIES………………………………………………………………………………………………………………………………..2 QUICK
START…………………………………………………………………………………………………………………………………3 PRODUCT
HIGHLIGHTS…………………………………………………………………………………………………………………..4 PRODUCT
SPEC……………………………………………………………………………………………………………………………..4 CAMERA
INTERFACE………………………………………………………………………………………………………………………5 CAMERA
DIMENSION…………………………………………………………………………………………………………………….5 IR REMOTE
CONTROLLER……………………………………………………………………………………………………………….6 LEARNING
FUNCTION…………………………………………………………………………………………………………………….7 VISCA IN(RS232)
PORT……………………………………………………………………………………………………………………8 VISCA
PROTPCOL…………………………………………………………………………………………………………………………..9 PELCO-D
PROTOCOL…………………………………………………………………………………………………………………….16 PELCO-P
PROTOCOL……………………………………………………………………………………………………………………..17 OSD
MENU………………………………………………………………………………………………………………………………….18 UVC
CONTROL……………………………………………………………………………………………………………………………..22
1
SAFETY GUIDES
1.Before operation, please fully read and follow all instructions in the
manual. For your safety, always keep this manual with the camera. 2.The camera
power input range is 100-240VAC(50-60Hz),ensure the power supply input within
this rate before powering on. 3.The camera power voltage is 12VDC, rated
currency is 2A. We suggest you use it with the original power supply adapter
supplied by the factory. 4.Please keep the power cable, video cable and
control cable in a safe place. Protect all cables especially the connectors.
5.Operational environment: 0-50, humidity less than 90%.To avoid any danger,
do not put anything inside the camera, and keep away from the corrosive
liquid. 6.Avoid stress, vibration and damp during transportation, storage and
installation. 7.Do not dismantle the camera housing and cover. For any
service, please contact authorized technicians. 8.RF cable and control cable
should be individually shielded, and cannot be substituted with other cables.
Do not direct the camera lens towards strong light, such as the sun or the
intensive light. 9.Use a dry and soft cloth to clean the camera housing.
Applied with neutral cleaning agent when there is need to clean. To avoid
damage on the camera lens, never use strong or abrasive cleaning agents on the
camera housing. 10.Do not move the camera by holding the camera head. To avoid
mechanical trouble, do not rotate the camera head by hand. 11.Put the camera
on fixed and smooth desk or platform, avoid leaned installation. 12. Power
Supply Polarity(Drawing)
ACCESSORIES
Check all bellow items when open the Camera······························································································ 1 Power Adapter ·················································································· 1 Power Cable ······················································································ 1 RS232 Control Cable·········································································· 1 USB3.0 Cable……………………………………………………………………………….. 1 Remote Controller············································································· 1 User Manual ····················································································· 1 Double-sided Adhesive……………………………………………………………….. .1
package:
2
QUICK START
1.Check all cable connections before power on.
2.DIP Switch Setting (at the bottom of the camera):
SW-1 1 OFF 2 ON 3 OFF 4 ON
FunctionARM
SW-2
Instruction
OFF
Updating mode
OFF
Debugging mode
ON
Undefined
ON
Working mode
Function IR CODE TYPE
SW-3 SW-4
Instruction
1 ON
ON
Working mode
2 ON
OFF
Updating ISP mode
3 OFF
ON
4 OFF
OFF
Undefined Undefined
SW-5 1 OFF 2 ON 3 OFF 4 ON
Function USB
SW-6
Instruction
OFF
Working mode
OFF
Updating mode
ON
Undefined
ON
Undefined
3
PRODUCT HIGHLIGHTS
· Adopts advanced DSP1/2.8 inch 2.4MP image sensor, and high quality 20X
60degree FOV optical lens,
to output crystal clear image, max up to 1080p60 full high definition
resolution.
· Fast switching between different video formats: less than 1 second. · 20X
Optical Zoom + 12XDigital Zoom. · Fast and accurate focus performance. · Easy
firmware upgrade-(field-upgradable). · Power via a USB3.0 port directly, with
no need for the power supply adaptor, which makes deployment
even more simple, a single cable enables power, video, and control.
