Telycam V2.0 4K UHD Mic Video Camera User Guide
- June 13, 2024
- Telycam
Table of Contents
4K UHD Mic Video Camera (V2.0)
J.BC.0205.0143
Product Advantages:
- Ultra-crystal video quality: adopts advanced DSP, 1/2.8 inch 8.42 megapixel sensor and high quality 12 megapixel lens.
- Support Auto Framing: Auto Framing participants at meeting start or enter, leave, or change positions.
- All video, control and power over single USB cable.
- Smart and solid design.
- Plug & play, avoid focal length setting.
- Flexible hinge design: fit for monitor, PC, tripod, wall mount and on desk mounting.
- USB2.0 YUY2/MJPG/H.264 video format, works with Windows, MAC OS, Android, Linux.
- Standard UVC 1.1 protocol, compatible with most VC application.
- Built in dual microphone, pick up distance reach 5m.
Product Features:
- USB2.0 super speed output.
- 12-megapixel fixed lens, 4x digital zoom.
- 120-degree field of viewing.
- Lens distortion rate less than 4% (120°FOV).
- 3840*2160p30 ultra high resolution.
- Without motor inside, zero mechanical failure risk.
- Mirror, Flip, Anti-flicker feature.
- UVC control (via USB port).
- Audio communication protocol: UAC1.0.
- Audio encoding format: PMC.
Model Specification
Sensor | 1/2.8-inch high quality, 8.42-megapixel SONY CMOS sensor |
---|---|
Video Format | YUY2/NV12: |
1280720@15; 1024576@20; 640480@30
MJPG:
38402160@30; 2560 1440@30; 1920 1080@30; 1280720@30; 640480@30
I-1.264/1-1.265:
38402160@30; 2560 1440@30; 1920 1080@30; 1280720@30; 1024576@30;
640480@30
Optical Zoom| 12-megapixel fixed lens
Digital Zoom| 4X
Field of Viewing| 120°
Sensor Resolution| 8.42 megapixel
Control Port| USB2.0 (UVC/UAC)
Video Port| USB2.0
S/N Ratio| >50dB
Focal Length| f=2.20mm
Minimum Lux.| 0.1 lux
White Balance| Auto/Manual
Iris| F 2.2
---|---
Electronic Shutter| Auto
Anti-Flicker| 50HZ/60HZ/OFF
WDR| Supported
Polar distance| 3~5 meters
Sensitivity| -26±2dB RL=2.2KΩ Vs=2.0V
Input Voltage| 4.4~5.25V@500mA (USB port)
Dimension (L x W x H)| 199mm×92.5mm×65mm
Net Weight| 0.32KG
Explanation:
- Lens
- Microphone 1
- Base bracket
- Microphone 2
- Remote receiver 6.Indicator light
Dimension Drawing: (mm)
IR REMOTE CONTROLLER:
Power: Standby/Start camera. (This button is temporarily disabled.)
Image: on/off. Preset: long press for 3 seconds to save the current position
to the corresponding preset, short press to run the preset, only available
when Auto Framing is closed. Navigation keys: up and down, left and right In
normal working mode, it is used to adjust the position of the electric pan
tilt and to select menu items after entering the menu. Home/Confirm key:
In normal working mode, a short press returns the electric pan tilt to the
Home position, which is used to confirm the menu options after entering the
menu. Auto: Turn on Auto Framing.
P/M(Push/Manual): Close Auto Framing, and trigger Auto Framing once.
Zoom keys: +/-
Adjust the magnification of the electronic zoom, only available when Auto
Framing is closed.
OSD MENU:
SYSTEM| LANGUAGE| ENGLISH/CHINESE|
---|---|---|---
PROTOCOL| Optional item: VISCA| Default: VISCA
ADDRESS| VISCA:1-7| Default: 1
BAUDRATE| 2400,4800,9600,115200 optional| Default: 9600
RETURN| Back to the main menu|
EXPOSURE| EXP.MODE| AUTO/MANU| Default: AUTO
---|---|---|---
SHUTTER| Shutter speed:1/301/10000, only valid under MANU mode| Default: 1/100
GAIN| Gain setting:0-15, only valid under MANU mode| Default: 0
FLICK| OFF/50HZ/60HZ| Default: 50HZ
BACKLIGHT| ON/OFF| Default: OFF
GAMMA| 0-15| Default: 8
RETURN| Back to the main menu|
IMAGE| W8 MODE| AUTO/MANU| Default: AUTO
---|---|---|---
B GAIN| Blue gain level:0-256, only valid under manual| Default: 100
R GAIN| Red gain level:0-256, only valid under manual| Default: 100
DEFOG| Set the image permeability: OFF/1-15| Default: OFF
RETURN| Back to the main menu|
QUALITY| 2D NR| Set 20 noise reduction level: ON/OFF| Default: OFF
---|---|---|---
3D NR| Set 3D noise reduction level: OFF/AUTO/1-4| Default: AUTO
SHARPNESS| Sharpness setting:0-15| Default: 8
CONTRAST| Contrast setting:0-15| Default: 8
SATURATION| Saturation setting:0-15| Default: 8
BRIGHT| Bright setting:0-15| Default: 8
RETURN| Back to the main menu|
CTRL| MIRROR| Turn the screen left and right ON/OFF| Default: OFF
---|---|---|---
FLIP| Picture up and down (hoisting mode)| Default: OFF
AUTO FRAME| AUTO/MANU| Default: AUTO
RETURN| Back to the main menu|
RESET| CAM RESET| Reset camera parameter to default
---|---|---
RETURN| Back to the main menu
INFO| CTRL VER| Camera movement control program version
---|---|---
CTRL DATE| Release date of camera movement control program
RETURN| Back to the main menu
Suggested Installation Modes:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>