Telycam TLC-1000-HU2-10 10X HDMI Plus USB Type C HD PTZ Camera User Manual

Telycam TLC-1000-HU2-10 10X HDMI Plus USB Type C HD PTZ Camera

Product Information

Product Usage Instructions

Safety Guides

• Before operation, please fully read and follow all instructions in the manual. For your safety, always keep this manual with the camera.
• The camera power voltage is 12V DC, rated currency is 2A. We suggest you use it with the original power supply adapter supplied by the factory.
• Please keep the power cable, video cable, and control cable in a safe place. Protect all cables, especially the connectors.

Safety Guides (Continued)

Attention: The video quality may be affected by the specific frequencies of electromagnetic field. Never grasp the head of the camera and never move the camera by hand when it is working, otherwise, the mechanism may be destroyed.
Declaration: Instructional Manual is for reference only. Please refer to the actual product. Please contact Customer Service staff for the latest programs and supplementary documentations. In case of any doubt or dispute in the instruction manual, the final interpretation of the company shall prevail.

Use Check

Dial Switch Setting (at the bottom of the camera)

Product Highlights

This product offers the following highlights:

Camera Specifications (1/2)

19201080I60/59.94/50,
1280720P60/59.94/50/30/29.97/25
Video Format (USB Type-C)| MJPG: 19201080P60; 1280960P60; 1280720P60; 1024768P60;
800600P60; 640480P30; 320240P60 YUY2640480P30320*240P30
Video Interface| HDMI, USB Type-C

Camera Specifications (2/2)

Tilt
Flip, Mirroring
Input Voltage| 12V DC
Dimension| Insert dimension measurement here
Net Weight| Insert net weight measurement here
Working Temperature| Insert working temperature range here
Working Humidity| 80%

Interface Description

1. Camera Lens
2. Camera Base
3. IR Receiver Panel
4. Power Indicator Light
5. Dial Switch
6. Tripod Screw Hole
7. Installation Hole
8. Power Indicator
9. DC 12V plug
10. RS232 port
11. HDMI port
12. USB Type-C port

Camera Dimension

Insert camera dimension image or measurement here.

IR Remote Controller

LED Function Instruction:

• Press any button and shows in red color: Current selection is to control the camera;
• Press any button and shows in green color: Current selection is to control the codec;
• Press any button and shows in blue color: Current selection is to control the TV;

Power button:

• Red button: In normal work mode, short press one time, camera will enter standby mode; short press again, the camera will start self-configuration and go to HOME position; it will go to No.0 preset position if that was set;
• Green button: Codec power button(need to learn the button coding);
• Blue button: TV power button(need to learn the button coding);

SAFETY GUIDES

• Before operation, please fully read and follow all instructions in the manual. For your safety, always keep this manual with the camera.
• The camera power voltage is 12V DC, rated currency is 2A. We suggest you use it with the original power supply adapter supplied by the factory.
• Please keep the power cable, video cable and control cable in a safe place. Protect all cables especially the connectors.
• Operational environment: -10℃~50℃, humidity less than 80%.
• To avoid any danger, please keep the camera away from the corrosive liquid.
• Avoid stress, vibration and damp during transportation, storage and installation.
• Do not remove the camera housing and cover. For any service, please contact authorized technicians.
• Video cable and control cable should be individually shielded, and cannot be substituted with other cables. Do not direct the camera lens towards strong light, such as the sun or the intensive light.
• Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent when there is need to clean. To avoid damage on the camera lens, never use strong or abrasive cleaning agents on the camera housing.
• Do not move the camera by holding the camera head. To avoid mechanical trouble, do not rotate the camera head by hand.
• Put the camera on fixed and smooth desk or platform, avoid leaned installation.
• Power Supply Polarity:

Attention！

• The video quality may be affected by the specific frequencies of electromagnetic field.
• Never grasp the head of the camera, and never move the camera by hand when it is working, otherwise, mechanism maybe destroyed.

Declaration：

• Instructional Manual is for reference only. Please refer to the actual product.
• Please contact Customer Service staff for the latest programs and supplementary documentations.
• In case of any doubt or dispute in the instruction manual, the final interpretation of the company shall prevail.

USE CHECK

PACKING LIST

Check all below items when open the package

• Camera ················································· 1PCS
• Power Adapter········································· 1PCS
• Power Cable··········································· 1PCS
• Remote Controller···································· 1PCS
• USB Type-C Cable····································1PCS
• RS232 Cable··········································· 1PCS
• User Manual··········································· 1PCS
• QC PASS··············································· 1PCS

QUICK START

Dial Switch Setting (at the bottom of the camera)