· Effective RS232/485 serial control. Up to 128 presets. · Compatible with the
majority of videoconferencing software (UVC1.5 protocol standard). · With
powerful functional remote controller. · IR transfer/IR pass function: except
receiving the camera remote controller signal, the camera can also
receive other codec’s IR remote control signal, and pass these IR control
signal to the codec’s IR receiver (via VISCA IN port).
· Multi-language OSD menu: English, Chinese.
PRODUCT SPEC
Camera Item Number Sensor
Video System
Lens Zoom Focal length View Angle Vertical viewing angle Diagonal viewing
angle
Meet+ 20-U3 TLC-300-U3-20P 1/2.8-inch high-quality 2.4MP HD CMOS sensor USB3.0 YUY2: 19201080P60/50/30/25; 1280720P60/50/30/25; 1024576P60/50/30/25; 640480P60/50/30/25; 640360P60/50/30/25 USB2.0 YUY2: 1280720P25; 1024576P30/25; 640480P50/30/25; 640*360P60/50/30/25 20x optical zoom, 12x digital zoom f = 4.9 ~ 98mm, F1.5 ~ F3.0 60° (Wide) ~ 3.2° (Tele) 32.2° ~ 1.8° 61° ~ 3.64°
4
Minimum Object Distance SNR Image parameter Noise Reduction Minimum LUX White Balance Focus Iris Electronic Shutter BLC Mechanism Pan Rotation Angle Tilt Rotation Angle Pan Rotation Speed Titl Rotation Speed Preset Control Video Port: General Input Voltage Power Consumption Operating Temperature Operating Humidity Color Camera Dimension Package Dimension Package Content
Wide: 1.0m; Tele: 1.5m >50dB
2D/3D 0.7lux (50 IRE Max AGC,1/30, F1.8)
Auto/Manual/Indoor/Outdoor/Push/Sodium/Fluorescent Auto / Manual Auto / Manual
Auto / Manual Supported
-170° ~ +170° -30° ~ +90° 0°~120°/s 0°~80°/s 128 presets via RS232, 10 presets via remote controller RS232/RS485/USB/Remote Controller USB3.0
5V 1000mA(via USB 3.0)/ DC: 12V 2A(via Power Adapter) DC: 12V 2A (Pmax=8W)
-10~ 50 80% Silver 220mm×190mm×173mm 32x30x31cm Camera, Remote Controller,
RS232 cable, USB3.0 cable, Power Supply
5
CAMERA INTERFACE
1. Camera Lens
2. Camera Base 3. IR Receiver Panel 4. Indicator Light
5. Dial Switch
6. Tripod Screw Hole 7. Installation Hole 8. Power Indicator light(red)
CAMERA DIMENSION(MM)
9. 12VDC Power Input 10. RS232(VISCA IN) Port 11. USB3.0 Port
6
IR REMOTE CONTROLLER
LED Function Instruction Press any button and shows in red color: Current
selection is to control the camera. Press any button and shows in green color:
Current selection is to control the codec. Press any button and shows in blue
color: Current selection is to control the TV.
Power button Red button: in normal work mode, short press one time, camera
will enter standby mode; short press again, the camera will start self-
configuration and go to HOME position; it will go to No.0 preset position if
that was set. Green button: Codec power button(need to learn the button
coding). Blue button: TV power button( need to learn the button coding).
Focus (Left): +/Manual focus, only valid under manual focus model. Zoom
(Right): +/Control the lens zoom rate. Navigate : Up/Down/Left/Right In normal
working mode, use navigate key to control pan/tilt.
Confirm/Home button: In normal working mode, short press to let the camera go
back to Home position.
Menu button: Enter the OSD menu.
Number buttons Set Preset: Long press(3seconds) the number button to save preset.
Clear Preset:
+number button to clear the relative preset.
Long press(3seconds) the Clear button to clear all preset.
Run Preset: Short press the number button to run the relative preset.
