Telycam MEET Plus 10 HDMI Plus USB Type C HD PTZ Camera User Manual
- June 13, 2024
- Telycam
Table of Contents
- Telycam MEET Plus 10 HDMI Plus USB Type C HD PTZ Camera
- Product Information
- Product Usage Instructions
- FAQs
- SAFETY GUIDES
- USE CHECK
- PRODUCT HIGHLIGHTS
- CAMERA SPEC
- INTERFACE DESCRIPTION
- CAMERA DIMENSION
- IR REMOTE CONTROLLER
- VISCA PROTOCOL
- OSD MENU
- UVC CONTROL
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Telycam MEET Plus 10 HDMI Plus USB Type C HD PTZ Camera
Product Information
- Specifications
- Sensor: 10X HD PTZ Camera 1/2.8inch high quality, 2.4 MP CMOS Sensor
- Video Format: HDMI: 19201080P60/59.94/50/30/29.97/25/24, 19201080I60/59.94/50, 1280720P60/59.94/50/30/29.97/25; USB Type-C: 1280720P60, 1024768P60, 800600P60, 640480P30, 320240P60
- Video Interface: HDMI, USB Type-C
- Focal Length: 4.7mm~47mm
- Aperture: F1.6~3.0
- Zoom: 10x optical zoom +12x digital zoom
- Rotation Angle: Supported
- Rotation Speed: Supported
- Preset Control: Supported
- Port Protocol: Visca Serial, Pelco-P, Pelco-D
- Minimum Lux: 0.7lux
- White Balance: Auto / Manual / ATW / Push / Indoor / Outdoor / Color Temperature
- Exposure: Auto / Manual / Shutter / Iris / Bright
- Focus: Auto / Manual
- Iris: Auto / Manual
- Shutter: Supported
- Gamma select: Supported
- WDR: Supported
- BLC: Supported
Product Usage Instructions
- Safety Guides
- Before operating the camera, ensure to read and follow all instructions in the manual provided. Keep the manual with the camera for safety purposes.
- The camera operates on a power voltage of 12V DC with a rated currency of 2A. Always use the original power supply adapter from the factory.
- Use Check-Dial Switch Setting
- Check the dial switch setting at the bottom of the camera according to the provided instructions.
- Product Highlights
- The MEET+ 10 is a 10X HDMI+USB Type C HD PTZ Camera designed for high-definition video capture and streaming.
- Cleaning Instructions
- Use a dry and soft cloth to clean the camera housing. Apply a neutral cleaning agent if necessary. Avoid using strong or abrasive cleaning agents that can damage the camera lens.
FAQs
- Q: What should I do if the video quality is affected by electromagnetic fields?
- A: If the video quality is affected, try adjusting the camera position or relocating it to minimize interference from electromagnetic fields.
SAFETY GUIDES
- Before operation, please fully read and follow all instructions in the manual. For your safety, always keep this manual with the camera.
- The camera power voltage is 12V DC, and the rated currency is 2A. We suggest you use it with the original power supply adapter supplied by the factory.
- Please keep the power cable, video cable and control cable in a safe place. Protect all cables, especially the connectors.
- Operational environment: -10℃~50℃, humidity less than 80%.
- To avoid any danger, please keep the camera away from the corrosive liquid.
- Avoid stress, vibration and dampness during transportation, storage and installation.
- Do not remove the camera housing and cover. For any service, please contact authorized technicians.
- Video cable and control cable should be individually shielded, and cannot be substituted with other cables. Do not direct the camera lens towards strong light, such as the sun or the intense light.
- Use a dry and soft cloth to clean the camera housing. Applied with a neutral cleaning agent when there is a need to clean. To avoid damage on the camera lens, never use strong or abrasive cleaning agents on the camera housing.
- Do not move the camera by holding the camera head. To avoid mechanical trouble, do not rotate the camera head by hand.
- Put the camera on fixed and smooth desk or platform, to avoid lean installation.
- Power Supply Polarity:
Attention!
- The video quality may be affected by the specific frequencies of the electromagnetic field.
- Never grasp the head of the camera, and never move the camera by hand when it is working, otherwise, the mechanism may be destroyed.
Declaration:
- The instructional Manual is for reference only. Please refer to the actual product.
- Please contact Customer Service staff for the latest programs and supplementary documentation.
- In case of any doubt or dispute in the instruction manual, the final interpretation of the company shall prevail.