PRODUCT HIGHLIGHTS

• With the most advanced HD DSP, 1/2.8-inch 2.4 million image sensor.
• High-quality 10x 62.5-degree wide-angle optical lens, to ensure the smooth and transparent HD images.
• Independent intellectual property rights of the focus algorithm, fast and accurate focus performance, to ensure that the image remains clear in the process of zooming, focusing process is fast and smooth.
• USB and HDMI output simultaneously.
• HDMI maximum resolution support 1920*1080P60 output, suitable for a variety of occasions.
• USB Type-C multiple compression output, the maximum resolution support MJPG1920*1080P60, suitable for different video software applications.
• USB Type-C support Windows, MAC OS, Android, Linux and other operating systems.
• Using the standard UVC protocol, compatible with most video conferencing software.
• Support image flip function: can be front-mounted, inverted, to meet the requirements of different occasions video framing.
• High-precision motor positioning, quiet and smooth mechanical rotation.
• Support 128 preset bits.
• Support RS232/485 serial port control.
• Standard Sony Visca and Pelco-P/D control protocol.
• Support WDR wide dynamic, 3D noise reduction function.
• Brightness, contrast, hue, saturation, sharpness, gamma, exposure, white balance, gain and other parameters can be adjusted.
• Support user’s own program upgrade.
• Support USB Type-C interface power supply.
• Comes with a multi-functional infrared remote control, easy and fast for users to use.
• Multi-language menu: support Chinese, English, Russian

CAMERA SPEC

10X HD PTZ Camera

Sensor| 1/2.8inch high quality, 2.4 MP CMOS Sensor
 |

HDMI

| 1920*1080P60/59.94/50/30/29.97/25/24

1920*1080I60/59.94/50

Video Format|  | 1280*720P60/59.94/50/30/29.97/25
 |
 | USB

Type-C

| MJPG: 19201080P60; 1280960P60; 1280720P60; 1024768P60; 800600P60; 640480P30; 320240P60 YUY2：640480P30；320*240P30
Video Interface| HDMI, USB Type-C
Focal Length| 4.7mm~47mm
Aperture| F1.6~3.0
View Angel| 62.5°(Wide)~6.43°(Tele)
Lens Magnifications| 10x optical zoom + 4x digital zoom
Rotation Angle| Pan: ±170°; Tilt: -30°~+90°;
Rotation Speed| Pan: 0.1°~120°/s; Tilt: 0.1°~80°/s
Preset| Remote controller: 10; RS232: 128; Accuracy: 0.1°
Control Port| RS232
Protocol| Visca Serial, Pelco-P, Pelco-D
Minimum Lux| 0.1lux
White Balance| Auto / Manual / ATW / Push / Indoor / Outdoor / Color Temperature
Exposure| Auto / Manual /Shutter / Iris / Bright
Focus| Auto / Manual
Iris| Auto / Manual
Shutter| Auto / Manual
Gamma select| Supported
WDR| Supported
BLC| Supported
2D Noise Reduction| Supported
---|---
3D Noise Reduction| Supported
Anti-flicker| OFF, 50Hz, 60Hz
Pan Tilt Flip| Supported
Mirroring| Supported
Input Voltage| DC 12V / USB 5V
Dimension| 148mm×132mm×162mm
Net Weight| 0.9kg(2LBS)
Working Temperature| -10℃~50℃
Working Humidity| ≤80%

INTERFACE DESCRIPTION

1. Camera Lens
2. Camera Base
3. IR Receiver Panel
4. Power Indicator Light
5. Dial Switch
6. Tripod Screw Hole
7. Installation Hole
8. Power Indicator
9. DC 12V plug
10. RS232 port
11. HDMI port
12. USB Type-C port

CAMERA DIMENSION

IR REMOTE CONTROLLER

LED Function Instruction

• Press any button and shows in red color: Current selection is to control the camera;
• Press any button and shows in green color: Current selection is to control the codec;
• Press any button and shows in blue color: Current selection is to control the TV;

Power button

• Red button: in normal work mode, short press one time, camera will enter standby mode; short press again, the camera will start self-configuration and go to HOME position; it will go to No.0 preset position if that was set;
• Green button: Codec power button(need to learn the button coding);
• Blue button: TV power button( need to learn the button coding);
• Focus (Left): +/-
• Manual focus, only valid under manual focus model;
• Zoom (Right): +/-
• Control the lens zoom rate;
• Navigate : Up/Down/Left/Right
• In normal working mode, use navigate key to control pan/tilt;

Confirm/Home button:

In normal working mode, short press to let the camera go back to Home position.

• Menu button: show the camera version.

Number buttons

• Set Preset: Long press(3seconds) the number button to save preset; Clear Preset: Clear+number button to clear the relative preset;
• Long press(3seconds) the Clear button to clear all preset;
• Run Preset: Short press the number button to run the relative preset.

LEARNING FUNCTION：

1. Press the green button, the LED indicator light will show in green color for 1 second, means switch to video terminal/codec control mode;

2. Single Button Coding: long press(3seconds) Home +number”1″ button simultaneously, the green indicator LED will light, enter button learning mode, press the buttons which need to be learned, LED will start flickering(1HZ), now can start button learning: get the codec remote point to the camera remote’s infrared tube( about 10cm distance), then press the button which need to be learned, the LED re-flickering when learning finishes ; press other buttons which also need to be learned; Press the Home+”0″ buttons simultaneously to exit and save all remote data.
   If the button learning fails, the camera will enter normal working mode after 15seconds, LED will extinguish.