7
LEARNING FUNCTION
1.Press the green button, the LED indicator light will show in green color for
1 second, means switch to video terminal/codec control mode. 2.Single Button
Coding: long press(3seconds) Home +number”1″ button simultaneously, the green
indicator LED will light, enter button learning mode, press the buttons which
need to be learned, LED will start flickering(1HZ), now can start button
learning: get the codec remote point to the camera remote’s infrared tube(
about 10cm distance), then press the button which need to be learned, the LED
re-flickering when learning finishes ; press other buttons which also need to
be learned; Press the Home+”0″ buttons simultaneously to exit and save all
remote data. If the button learning fails, the camera will enter normal
working mode after 15seconds, LED will extinguish. 3. All Button Coding: long
press (3seconds) Home+number”2″ button simultaneously, the green indicator LED
will start flickering(1HZ), to enter all button learning mode: get codec
remote point to the camera remote’s infrared tube( about 10cm distance), to
start all button coding mode, the LED will extinguish when learning finished.
If the button learning fails, the camera will enter normal working mode after
15seconds, LED will extinguish. 4. All Button Sending Mode: long press
(3seconds) the Menu+ number “3” button simultaneously, the remote will enter
all button sending mode. 5. Similar operation for the TV control mode
learning.
8
VISCA IN (RS232) PORT
No.
Function
1
DTR
2
DSR
3
TXD
4
GND
5
RXD
6
A
7
IR OUT
8
B
VISCA IN &RS485 Connection
Camera VISCA IN
RS485
1
DTR
2
DSR
3
TXD
4
GND
GND
5
RXD
6
A(+)
A(+)
7
IR OUT
8
B(-)
B(-)
VISCA IN &DB9 Connection
Camera VISCA IN
Windows DB-9
1
DTR
6
DSR
2
DSR
4
DTR
3
TXD
2
RXD
4
GND
5
GND
5
RXD
3
TXD
6
A(+)
7
IR OUT
8
B(-)
SERIAL PORT CONFIGURATION:
Parameter Baud rate Start Bit Date Bit
Value 2400/4800/9600/115200
1 bit 8 bit
Parameter Stop Bit Verify Bit
Value 1bit None
9
VISCA PROTOCOL
Part1 Camera Return Command
ACK Completion
Command Packet z0 41 FF z0 51 FF
z = camera adderss+8
Ack/Completion Message Note
Returned when the command is accepted. Returned when the command has been
executed.
Syntax Error
Command Not Executable
Command Packet z0 60 02 FF
z0 61 41 FF
Part2 Camera Control Command
Error Messages
Note
Returned when the command format is different or when a command with illegal
command parameters is accepted
Returned when a command cannot be executed due to current conditions. For
example, when commands controlling the focus
manually are received during auto focus.
Command AddressSet IF_Clear CAM_Power
CAM_Zoom
CAM_Focus
CAM_ZoomFocus CAM_WB
Function Broadcast Broadcast On Off Stop Tele(Standard) Wide(Standard)
Tele(Variable) Wide(Variable) Direct Stop Far(Standard) Near(Standard) Direct
One Push AF
Direct
Auto Indoor
Command Packet 88 30 01 FF 88 01 00 01 FF 8x 01 04 00 02 FF 8x 01 04 00 03 FF
8x 01 04 07 00 FF 8x 01 04 07 02 FF 8x 01 04 07 03 FF 8x 01 04 07 2p FF 8x 01