USE CHECK
PACKING LIST
Check all the below items when opening the package
- Camera ················································ 1PCS
- Power Adapter ········································ 1PCS
- Power Cable ··········································· 1PCS
- Remote Controller ···································· 1PCS
- USB Type-C Cable ··································· 1PCS
- RS232 Cable ·········································· 1PCS
- User Manual ··········································· 1PCS
- QC PASS ··············································· 1PCS
QUICK START
Dial Switch Setting (at the bottom of the camera)
- Dial Switch (ARM)
SW-1 | SW-2 | Instruction | |
---|---|---|---|
1 | OFF | OFF | Upgrading mode |
2 | ON | OFF | Debugging mode |
3 | OFF | ON | Undefined |
4 | ON | ON | Working mode |
Dial Switch
| SW-3| SW-4| Instruction
1| OFF| OFF| Reserved
2| ON| OFF| Reserved
3| OFF| ON| Reserved
4| ON| ON| Reserved
Dial Switch
| SW-5| SW-6| Instruction
1| OFF| OFF| Reserved
2| ON| OFF| Reserved
3| OFF| ON| Reserved
4| ON| ON| Reserved
PRODUCT HIGHLIGHTS
- With the most advanced HD DSP, 1/2.8-inch 2.4 million image sensor.
- High-quality 10x 62.5-degree wide-angle optical lens, to ensure smooth and transparent HD images.
- Independent intellectual property rights of the focus algorithm, fast and accurate focus performance, to ensure that the image remains clear in the process of zooming, focusing process is fast and smooth.
- USB and HDMI output simultaneously.
- HDMI maximum resolution supports 1920*1080P60 output, suitable for a variety of occasions.
- USB Type-C multiple compression output, the maximum resolution support MJPG1920*1080P60, suitable for different video software applications.
- USB Type-C support Windows, MAC OS, Android, Linux and other operating systems.
- Using the standard UVC protocol, compatible with most video conferencing software.
- Support image flip function: can be front-mounted, inverted, to meet the requirements of different occasions video framing.
- High-precision motor positioning, quiet and smooth mechanical rotation.
- Support 128 preset bits.
- Support RS232/485 serial port control.
- Standard Sony Visca and Pelco-P/D control protocol.
- Support WDR wide dynamic, 3D noise reduction function.
- Brightness, contrast, hue, saturation, sharpness, gamma, exposure, white balance, gain and other parameters can be adjusted.
- Support user’s program upgrade.
- Support USB Type-C interface power supply.
- Comes with a multi-functional infrared remote control, easy and fast for users to use.
- Multi-language menu: support Chinese, English, and Russian.
CAMERA SPEC
10X HD PTZ Camera
Sensor| 1/2.8inch high quality, 2.4 MP CMOS Sensor
|
HDMI
| 1920*1080P60/59.94/50/30/29.97/25/24
1920*1080I60/59.94/50
Video Format| | 1280720P60/59.94/50/30/29.97/25
| MJPG: 19201080P60; 1280*960P60;
| USB
Type-C
| 1280720P60; 1024768P60; 800*600P60;
640480P30; 320240P60
| | YUY2:640480P30;320240P30
Video Interface| HDMI, USB Type-C
Focal Length| 4.7mm~47mm
Aperture| F1.6~3.0
View Angel| 62.5°(Wide)~6.43°(Tele)
Lens Magnifications| 10x optical zoom +12x digital zoom
Rotation Angle| Pan: ±170°; Tilt: -30°~+90°;
Rotation Speed| Pan: 0.1°~120°/s; Tilt: 0.1°~80°/s
Preset| Remote controller: 10; RS232: 128; Accuracy: 0.1°
Control Port| RS232
Protocol| Visca Serial, Pelco-P, Pelco-D
Minimum Lux| 0.7lux
White Balance| Auto / Manual / ATW / Push / Indoor / Outdoor / Color
Temperature
Exposure| Auto / Manual /Shutter / Iris / Bright
Focus| Auto / Manual
Iris| Auto / Manual
Shutter| Auto / Manual
Gamma select| Supported
WDR| Supported
BLC| Supported
2D Noise Reduction| Supported
---|---
3D Noise Reduction| Supported
Anti-flicker| OFF, 50Hz, 60Hz
Pan Tilt Flip| Supported
Mirroring| Supported
Input Voltage| DC 12V / USB 5V
Dimension| 148mm×132mm×162mm
Net Weight| 0.9kg(2LBS)
Working Temperature| -10℃~50℃
Working Humidity| ≤80%
INTERFACE DESCRIPTION
- Camera Lens
- Camera Base
- IR Receiver Panel
- Power Indicator Light
- Dial Switch
- Tripod Screw Hole
- Installation Hole
- Power Indicator
- DC 12V plug
- RS232 port
- HDMI port
- USB Type-C port
CAMERA DIMENSION
IR REMOTE CONTROLLER
LED Function Instruction
- Press any button and show in red colour: The current selection is to control the camera;
- Press any button and shows in green color: The current selection is to control the codec;
- Press any button and show in blue colour: The current selection is to control the TV;
Power button
- Red button: in normal work mode, short press one time, and the camera will enter standby mode; short press again, and the camera will start self-configuration and go to the HOME position; it will go to No.0 preset position if that was set;
- Green button: Codec power button(need to learn the button coding); Blue button: TV power button( need to learn the button coding);
Number buttons
- Set Preset: Long press(3seconds) the number button to save preset; Clear Preset: Clear+number button to clear the relative preset;
- Long press: (3 seconds) the Clear button to clear all presets;
- Run Preset: Short press the number button to run the relative preset.