3. All Button Coding: long press (3seconds) Home+number”2″ button simultaneously, the green indicator LED will start flickering(1HZ), to enter all button learning mode: get codec remote point to the camera remote’s infrared tube( about 10cm distance), to start all button coding mode, the LED will extinguish when learning finished.
   If the button learning fails, the camera will enter normal working mode after 15seconds, LED will extinguish.

4. All Button Sending Mode: long press (3seconds) the Menu + number “3” button simultaneously, the remote will enter all button sending mode.

5. Similar operation for the TV control mode learning.

VISCA IN (RS232 PORT)

SERIAL PORT CONFIGURATION：

Part1 Camera Return Command

Ack/Completion Message

 | command| Note
ACK| z0 41 FF| Returned when the command is accepted.
Completion| z0 51 FF| Returned when the command has been executed.
Error Messages

 | command| Note

Syntax Error

| ****

z0 60 02 FF

| Returned when the command format is different or when a command with illegal command parameters is accepted.

Command Not Executable

| ****

z0 61 41 FF

| Returned when a command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus.

Part2 Camera Control Command

Command type| function| command|
---|---|---|---
Address Set| Broadcast| 88 30 01 FF| Address setting
IF_Clear| Broadcast| 88 01 00 01 FF| I/F Clear
Command Cancel|  | 8x 21 FF|
CAM_Power| On| 8x 01 04 00 02 FF| Power ON/OFF
Off| 8x 01 04 00 03 FF| Address setting

CAM_Zoom

| Stop| 8x 01 04 07 00 FF|
Tele(Standard)| 8x 01 04 07 02 FF
Wide(Standard)| 8x 01 04 07 03 FF
Tele(Variable)| 8x 01 04 07 2p FF| p = 0(low)~7(high)
Wide(Variable)| 8x 01 04 07 3p FF
Direct| 8x 01 04 47 0p 0q 0r 0s FF| pqrs: Zoom Position (0(wide)

~0x4000(tele))

Direct with speed| ****

8x 0A 04 47 0t 0p 0q 0r 0s FF

| t: spd 0~7

pqrs: Zoom Position (0(wide)

~0x4000(tele))

CAM_DZoom

| ON| 8x 01 04 06 02 FF|
OFF| 8x 01 04 06 03 FF
Combine Mode| 8x 01 04 36 00 FF| Combine with optical zoom control
Separate Mode| 8x 01 04 36 01 FF| Separate with optical zoom control
Stop| 8x 01 04 06 00 FF| Enable In separate mode
Tele (Variable)| 8x 01 04 06 2p FF| Enable In separate mode
Wide (Variable)| 8x 01 04 06 3p FF| Enable In separate mode
Direct| 8x 01 04 46 0p 0q 0r 0s FF| Enable In separate mode

CAM_Focus

| Stop| 8x 01 04 08 00 FF|
Far(Standard)| 8x 01 04 08 02 FF
Near(Standard)| 8x 01 04 08 03 FF
Far (Variable)| 8x 01 04 08 2p FF| p=0 (Low) to 7 (High)
Near (Variable)| 8x 01 04 08 3p FF| p=0 (Low) to 7 (High)

VISCA PROTOCOL

Command type| function| command|
---|---|---|---
 | Direct| 8x 01 04 48 0p 0q 0r 0s FF| pqrs: Focus Position
Auto Focus| 8x 01 04 38 02 FF|
Manual Focus| 8x 01 04 38 03 FF|
One Push AF| 8x 01 04 18 01 FF|

CAM_Zoom Focus

| ****

Direct

| 8x 01 04 47 0p 0q 0r 0s 0t 0u 0v 0w FF| pqrs: Zoom Position (0(wide)~ 0x4000(tele)) tuvw: Focus Position

CAM_WB

| Auto| 8x 01 04 35 00 FF|
Indoor| 8x 01 04 35 01 FF|
Outdoor| 8x 01 04 35 02 FF|
One Push| 8x 01 04 35 03 FF|
ATW| 8x 01 04 35 04 FF|
Manual| 8x 01 04 35 05 FF|
Sodium lamp| 8x 01 04 35 08 FF|
fluorescent| 8x 01 04 35 09 FF|
One Push Trigger| 8x 01 04 10 05 FF|

CAM_R Gain

| Reset| 8x 01 04 03 00 FF| Manual Control of R Gain
Up| 8x 01 04 03 02 FF
Down| 8x 01 04 03 03 FF
Direct| 8x 01 04 43 00 00 0p 0q FF| pq: R Gain (0~0xFF)

CAM_B Gain

| Reset| 8x 01 04 04 00 FF| ****

Manual Control of B Gain

Up| 8x 01 04 04 02 FF
Down| 8x 01 04 04 03 FF
Direct| 8x 01 04 44 00 00 0p 0q FF| pq: B Gain (0-0xFF)

CAM_AE

| Full Auto| 8×01 04 39 00 FF| Automatic Exposure mode
Manual| 8x 01 04 39 03 FF| Manual Control mode
Shutter Priority| 8x 01 04 39 0A FF| Shutter Priority

Automatic Exposure mode

Iris Priority| 8x 01 04 39 0B FF| Iris Priority Automatic Exposure mode
Bright| 8x 01 04 39 0D FF| Bright Mode (Manual control)