04 07 3p FF
8x 01 04 47 0p 0q 0r 0s FF
8x 01 04 08 00 FF 8x 01 04 08 02 FF 8x 01 04 08 03 FF 8x 01 04 48 0p 0q 0r 0s
FF 8x 01 04 18 01 FF
8x 01 04 47 0p 0q 0r 0s 0t 0u 0v 0w FF
8x 01 04 35 00 FF 8x 01 04 35 01 FF
Note Address setting I/F Clear Power ON/OFF
p = 0(low)~7(high) pqrs: Zoom Position (0(wide) ~0x4000(tele))
pqrs: Focus Position pqrs: Zoom Position (0(wide)~ 0x4000(tele)) tuvw: Focus
Position
10
Command
CAM_RGain CAM_Bgain CAM_AE CAM_Shutter CAM_Iris CAM_Gain CAM_Bright
Function Outdoor OnePush ATW Manual Sodium Lamp Fluorescent lamp Reset Up Down Direct Reset Up Down Direct Full Auto Manual Shutter Priority Iris Priority Bright Reset Up Down Direct Reset Up Down Direct Reset Up Down Direct Reset
Command Packet 8x 01 04 35 02 FF 8x 01 04 35 03 FF 8x 01 04 35 04FF 8x 01 04 35 05 FF 8x 01 04 35 08 FF 8x 01 04 35 09 FF 8x 01 04 03 00 FF 8x 01 04 03 02 FF 8x 01 04 03 03 FF 8x 01 04 43 00 00 0p 0q FF 8x 01 04 04 00 FF 8x 01 04 04 02 FF 8x 01 04 04 03 FF 8x 01 04 44 00 00 0p 0q FF 8x 01 04 39 00 FF 8x 01 04 39 03 FF 8x 01 04 39 0A FF 8x 01 04 39 0B FF 8x 01 04 39 0D FF 8x 01 04 0A 00 FF 8x 01 04 0A 02 FF 8x 01 04 0A 03 FF 8x 01 04 4A 00 00 0p 0q FF 8x 01 04 0B 00 FF 8x 01 04 0B 02 FF 8x 01 04 0B 03 FF 8x 01 04 4B 00 00 0p 0q FF 8x 01 04 0C 00 FF 8x 01 04 0C 02 FF 8x 01 04 0C 03 FF 8x 01 04 0C 00 00 0p 0q FF 8x 01 04 0D 00 FF
Note
Manual Control of R Gain pq: R Gain (0~0xFF) Manual Control of B Gain pq: B
Gain (0-0xFF) Automatic Exposure mode Manual Control mode Shutter Priority
mode Iris Priority mode Bright mode(Manual control) Shutter Setting pq:
Shutter Position (0~0x15) Iris Setting pq: Iris Position (0~ 0x11) Gain
Setting pq: Gain Positon (0~0x0E) Bright Setting
11
Command
CAM_WDR
CAM_BackLight
CAM_Sharpness
CAM_Preset
CAM_LR_Reverse CAM_PictureFlip CAM_MountMode CAM_Saturation CAM_2D Noise
Reduction CAM_3D Noise Reduction CAM_NewBright CAM_Constrast CAM_Gamma FLICK
SYS_Menu
Function Up Down Direct On Off Direct On Off Reset Up Down Direct Reset Set
Recall On Off On Off UP Down Direct
Direct
Direct
Direct Direct Direct Off 50HZ 60HZ Menu On
Command Packet 8x 01 04 0D 02 FF 8x 01 04 0D 03 FF 8x 01 04 4D 00 00 0p 0q FF
8x 01 04 3D 02 FF 8x 01 04 3D 03 FF 8x 01 04 D3 0p FF 8x 01 04 33 02 FF 8x 01
04 33 03 FF 8x 01 04 02 00 FF 8x 01 04 02 02 FF 8x 01 04 02 03 FF 8x 01 04 42
00 00 0p 0q FF 8x 01 04 3F 00 0p FF 8x 01 04 3F 01 0p FF 8x 01 04 3F 02 0p FF
8x 01 04 61 02 FF 8x 01 04 61 03 FF 8x 01 04 66 02 FF 8x 01 04 66 03 FF 8x 01
04 A4 02 FF 8x 01 04 A4 03 FF 8x 01 04 A1 00 00 00 0p FF
8x 01 04 53 0p FF
8x 01 04 54 0p FF
81 01 04 A4 00 00 0p 0q FF 81 01 04 A2 00 00 0p 0q FF 8x 01 04 5B 0p FF 81 01
04 23 00 FF 81 01 04 23 01 FF 81 01 04 23 02 FF 8x 01 06 06 02 FF
Note
pq: Bright l Positon () WDR ON/OFF pq: WDR Position (1~0x06) BackLight On
BackLight Off
Sharpness Control
pq: Aperture Gain (0~0x04) p: Preset Number(=0 to 127) Corresponds to 0 to 9
on the Remote Commander
Image Flip Horizontal ON/OFF
Image Flip Vertical ON/OFF Mount Up Mount Down (0~0x0E) (0~0x05) (0~0x03)