LEARNING FUNCTION:
- Press the green button, and the LED indicator light will show in green colour for 1 second, which means switch to video terminal/codec control mode;
- Single Button Coding: long press(3seconds) Home +number”1″ button simultaneously, the green indicator LED will light, enter button learning mode, press the buttons which need to be learned, LED will start flickering(1HZ), now can start button learning: get the codec remote point to the camera remote’s infrared tube( about 10cm distance), then press the button which need to be learned, the LED re-flickering when learning finishes; press other buttons which also need to be learned; Press the Home+”0″ buttons simultaneously to exit and save all remote data. If the button learning fails, the camera will enter normal working mode after 15 seconds, LED will extinguish.
- All Button Coding: Long press (3 seconds) Home+number”2″ button simultaneously, and the green indicator LED will start flickering(1HZ), to enter all button learning modes: get codec remote point to the camera remote’s infrared tube( about 10cm distance), to start all button coding mode, the LED will extinguish when learning finished. If the button learning fails, the camera will enter normal working mode after 15 seconds, LED will extinguish.
- All Button Sending Mode: Long press (3 seconds) the Menu + number “3” button simultaneously, the remote will enter all button sending mode.
- Similar operation for the TV control mode learning.
VISCA IN (RS232 PORT)
NO. | Functions |
---|---|
1 | DTR |
2 | DSR |
3 | TXD |
4 | GND |
5 | RXD |
6 | A |
7 | IR OUT |
8 | B |
VISCA IN Mini DIN Connection
Camera VISCA IN | Mini DIN |
---|---|
1 | DTR |
2 | DSR |
3 | TXD |
4 | GND |
5 | RXD |
6 | A(+) |
7 | IR OUT |
8 | B(-) |
VISCA IN DB9 Connection
CameraVISCA IN | Windows DB-9 |
---|---|
1 | DTR |
2 | DSR |
3 | TXD |
4 | GND |
5 | RXD |
6 | A(+) |
7 | IR OUT |
8 | B(-) |
SERIAL PORT CONFIGURATION:
Parameter | Value |
---|---|
Baud rate | 2400/4800/9600/115200 |
Start bit | 1bit |
Date bit | 8bits |
Stop bit | 1bit |
Check bit | None |
VISCA PROTOCOL
Part1 Camera Return Command
Ack/Completion Message
| command| Note
ACK| z0 41 FF| Returned when the command is accepted.
Completion| z0 51 FF| Returned when the command has been executed.
Error Messages
| command| Note
Syntax Error| z0 60 02 FF| Returned when the command format is different or
when a command with illegal command parameters is accepted.
Command Not Executable
| z0 61 41 FF| Returned when a command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus.