CAM_Shutter

| Reset| 8x 01 04 0A 00 FF| ****

Shutter Setting

Up| 8x 01 04 0A 02 FF
Down| 8x 01 04 0A 03 FF
Direct| 8x 01 04 4A 00 00 0p 0q FF| pq: Shutter Position (0~0x15)

CAM_Iris

| Reset| 8x 01 04 0B 00 FF| ****

Iris Setting(0~0xD)

Up| 8x 01 04 0B 02 FF
Down| 8x 01 04 0B 03 FF
Direct| 8x 01 04 4B 00 00 0p 0q FF| pq: Iris Position (0~ 0x11)

CAM_Gain

| Reset| 8x 01 04 0C 00 FF| ****

Gain Setting (0~0x0F)

Up| 8x 01 04 0C 02 FF
Down| 8x 01 04 0C 03 FF
Direct| 8x 01 04 0C 00 00 0p 0q FF| pq: Gain Positon (0~0x0E)

CAM_Bright

| Reset| 8x 01 04 0D 00 FF| ****

Bright Setting

Up| 8x 01 04 0D 02 FF
Down| 8x 01 04 0D 03 FF
Direct| 8x 01 04 4D 00 00 0p 0q FF| pq: Bright l Positon (0~0x1B)
Command type| function| command|
---|---|---|---

CAM_WDR

| On| 8x 01 04 3D 02 FF| Exposure Compensation ON/OFF
Off| 8x 01 04 3D 03 FF
Direct| 8x 01 04 D3 pq FF| pq: ExpComp Position

(0~0x6)

CAM_Back Light(BLC)| On| 8x 01 04 33 02 FF| BackLight On
Off| 8x 01 04 33 03 FF| BackLight Off

CAM_Sharpness

| Reset| 8x 01 04 02 00 FF| ****

Aperture Control

Up| 8x 01 04 02 02 FF
Down| 8x 01 04 02 03 FF
Direct| 8x 01 04 42 00 00 0p 0q FF| pq: Aperture Gain (0~0x0F)

CAM_Memory(preset)

| Reset| 8x 01 04 3F 00 pp FF| pp: Preset Number(=0 to 127) Corresponds to 0 to 9 on the Remote Commander
Set| 8x 01 04 3F 01 pp FF
Recall| 8x 01 04 3F 02 pp FF
CAM_LR_Reverse| On| 8x 01 04 61 02 FF| Image Flip Horizontal ON/OFF
Off| 8x 01 04 61 03 FF
CAM_Picture Flip| On| 8x 01 04 66 02 FF| Image Flip Vertical ON/OFF
Off| 8x 01 04 66 03 FF
CAM_RS485Ctl| On| 8x 01 06 A5 02 FF|
Off| 8x 01 06 A5 03 FF
CAM_Saturation| Saturation| 8x 01 04 A1 00 00 0p 0q FF| pq:saturation level 0x00~0x0f
CAM_Contrast| Contrast| 8x 01 04 A2 00 00 0p 0q FF| pq:Contrast level 0x00~0x0f
CAM_Speed By Zoom| On| 8x 01 06 A0 02 FF|
Off| 8x 01 06 A0 03 FF
CAM_PT Speed| PT Speed| 8x 01 04 C1 00 00 0p 0q FF| pq:PT speed 0x05~0x18
CAM_Zoom Speed| Zoom Speed| 8x 01 04 D1 00 00 0p 0q FF| pq:Zoom speed 0x01~0x07
CAM_Freeze| Freeze| 8x 01 04 75 0p FF| p: Freeze switch 3=OFF, 2=ON
CAM_Preset Freeze Set| Preset Freeze Set| 8x 01 04 76 0p FF| p: Preset Freeze switch 3=OFF, 2=ON
CAM_Preset PT Speed Set| Preset PT Speed Set| 8x 01 7E 01 0B 00 qq FF| qq:Preset PT Speed 02~24 default:15
CAM_Preset Zoom

Speed Set

| Preset Zoom

Speed Set

| 81 01 7E 01 2B 00 qq FF| qq:Preset Zoom Speed 01~07

default:5

CAM_Preset Speed Adj| Preset Speed Adj| 8x 01 7E 01 1B 0p FF| p: Adjustment of direction 3=down, 2=up
CAM_IR address| IR address| 8x 01 06 D8 0p FF| p:IR address 1~4
CAM_Gamma| Gamma set| 8x 01 04 5B 0p FF| P:Gamma NO. (0~4)
CAM_2D

Noise Reduction

| Direct| 8x 01 04 A5 0p FF| (0~0x01)
CAM_3D

Noise Reduction

| ****

Direct

| ****

8x 01 04 53 0p FF

| ****

(0~0x05)

FLICK

| 50HZ| 8x 01 04 23 01 FF|
60HZ| 8x 01 04 23 02 FF|
OFF| 8x 01 04 23 00 FF|
Command type| function| command|
---|---|---|---