(0~0x0F) (0~0x0F) (0~0x04)
Turn on the menu
12
Command IR_Transfer IR_Receive
Pan_tiltDrive
Pan-tiltLimitSet
Function Menu Off Transfer On Transfer Off On Off On/Off Up Down Left Right
Upleft Upright DownLeft DownRight Stop AbsolutePosition
RelativePosition Home Reset Set
Clear
Part3 Inquiry Command
Command
CAM_PowerInq CAM_ZoomPosInq CAM_FocusModeInq CAM_FocusPosInq
Command Packet 8x 09 04 00 FF 8x 09 04 47 FF 8x 09 04 38 FF 8x 09 04 48 FF
CAM_WBModeInq
8x 09 04 35 FF
Command Packet
8x 01 06 06 03 FF 8x 01 06 1A 02 FF 8x 01 06 1A 03 FF
8x 01 06 08 02 FF
8x 01 06 08 03 FF
8x 01 06 08 10 FF
8x 01 06 01 VV WW 03 01 FF
8x 01 06 01 VV WW 03 02 FF
8x 01 06 01 VV WW 01 03 FF
8x 01 06 01 VV WW 02 03 FF
8x 01 06 01 VV WW 01 01 FF
8x 01 06 01 VV WW 02 01 FF
8x 01 06 01 VV WW 01 02 FF
8x 01 06 01 VV WW 02 02 FF
8x 01 06 01 VV WW 03 03 FF 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01
06 03 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01 06 04 FF
8x 01 06 05 FF 8x 01 06 07 00 0W 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01 06 07 01 0W
07 0F 0F 0F 07 0F 0F 0F FF
Note Turn off the menu Receive IR(remote commander) CODE from VISCA
communication ON/OFF IR(remote commander)receive ON/OFF
VV: Pan speed 0x01 (low speed) to 0x18 (high speed) WW: Tilt speed 0x01 (low
speed) to 0x14 (high speed) YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD)
W:1 UpRight 0:DownLeft YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit
Position(TBD)
Return Packet
y0 50 02 FF y0 50 03 FF y0 50 0p 0q 0r 0s FF y0 50 02 FF y0 50 03 FF y0 50 0p
0q 0r 0s FF y0 50 00 FF y0 50 01 FF y0 50 02 FF y0 50 03 FF y0 50 04 FF
Note
On Off(Standby) pqrs: Zoom Position Auto Focus Manual Focus pqrs: Focus
Position Auto Indoor mode Outdoor mode OnePush mode ATW
13
y0 50 05 FF
CAM_RGainInq
8x 09 04 43 FF y0 50 00 00 0p 0q FF
CAM_BGainInq
8x 09 04 44 FF y0 50 00 00 0p 0q FF
y0 50 00 FF
y0 50 03 FF
CAM_AEModeInq
8x 09 04 39 FF y0 50 0A FF
y0 50 0B FF
y0 50 0D FF
CAM_ShutterPosInq
8x 09 04 4A FF y0 50 00 00 0p 0q FF
CAM_IrisPosInq
8x 09 04 4B FF y0 50 00 00 0p 0q FF
CAM_GainPosiInq
8x 09 04 4C FF y0 50 00 00 0p 0q FF
CAM_ BrightPosiInq
8x 09 04 4D FF y0 50 00 00 0p 0q FF
CAM_ExpCompModeInq 8x 09 04 3E FF
y0 50 02 FF y0 50 03 FF
CAM_ExpCompPosInq 8x 09 04 4E FF y0 50 00 00 0p 0q FF
CAM_ApertureInq
8x 09 04 42 FF y0 50 00 00 0p 0q FF
CAM_MemoryInq
8x 09 04 3F FF y0 50pp FF
SYS_MenuModeInq
8x 09 06 06 FF y0 50 02 FF
y0 50 03 FF
CAM_LR_ReverseInq
8x 09 04 61 FF y0 50 02 FF
y0 50 03 FF
CAM_PictureFlipInq
8x 09 04 66 FF y0 50 02 FF
y0 50 03 FF
CAM_VersionInq
8x 09 00 02 FF
y0 50 ab cd mn pq rs tu vw FF
IR_Transfer
8x 09 06 1A FF
y0 50 02 FF y0 50 03 FF
IR_Receive
8x 09 06 08 FF
y0 50 02 FF y0 50 03 FF
y0 07 7D 01 04 00 FF
y0 07 7D 01 04 07 FF
IR_ReceiveReturn
y0 07 7D 01 04 38 FF y0 07 7D 01 04 33 FF
y0 07 7D 01 04 3F FF
y0 07 7D 01 06 01 FF
Pan-tiltPosInq
8x 09 06 12 FF
y0 50 0w 0w 0w 0w 0z 0z 0z 0z FF
Note:x means the camera address ;y=x + 8.
