SANUS VDLF28 Full Motion TV Wall Mount Instruction Manual

: July 31, 2024
: SANUS

SANUS VDLF28 Full Motion TV Wall Mount

INSTRUCTION MANUAL

MODEL: VDLF28

GET IT RIGHT THE FIRST TIME

Follow this step-by-step instruction manual to speed up your installation.

Before you begin

Remove the stand from your TV — if attached.

Install any accessories
you may have purchased — if they require the TV to be removed from the wall for assembly. The TV is removable for future accessory purchases.

Protect the face of your TV
when laying it down for installation.

IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ MANUAL PRIOR TO USE – SAVE

THESE INSTRUCTIONS

Please read through these instructions completely to be sure you’re comfortable with this easy install process. Check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service: +1 800-359-5520.

CAUTION: Avoid potential personal injuries and property damage!

This product is designed ONLY to be installed into wood studs, solid concrete or concrete block.
— DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
This product is designed for INDOOR USE ONLY.
The wall must be capable of supporting five times the weight of the TV and mount combined.
Do not use this product for any purpose not explicitly specified by manufacturer.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

TV Weight Limit
(including accessories)

DO NOT EXCEED

If your TV (including accessories) exceeds this weight, this mount is NOT compatible.
Visit SANUS.com or call customer service to find a compatible mount.

Wall Construction

ONLY install on these acceptable wall types.

Call Customer Service +1 800-359-5520

Tools Needed

STEP-1: Attach TV Bracket to TV

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

Parts and Hardware

1.1 Select TV Screw Diameter

Only one screw size fits your TV.

1.2 Select TV Screw Length and Spacers

CAUTION : Verify adequate thread engagement with your screw 01 , washer 02 , spacer 03 combination AND TV bracket 06 .

— Too short will not hold your TV.

— Too long will damage your TV.

1.3 Attach TV Brackets to Your TV

STEP-2: Attach Wall Plate to Wall

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

Parts and Hardware for STEP 2

STEP 2A Attach Wall Plate

CAUTION: Avoid potential personal injury or property damage!

Drywall covering the wall must not exceed 5/8 in. (1.5 cm)
Minimum wood stud size: nominal 2 x 4 in. (5.1 x 10.2 cm) actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
Minimum horizontal space between fasteners:16 in. (40.6 cm)
Stud centers must be verified

Wood Stud Installation

STEP 2B Attach Wall Plate

CAUTION: Avoid potential personal injury or property damage!

● Mount the wall plate 08 directly onto the concrete surface
● Minimum solid concrete thickness: 8 in. (20.3 cm)
● Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
● For concrete applications, arm 11 (STEP 3) must remain centered (horizontally) in wall plate 08 . Keep this in mind when selecting the wall plate location

CAUTION: Avoid potential personal injury or property damage!

Install lag bolts into the slots AS SHOWN.
Three (3) lag bolts at the top.
One (1) lag bolt at the bottom.

Solid Concrete or Concrete Block Installation

STEP-3: Attach TV to Wall Plate

Before starting assembly, verify this part is undamaged. If damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

Parts and Hardware for STEP 3

3.1 Attach Arm Assembly to Wall Plate

NOTE: For WOOD STUD APPLICATIONS, the arm assembly 11 can be slid anywhere along wall plate 08 for optimal positioning of your TV.

3.2 Hang TV onto Arm Assembly

Manage Cables

Adjustments

ONLY if needed, adjust the extension/retraction arm tension with screw E using hex key 13 .

For wood stud applications ONLY:

1. Remove the TV (See PAGE 28).
2. Open cover strips P .
3. Loosen but do not remove, locking screws S .
4. Slide arm 11 to the desired position.
5. Tighten locking screws S .
CAUTION: Avoid potential personal injury or property damage! Always make sure both locking screws S are tightened so the TV is securely fastened to wall plate 08 .
6. Close the cover strips P ,then hang your TV (see STEP 3).

REMOVE THE TV

HEAVY! You may need assistance with this step.

1. Disconnect all cables from the TV.
2. Remove securement screw 12 .
3. Pull down on the release cord R to release the TV.
4. Carefully lift the TV from arm assembly 11 .

REMOVE THE ARM ASSEMBLY

Troubleshooting

a: Use your TV supplied spacer/adapter for flat back TVs (AND you want your TV closer to the wall).

b: Use your TV supplied spacer/adapter and spacer 03 for:

Round (irregular) back TVs
Extra space needed for cables

Dimensions

Specifications

TV Weight Limit: 125 lbs. (56.6 kg)
Wall Construction: Wood studs, solid concrete, or concrete block
Tools Needed: Tape, Pencil, Level, Measure Tape, Screwdriver, Electric Drill, 1/2 in. (13 mm) Socket Wrench, Stud Finder, Awl, 7/32 in. (5.5 mm) Wood Drill Bit, 3/8 in. (10 mm) Concrete Drill Bit, Hammer

Frequently Asked Questions (FAQ)

Q: What should I do if my TV weight exceeds the specified limit?

A: If your TV weight exceeds the limit of 125 lbs. (56.6 kg), this mount is not compatible. Contact customer service or visit
SANUS.com to find a compatible mount for your TV.