Video System Set(Factory)

|  | ****

8x 01 06 35 00 pp FF

| pp: Video format 1080P60         0x00

1080P50         0x01

1080I60          0x02

1080I50          0x03

1080P30         0x04

1080P25         0x05

720P60           0x06

720P50           0x07

720P30           0x08

720P25           0x09

1080P59.94      0x0E

1080I59.94       0x0F

1080P29.97      0x10

720P59.94       0x13

720P29.97       0x14

1080P24         0x11

1080P23.98      0x12

Video System Set(Sony)

|  | ****

8x 01 04 24 72 0p 0q FF

| pq: Video format 1080P60         0x2e

1080P50         0x2f

1080I60          0x01

1080I50          0x04

1080P30         0x06

1080P25         0x08

720P60           0x09

720P50           0x0c

720P30           0x0e

720P25           0x11

1080P59.94      0x13

1080I59.94       0x02

1080P29.97      0x07

720P59.94       0x0a

720P29.97       0x0f

1080P24         0x2a

1080P23.98      0x2b

CAM_ID Write|  | 8x 01 04 22 0p 0q 0r 0s FF| pqrs: Camera ID (=0000 to FFFF)

SYS_Menu

| Menu On| 8x 01 06 06 02 FF| Turn on the menu
Menu Off| 8x 01 06 06 03 FF| Turn off the menu
Menu Back| 8x 01 06 06 10 FF| Menu step back
Menu OK| 8x 01 7E 01 02 00 01 FF| Menu ok

IR_Receive

| On| 8x 01 06 08 02 FF| IR(remote commander)receive ON/OFF
Off| 8x 01 06 08 03 FF
On/Off| 8x 01 06 08 10 FF

Pan_tilt Drive

| Up| 8x 01 06 01 VV WW 03 01 FF| ****

VV: Pan speed 0x01 (low speed) to 0x18 (high speed) WW: Tilt speed 0x01 (low speed) to 0x14 (high speed) YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD)

Down| 8x 01 06 01 VV WW 03 02 FF
Left| 8x 01 06 01 VV WW 01 03 FF
Right| 8x 01 06 01 VV WW 02 03 FF
Up left| 8x 01 06 01 VV WW 01 01 FF
Command type| function| command|
---|---|---|---
 | Up right| 8x 01 06 01 VV WW 02 01 FF|
Down Left| 8x 01 06 01 VV WW 01 02 FF
Down Right| 8x 01 06 01 VV WW 02 02 FF
Stop| 8x 01 06 01 VV WW 03 03 FF
Absolute Position| 8x 01 06 02 VV WW 0Y 0Y

0Y 0Y 0Z 0Z 0Z 0Z FF

Relative Position| 8x 01 06 03 VV WW 0Y 0Y

0Y 0Y 0Z 0Z 0Z 0Z FF

Home| 8x 01 06 04 FF
Reset| 8x 01 06 05 FF

Pan-tilt Limit Set

| Set| 8x 01 06 07 00 0W

0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

| W: 1: Up Right 0: Down Left

YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit

Clear| 8x 01 06 07 01 0W

07 0F 0F 0F 07 0F 0F 0F FF

Part3 Camera Inquiry Command

CAM_DZoom Mode

Inq

| 8x 09 04 36 FF| y0 50 0p FF| p: 0:combination mode

1:separate mode

CAM_DZoom Posi Inq| 8x 09 04 46 FF| y0 50 0p 0q 0r 0s FF| pqrs: Zoom Position
CAM_Speed By Zoom Inq| 8x 09 06 A0 FF| y0 50 0p FF| p: 2: ON 3: OFF
CAM_PT Speed

Inq(IR)

| 8x 09 04 C1 FF| y0 50 pp FF| pp: 0x05~0x18
CAM_Zoom Speed Inq(IR)| 8x 09 04 D1 FF| y0 50 0p FF| p:0x00~0x07
CAM_Focus Mode Inq| 8x 09 04 38 FF| y0 50 02 FF| Auto Focus
y0 50 03 FF| Manual Focus
CAM_Focus Pos Inq| 8x 09 04 48 FF| y0 50 0p 0q 0r 0s FF| pqrs: Focus Position
CAM_2D_Inq| 8x 09 04 A5 FF| y0 50 03 FF| (0~0x01)

p: 0: off  1: on

CAM_3D_Inq

| ****

8x 09 04 53 FF

| ****

y0 50 03 FF

| (0~0x05)

p:0:off     1: auto 2~5: noise level

CAM_WB Mode Inq

| ****

8x 09 04 35 FF

| y0 50 00 FF| Auto
y0 50 01 FF| Indoor mode
y0 50 02 FF| Outdoor mode
y0 50 03 FF| OnePush mode
y0 50 04 FF| ATW
y0 50 05 FF| Manual
CAM_RGain Inq| 8x 09 04 43 FF| y0 50 00 00 0p 0q FF| pq: R Gain
CAM_BGain Inq| 8x 09 04 44 FF| y0 50 00 00 0p 0q FF| pq: B Gain
CAM_Saturation Inq| 8x 09 04 A1 FF| y0 50 00 00 0p 0q FF| pq: saturation
CAM_Contrast Inq| 8x 09 04 A2 FF| y0 50 00 00 0p 0q FF| pq: contrast
Command type| command| return| note
---|---|---|---