Manual pq: R Gain pq: B Gain Full Auto Manual Shutter priority Iris priority Bright pq: Shutter Position pq: Iris Position pq: Gain Position pq: Bright Position On Off pq: ExpComp Position pq: Aperture Gain pp: Memory number last operated. On Off On Off On Off
On Off On Off Power ON/OFF Zoom tele/wide AF On/Off CAM_Backlight CAM_Memory Pan_tiltDrive wwww: PanPosition Position
zzzz: Tilt
14
VISCA PAN TILT ABSOLUTE POSITION VALUE
Pan Angle
VISCA Value
-170
0xF670
-135
0xF868
-90
0xFAF0
-45
0xFD78
0
0x0000
45
0x0288
90
0x0510
135
0x0798
170
0x0990
Tilt Angle -30 0 30 60 90
0xFE50 0x0000 0x01B0 0x0360 0x510
VISCA Value
VISCA PAN TILT SPEED VALUE
Pan(degree/second)
0
0.3
1
1
2
1.5
3
2.2
4
2.4
5
2.6
6
2.8
7
3.0
8
3.2
9
3.4
10
3.8
11
4.5
12
6
13
9
14
15
15
19
16
25
17
32
18
38
19
45
20
58
21
75
22
88
23
105
24
120
tilt(degree/second)
0
0.3
1
1
2
1.5
3
2.2
4
3.6
5
4.7
6
6
7
8
8
10
9
12
10
15
11
18
12
23
13
30
14
39
15
48
16
59
17
69
18
80
60/30mode 50/25mode
21
1/10000
1/10000
0
Shutter
20
speed
19
1/6000 1/4000
1/6000 1/3500
Iris
1 2
18
1/3000
1/2500
3
17
1/2000
1/1750
4
close F14 F11 F9.6 F8
15
16
1/1500
1/1250
15
1/1000
1/1000
14
1/725
1/600
13
1/500
1/425
12
1/350
1/300
11
1/250
1/215
10
1/180
1/150
9
1/125
1/120
8
1/100
1/100
7
1/90
1/75
6
1/60
1/50
5
1/30
1/25
4
1/15
1/12
3
1/8
1/6
2
1/4
1/3
1
1/2
1/2
0
1/1
1/1
0
0dB
1
2
Gain
3
4
5
6
7
2dB 4dB 6dB 8dB 10dB 12dB 14dB
5
F6.8
6
F5.6
7
F4.8
8
F4
9
F3.4
10
F2.8
11
F2.4
12
F2
13
F1.6
16
f2.0
17
f1.8
8
16dB
9
18dB
10
20dB
Gain
11
22dB
12
24dB
13
26dB
14
28dB
15
30dB
16
PELCO-D PROTOCOL
Function Up Down Left
Right Upleft Upright DownLeft DownRight Zoom In
Zoom Out Focus Far Focus Near Set Preset Clear Preset Call Preset
Query Pan Position Query Pan Position Response Query Tilt Position Query Tilt
Position Response Query Zoom Position Query Zoom Position Response
Byte1 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
Byte2 Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address
Byte3 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Byte4 0x08 0x10 0x04 0x02 0x0C 0x0A 0x14 0x12 0x20 0x40 0x80 0x00 0x03 0x05 0x07 0x51 0x59 0x53 0x5B 0x55 0x5D
Byte5 Pan Speed Pan Speed Pan Speed
Pan Speed Pan Speed Pan Speed Pan Speed Pan Speed 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0x00 Value High Byte 0x00 Value High Byte 0x00 Value High Byte
Byte6 Tilt Speed Tilt Speed Tilt Speed
Tilt Speed Tilt Speed Tilt Speed Tilt Speed Tilt Speed 0x00
0x00 0x00 0x00 Preset ID Preset ID Preset ID
0x00 Value Low Byte 0x00 Value Low Byte 0x00 Value Low Byte
Byte7 SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM SUM
17
PELCO-P PROTOCOL
Function Up Down Left Right Upleft
Upright DownLeft DownRight Zoom In Zoom Out Focus Far
Focus Near Set Preset Clear Preset Call Preset Query Pan Position Query Pan
Position Response Query Tilt Position Query Tilt Position Response Query Zoom
Position Query Zoom Position Response
Byte1 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0 0xA0
Byte2 Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address