CAM_AE Mode Inq

| ****

8x 09 04 39 FF

| y0 50 00 FF| Full Auto
y0 50 03 FF| Manual
y0 50 0A FF| Shutter priority
y0 50 0B FF| Iris priority
y0 50 0D FF| Bright
CAM_Flicker Mode Inq| ****

8x 09 04 AA FF

| ****

y0 50 0p FF

| p: 0: OFF

1: 50HZ

2: 60HZ

CAM_Shutter Pos Inq| 8x 09 04 4A FF| y0 50 00 00 0p 0q FF| pq: Shutter Position
CAM_Iris Pos Inq| 8x 09 04 4B FF| y0 50 00 00 0p 0q FF| pq: Iris Position
CAMGain Posi Inq| 8x 09 04 4C FF| y0 50 00 00 0p 0q FF| pq: Gain Position
CAM Bright Posi Inq| 8x 09 04 4D FF| y0 50 00 00 0p 0q FF| pq: Bright Position
CAM_WDR Mode Inq| 8x 09 04 3D FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_WDR Pos Inq| 8x 09 04 D3 FF| y0 50 0p FF| p: WDR Position
CAM_Aperture Inq| 8x 09 04 42 FF| y0 50 00 00 0p 0q FF| pq: Aperture Gain

CAM_Preset Exist Inq

| 8x 09 04 3F pp FF| ****

y0 50 0q FF

| pp: Memory number q: 1=preset exist

0=preset not saved

SYS_Menu Mode Inq| 8x 09 06 06 FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_LR_Reverse Inq| 8x 09 04 61 FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_Picture Flip Inq| 8x 09 04 66 FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_ID Inq| 8x 09 04 22 FF| y0 50 0p 0q 0r 0s FF| pqrs: Camera ID
CAM_DHCP Inq| 8x 09 04 AE FF| y0 50 pp FF|
CAM_IP Inq| 8x 09 04 AB FF| y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF|
CAM_MASK Inq| 8x 09 04 AC FF| y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF|
CAM_GATEWAY Inq| 8x 09 04 AD FF| y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF|
CAM_Flare Mode Inq| 8x 09 04 B6 FF| y0 50 pp FF|
CAM_Flare Bright| 8x 09 04 B7 FF| y0 50 pp FF|
CAM_Flare Red| 8x 09 04 B8 FF| y0 50 pp FF|
CAM_Flare Green| 8x 09 04 B9 FF| y0 50 pp FF|
CAM_Flare Blue| 8x 09 04 BA FF| y0 50 pp FF|
CAM_Version Inq| 8x 09 00 02 FF| y0 50 ab cd

mn pq rs tu vw FF

|
Video System Inq(Factory)| 8x 09 06 23 FF| y0 50 pp FF| pp: Video format
Video System

Inq(Sony)

| 8x 09 04 24 72

FF

| y0 50 0p 0p FF| pp: Video format
IR_Transfer| 8x 09 06 1A FF| y0 50 02 FF| On
y0 50 03 FF| Off
IR_Receive| 8x 09 06 08 FF| y0 50 02 FF| On
y0 50 03 FF| Off
Pan-tilt Max Speed Inq| 8x 09 06 11 FF| y0 50 ww zz FF| ww: Pan Max Speed zz: Tilt Max Speed
Pan-tilt Pos Inq| 8x 09 06 12 FF| y0 50 0w 0w 0w 0w

0z 0z 0z 0z FF

| wwww: Pan Position zzzz: Tilt

Position

VISCA PAN TILT ABSOLUTE POSITION VALUE

PAN ANGLE| VISCA value| TILT ANGLE| VISCA value
---|---|---|---
-170| 0xF670| -30| 0xFE50
-135| 0xF868| 0| 0x0000
-90| 0xFAF0| 30| 0x01B0
-45| 0xFD78| 60| 0x0360
0| 0x0000| 90| 0x510
45| 0x0288|  |
90| 0x0510|  |
135| 0x0798|  |
170| 0x0990|  |

VISCA PAN TILT SPEED VALUE

PELCO-D PROTOCOL

Function| Byte1| Byte2| Byte3| Byte4| Byte5| Byte6| Byte7
---|---|---|---|---|---|---|---
Up| 0xFF| Address| 0x00| 0x08| Pan Speed| Tilt Speed| SUM
Down| 0xFF| Address| 0x00| 0x10| Pan Speed| Tilt Speed| SUM
Left| 0xFF| Address| 0x00| 0x04| Pan Speed| Tilt Speed| SUM
Right| 0xFF| Address| 0x00| 0x02| Pan Speed| Tilt Speed| SUM
Up left| 0xFF| Address| 0x00| 0x0C| Pan Speed| Tilt Speed| SUM
Up right| 0xFF| Address| 0x00| 0x0A| Pan Speed| Tilt Speed| SUM
Down Left| 0xFF| Address| 0x00| 0x14| Pan Speed| Tilt Speed| SUM
Down Right| 0xFF| Address| 0x00| 0x12| Pan Speed| Tilt Speed| SUM
Zoom In| 0xFF| Address| 0x00| 0x20| 0x00| 0x00| SUM
Zoom Out| 0xFF| Address| 0x00| 0x40| 0x00| 0x00| SUM
Focus Far| 0xFF| Address| 0x00| 0x80| 0x00| 0x00| SUM
Focus Near| 0xFF| Address| 0x01| 0x00| 0x00| 0x00| SUM
Set Preset| 0xFF| Address| 0x00| 0x03| 0x00| Preset ID| SUM
Stop| 0xFF| Address| 0x00| 0x00| Pan Speed| Tilt Speed| SUM
Clear Preset| 0Xff| Address| 0x00| 0x05| 0x00| Preset ID| SUM
Call Preset| 0Xff| Address| 0x00| 0x07| 0x00| Preset ID| SUM
Query Pan Position| 0Xff| Address| 0x00| 0x51| 0x00| 0x00| SUM
Query Pan Position Response| ****

0Xff

| ****

Address

| ****

0x00

| ****

0x59

| Value High Byte| Value Low Byte| ****

SUM

Query Tilt Position| 0Xff| Address| 0x00| 0x53| 0x00| 0x00| SUM
Query Tilt Position Response| ****

0Xff

| ****

Address

| ****

0x00

| ****

0x5B

| Value High Byte| Value Low Byte| ****

SUM

Query Zoom Position| ****

0Xff

| ****

Address

| ****

0x00

| ****

0x55

| ****

0x00

| ****

0x00

| ****

SUM

Query Zoom Position Response| ****

0Xff

| ****

Address

| ****

0x00

| ****

0x5D

| ****

Value High Byte

| ****

Value Low Byte

| ****

SUM

PELCO-P PROTOCOL

Function| Byte1| Byte2| Byte3| Byte4| Byte5| Byte6| Byte7| Byte8
---|---|---|---|---|---|---|---|---
Up| 0Xa0| Address| 0x00| 0x08| Pan Speed| Tilt Speed| 0Xaf| XOR
Down| 0Xa0| Address| 0x00| 0x10| Pan Speed| Tilt Speed| 0Xaf| XOR
Left| 0Xa0| Address| 0x00| 0x04| Pan Speed| Tilt Speed| 0Xaf| XOR
Right| 0Xa0| Address| 0x00| 0x02| Pan Speed| Tilt Speed| 0Xaf| XOR
Up left| 0Xa0| Address| 0x00| 0x0C| Pan Speed| Tilt Speed| 0Xaf| XOR
Up right| 0Xa0| Address| 0x00| 0x0A| Pan Speed| Tilt Speed| 0Xaf| XOR
Down Left| 0Xa0| Address| 0x00| 0x14| Pan Speed| Tilt Speed| 0Xaf| XOR
Down Right| 0Xa0| Address| 0x00| 0x12| Pan Speed| Tilt Speed| 0Xaf| XOR
Zoom In| 0Xa0| Address| 0x00| 0x20| 0x00| 0x00| 0Xaf| XOR
Zoom Out| 0Xa0| Address| 0x00| 0x40| 0x00| 0x00| 0Xaf| XOR
Focus Far| 0Xa0| Address| 0x00| 0x80| 0x00| 0x00| 0Xaf| XOR
Focus Near| 0Xa0| Address| 0x01| 0x00| 0x00| 0x00| 0Xaf| XOR
Stop| 0Xa0| Address| 0x00| 0x00| Pan Speed| Tilt Speed| 0Xaf| XOR
Set Preset| 0xA0| Address| 0x00| 0x03| 0x00| Preset ID| 0xAF| XOR
Clear Preset| 0xA0| Address| 0x00| 0x05| 0x00| Preset ID| 0xAF| XOR
Call Preset| 0xA0| Address| 0x00| 0x07| 0x00| Preset ID| 0xAF| XOR
Query Pan Position| 0xA0| Address| 0x00| 0x51| 0x00| 0x00| 0xAF| XOR
Query Pan Position Response| ****

0xA0

| ****

Address

| ****

0x00

| ****

0x59

| Value High Byte| Value Low Byte| ****

0xAF

| ****

XOR

Query Tilt Position| 0xA0| Address| 0x00| 0x53| 0x00| 0x00| 0xAF| XOR
Query Tilt Position Response| ****

0xA0

| ****

Address

| ****

0x00

| ****

0x5B

| Value High Byte| Value Low Byte| ****

0xAF

| ****

XOR

Query Zoom Position| ****

0xA0

| ****

Address

| ****

0x00

| ****

0x55

| ****

0x00

| ****

0x00

| ****

0xAF

| ****

XOR

Query Zoom Position Response| ****

0xA0

| ****

Address

| ****

0x00

| ****

0x5D

| ****

Value High Byte

| ****

Value Low Byte

| ****

0xAF

| ****

XOR

OSD MENU

1. Under working mode, press the MENU key on the IR remote controller, to enter the OSD menu as bellow:
2. After entering the main menu, use the navigate UP/DOWN key to select the main menu. Once selected, the main menu will change to blue background, and the right side will show sub-menu options.
3. Press the navigate RIGHT key to enter the sub-menu; use the UP/DONW key to select the sub-menu; use the LEFT/RIGHT key to select parameter.
4. Press the MENU key again to return to the previous menu. Press the MENU key continuously to exit the OSD menu.
5. OSD Menu Setting List