0xA0 Address
0xA0 Address
0xA0 Address
0xA0 Address
0xA0 Address
Byte3 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Byte4 0x08 0x10 0x04 0x02 0x0C 0x0A 0x14 0x12 0x20 0x40 0x80 0x00 0x03 0x05 0x07 0x51 0x59 0x53 0x5B 0x55 0x5D
Byte5 Pan Speed Pan Speed Pan Speed Pan Speed Pan Speed
Pan Speed Pan Speed Pan Speed 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 Value High Byte 0x00 Value High Byte 0x00 Value High
Byte
Byte6 Tilt Speed Tilt Speed Tilt Speed Tilt Speed Tilt Speed
Tilt Speed Tilt Speed Tilt Speed 0x00 0x00 0x00
0x00 Preset ID Preset ID Preset ID 0x00 Value Low Byte 0x00 Value Low Byte
0x00 Value Low Byte
Byte7 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF 0xAF
Byte8 XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR XOR
18
OSD MENU
1.under working mode, press the menu button
on the IR remote, to enter the OSD menu .
2.Use the navigate button to select the main menu. Once been selected, the main menu will change to grey color
background, and the right side will show all parameters under this sub menu :
3.Press the right navigate button to enter sub menu, use up and down navigate button to select parameter.
4. Press the menu button
again to return to previous menu; Press it continuously to exit the OSD menu.
Before exiting, will show up a window to remind whether need to save all settings ( use left and right button to set).
5.OSD Menu List& Defaulted Setting
LANGUAGE
PROTOCOL
CAMERA SET
ADDRESS BAUD RATE
PARITY BIT
RETURN
ENGLISH/CHINESE
VISCA/PELCO-P/PELCO-D
VISCA:1~7
PELCO-P/D:1~7
2400/9600/115200
NONE
Return to previous menu
VIDEO MODE
It will cause video freeze if switch video mode via OSD menu;
Only recommend to change video mode via UVC control.
RETURN
Return to previous menu
FOCUS
FOCUS MODE
AUTO/MANU/PUSH
19
VISCA 1
9600
AUTO
SENSITIVITY FOCUS LIMIT D_ZOOM ZOOM SPEED LENS INIT
DIS ZOOM RATIO RETURN
Focus Sensitivity setting: LOW/MID/HIGH The target distance: 1.5M/2M/3M/6M/10M
Digital Zoom: OFF/ON
Set zoom speed level:0~7 Lens focus parameter frequency setting, choose EXE to
start the lens focus reset Display zoom value during zooming control Return to
previous menu
MID 1.5M OFF
7 OFF
OFF
WB MODE
Set White Balance mode
ATW
B_GAIN
Set blue gain under manual mode
52
WB MODE
R_GAIN
Set red gain under manual mode
58
RETURN
Return to previous menu
EXPOSURE
EXP MODE SHUT TIME IRIS GAIN BRIGHT SLOW SHUT FLICK RETURN
AUTOMANUBRI.SHUTIRIS Set shutter speed: 1/1~1/10000, Only available under MANU or SHUT mode Set iris value: 0~13, only available under MANU or IRIS mode Set gain value: 0~15, only available under MANU mode Set bright value: 0~27 , only available under MANU mode Slow shutter set: OFF/ON 50HZ/60HZ/OFF Return to previous menu
AUTO 1/100
10 0 11 OFF 50Hz
BRIGHTNESS Set brightness value: 0~15
8
SHARPNESS Set sharpness value: 0~63
40
CONSTRAST Set contrast value: 0~63
32
SATURATION Set saturation value: 0~63, the higher value, the stronger color
40
PICTURE
MIRROR
Left/right flip: ON/OFF
OFF
PIC FLIP
Up/down flip: ON/OFF
OFF
FREEZE
ON/OFF
OFF
DEFOG
Set image permeability
OFF
20
RETURN
Return to previous menu
IMAGE ENHANCE
2D NR 3D NR D_WDR GAMMA BACKLIGHT HIGHLIGHT RETURN
ON/OFF OFF/AUTO/1~4 Set dynamic level : OFF/1~6 Set gamma: 0~4 ON/OFF ON/OFF Return to previous menu
OFF AUTO OFF
0 OFF OFF
MASK
MASK SWITCH COLOUR INDEX INDEX SWITCH
ROW START ROW END LINE START LINE END RETURN
Privacy zone function: ON/OFF Set mask zone color: WHITE/YELLOW/GRAY/GREEN/VIOLET/RED Set mask zone number: 1~8 Set index zone: ON/OFF Set current mask zone’s row start position Set current mask zone’s row end position Set current mask zone’s line start position Set current mask zone’s line end position Return to previous menu
OFF WHITE
1 OFF
0 479 0 539
D/N MODE
Set D/N mode: DAY/NIGHT/AUTO
DAY
DAY TO NIGHT Set day to night brightness threshold value: 15~200
49
NIGH TO DAY Set night to day brightness threshold value: 5~190
20
D/N MODE SWITCH DELAY Set switch delay between different mode, to avoid repeat
5
switching under AUTO mode: 1~60s
GAIN LIMIT
Gain limit under low light:2/4/6/8/11/16/32/64/128/256/320/511 511
RETURN
Return to previous menu
CAMERA INF.
IMAGE VER. IMAGE DATE
Image firmware version Image firmware release date: YY/MM/DD
21
CONTROL VER. CONTROL DATE BAUDRATE PARITY BIT FRAMERATE RETURN
Control firmware version Control firmware release date: YY/MM/DD Current baud rate value Current control protocol parity bit value Current resolution Return to previous menu
RESET REEST to defaulted value (except the Language): ON/OFF
22
UVC CONTROL
1. Only run the client software after the USB3.0 camera has completed self- configuration(the IR indicator in blue
color and will not flash); otherwise may cause black video issue.
2. Make sure the USB3.0 camera is recognized by the PC Device Manager.
3Make sure the interval of video format switching more than 1 seconds, otherwise black video maybe caused.
4Make sure the interval of control command sending from the server(via USB) to the camera no less than 250ms.
5Support standard UVC interface.
UVC Property
Corresponded VISCA Command
PU_BACKLIGHT_COMPENSATION_CONTROL
8x 01 04 33 02 FF
CY_FX_UVC_PU_BRIGHTNESS_CONTROL
8x 01 04 A4 00 00 0p 0q FF
CY_FX_UVC_PU_CONTRAST_CONTROL
8x 01 04 A2 00 00 0p 0q FF
CY_FX_UVC_PU_SATURATION_CONTROL
8x 01 04 A1 00 00 0p 0q FF
CY_FX_UVC_PU_SHARPNESS_CONTROL
8x 01 04 42 00 00 0p 0q FF
CY_FX_UVC_PU_GAMMA_CONTROL
8x 01 04 5B 0p FF
CY_FX_UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 8x 01 04 35 0p FF
CY_FX_UVC_PU_BACKLIGHT_COMPENSATION_CONTROL
8x 01 04 33 0p FF
CY_FX_UVC_PU_GAIN_CONTROL
8x 01 04 49 00 00 0p 0q FF
CY_FX_UVC_PU_POWER_LINE_FREQUENCY_CONTROL
8x 01 04 AA 0p FF
PU_GAIN_CONTROL
8x 01 04 49 00 00 00 0p FF
CT_ZOOM_ABSOLUTE_CONTROL
8x 01 04 47 0p 0q 0r 0s FF
CT_PANTILT_ABSOLUTE_CONTROL
8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z
FF
CT_PANTILT_RELATIVE_CONTROL
8x 01 06 01 pp qq rr ss FF
CT_ZOOM_RELATIVE_CONTROL
8x 01 04 07 pp FF
23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>