SYSTEM

| PROTOCOL| Optional: VISCA, PLC.P, PLC.D| Default: VISCA
---|---|---|---
ADDRESS| VISCA:: 1~7 PLC-P/D: 0~255| Default: 1
BAUDRATE| Optional: 2400, 4800, 9600, 115200| Default: 9600
PROTOCOL LOCK| Optional: OFF, ON| Default: OFF
RS485| Optional: OFF, ON| Default: ON

VISCA PATH

|

Optional: OVER ALL, OVER IP, OVER COM

|

Default: OVER ALL

LANGUAGE| Optional: CHINESE, ENGLISH, RUSSIAN| Default: ENGLISH

EXPOSURE

| EXPOSURE MODE| AUTO, MANUAL, SHUTTER, IRIS, BRIGHT| Default: AUTO
---|---|---|---
SHUTTER| Shutter speed: 1/30~1/10000, only valid under MANUAL and SHUTTER mode| Default: AUTO
 | IRIS| Iris setting: CLOSE~F1.8, only valid under MANUAL and IRIS mode| Default: AUTO
---|---|---|---
GAIN| Gain setting: 0dB~30dB, only valid under MANUAL mode| Default: AUTO
EXPOSURE BRIGHT| Bright setting: 0~27, only valid under BRIGHT priority mode.| Default: AUTO
BRIGHT| 0~15| Default: 8
WIDE DYNAMIC MODE|

Optional: OFF, ON

|

Default: OFF

WIDE DYNAMIC LEVEL|

1~6

|

Default: 1

BLC| OFF/ON| Default: OFF

IMAGE

| WHITE BALANCE MODE| Optional: ATW, MANUAL, AUTO, INDOOR, OUTDOOR, PUSH, C.T.|

Default: ATW

---|---|---|---
RED GAIN| Red gain level: 0~255, only valid under manual white balance mode| Default: AUTO
BLUE GAIN| Blue gain level:0~255 , only valid under manual white balance mode| Default: AUTO
COLOR TEMPERATURE| Set the color temperature value: 2500~10000 only valid under C.T. mode.| Default: AUTO
FLICKER| Anti-Flicker setting:50/60HZ/OFF, to reduce the video flicker| Default: 50HZ
DIGITAL ZOOM| Optional: OFF, ON| Default: OFF
FOCUS MODE| AUTO, MANUAL| Default: AUTO

QUALITY

| 2D NOISE REDUCTION| 2D noise reduction: the bigger value is, the less noise on image is, the lower resolution is| Default: OFF
---|---|---|---
3D NOISE REDUCTION| 3D noise reduction: OFF/AUTO/0~4, the bigger value is, the less motion noise on image is. High value will cause image smear.|

Default: AUTO

SHARPNESS| Sharpness setting: 0~15, the higher value is, edge of the image will be sharpen| Default: 6
CONTRAST| Set contrast level: 0~15| Default: 8
SATURATION| Set saturation level: 0~15| Default: 8
GAMMA| Select gamma level: 0~15| Default: 8
IMAGE STYLE| Optional: USER, NORMAL, COLORFULL| Default: USER

PTZ SETTINGS

| SPEED BY ZOOM| Optional: OFF, ON| Default: ON
---|---|---|---
FLIP HORIZONTAL| Flip horizontal| Default: OFF
FLIP VERTICAL| Flip vertical| Default: OFF
PT SPEED| Set Pan Tilt speed: 5~24| Default: 18
ZOOM SPEED| Set Zoom speed: 1~7| Default: 5
PRESET FREEZE| Optional: OFF, ON| Default: OFF
PRESET PT SPEED| Preset head speed: 2~24| Default: 15
PRESET ZOOM SPEED| Preset zoom speed: 1~7| Default: 5
PRESET SAVE AE&AW| Optional: OFF, ON| Default: OFF
VIDEO FORMAT| SIZE| 1080P, 1080I, 720P
---|---|---
FRAME RARE| 60, 59.94, 50, 30, 29.97, 25, 24, 23.98

RESET

| SYSTEM RESET| Reset communication parameter to default
---|---|---
CAMERA RESET| Reset image parameter to default
PAN TILI RESET| Reset pan/tilt parameter to default
ALL RESET| Reset all parameter to default

INFO RMATIONS

| IR ADDRESS| Camera IR control address
---|---|---
CLIENT| VISCA
MODEL NO.| Model number
ARM VERSION| ARM firmware version
ISP VERSION| Camera ISP firmware version
RELEASE DATE| Software release date

UVC CONTROL

1. Only run the client software after the camera has completed self-configuration (the IR indicator in blue color and will not flash); otherwise may cause black video issue.
2. Make sure the camera is recognized by the PC Device Manager.
3. Make sure the interval of video format switching more than 1 second, otherwise black video maybe caused.
4. Make sure the interval of control command sending from the server (via USB) to the camera no less than 250ms.
5. Support standard UVC interface.

0Z 0Z 0Z 0Z FF

CT_PANTILT_RELATIVE_CONTROL| 8x 01 06 01 pp qq rr ss FF
CT_ZOOM_RELATIVE_CONTROL| 8x 01 04 07 pp FF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>