Part2 Camera Control Command
Command type| function| command|
---|---|---|---
Address Set| Broadcast| 88 30 01 FF| Address setting
IF_Clear| Broadcast| 88 01 00 01 FF| I/F Clear
Command Cancel| | 8x 21 FF|
CAM_Power| On| 8x 01 04 00 02 FF| Power ON/OFF
Off| 8x 01 04 00 03 FF| Address setting
CAM_Zoom| Stop| 8x 01 04 07 00 FF|
Tele(Standard)| 8x 01 04 07 02 FF
Wide(Standard)| 8x 01 04 07 03 FF
Tele(Variable)| 8x 01 04 07 2p FF| p = 0(low)~7(high)
Wide(Variable)| 8x 01 04 07 3p FF
Direct| 8x 01 04 47 0p 0q 0r 0s FF| pqrs: Zoom Position (0(wide)
~0x4000(tele))
Direct with speed| 8x 0A 04 47 0t 0p 0q 0r 0s FF| t: spd 0~7 pqrs: Zoom
Position (0(wide) ~0x4000(tele))
CAM_DZoom| ON| 8x 01 04 06 02 FF|
OFF| 8x 01 04 06 03 FF
Combine Mode| 8x 01 04 36 00 FF| Combine with optical zoom control
Separate Mode| 8x 01 04 36 01 FF| Separate with optical zoom control
Stop| 8x 01 04 06 00 FF| Enable In separate mode
Tele (Variable)| 8x 01 04 06 2p FF| Enable In separate mode
Wide (Variable)| 8x 01 04 06 3p FF| Enable In separate mode
Direct| 8x 01 04 46 0p 0q 0r 0s FF| Enable In separate mode
CAM_Focus| Stop| 8x 01 04 08 00 FF|
Far(Standard)| 8x 01 04 08 02 FF
Near(Standard)| 8x 01 04 08 03 FF
Far (Variable)| 8x 01 04 08 2p FF| p=0 (Low) to 7 (High)
Near (Variable)| 8x 01 04 08 3p FF| p=0 (Low) to 7 (High)
Command type| function| command|
---|---|---|---
| Direct| 8x 01 04 48 0p 0q 0r 0s FF| pqrs: Focus Position
Auto Focus| 8x 01 04 38 02 FF|
Manual Focus| 8x 01 04 38 03 FF|
One Push AF| 8x 01 04 18 01 FF|
CAM_Zoom Focus
| ****
Direct
| ****
8x 01 04 47 0p 0q 0r 0s 0t 0u 0v 0w FF
| pqrs: Zoom Position (0(wide)~ 0x4000(tele))
tuvw: Focus Position
CAM_WB
| Auto| 8x 01 04 35 00 FF|
Indoor| 8x 01 04 35 01 FF|
Outdoor| 8x 01 04 35 02 FF|
One Push| 8x 01 04 35 03 FF|
ATW| 8x 01 04 35 04 FF|
Manual| 8x 01 04 35 05 FF|
Sodium lamp| 8x 01 04 35 08 FF|
fluorescent| 8x 01 04 35 09 FF|
One Push Trigger| 8x 01 04 10 05 FF|
CAM_R Gain
| Reset| 8x 01 04 03 00 FF| ****
Manual Control of R Gain
Up| 8x 01 04 03 02 FF
Down| 8x 01 04 03 03 FF
Direct| 8x 01 04 43 00 00 0p 0q FF| pq: R Gain (0~0xFF)
CAM_B Gain
| Reset| 8x 01 04 04 00 FF| ****
Manual Control of B Gain
Up| 8x 01 04 04 02 FF
Down| 8x 01 04 04 03 FF
Direct| 8x 01 04 44 00 00 0p 0q FF| pq: B Gain (0-0xFF)
CAM_AE
| Full Auto| 8×01 04 39 00 FF| Automatic Exposure mode
Manual| 8x 01 04 39 03 FF| Manual Control mode
Shutter Priority
| ****
8x 01 04 39 0A FF
| Shutter Priority
Automatic Exposure mode
Iris Priority| 8x 01 04 39 0B FF| Iris Priority Automatic Exposure mode
Bright| 8x 01 04 39 0D FF| Bright Mode (Manual control)
CAM_Shutter
| Reset| 8x 01 04 0A 00 FF| ****
Shutter Setting
Up| 8x 01 04 0A 02 FF
Down| 8x 01 04 0A 03 FF
Direct| 8x 01 04 4A 00 00 0p 0q FF| pq: Shutter Position (0~0x15)
CAM_Iris
| Reset| 8x 01 04 0B 00 FF| ****
Iris Setting(0~0xD)
Up| 8x 01 04 0B 02 FF
Down| 8x 01 04 0B 03 FF
Direct| 8x 01 04 4B 00 00 0p 0q FF| pq: Iris Position (0~ 0x11)
CAM_Gain
| Reset| 8x 01 04 0C 00 FF| ****
Gain Setting (0~0x0F)
Up| 8x 01 04 0C 02 FF
Down| 8x 01 04 0C 03 FF
Direct| 8x 01 04 0C 00 00 0p 0q FF| pq: Gain Positon (0~0x0E)
CAM_Bright
| Reset| 8x 01 04 0D 00 FF| ****
Bright Setting
Up| 8x 01 04 0D 02 FF
Down| 8x 01 04 0D 03 FF
Direct| 8x 01 04 4D 00 00 0p 0q FF| pq: Bright l Positon (0~0x1B)
Command type| function| command|
---|---|---|---
CAM_WDR
| On| 8x 01 04 3D 02 FF| Exposure Compensation ON/OFF
Off| 8x 01 04 3D 03 FF
Direct| 8x 01 04 D3 pq FF| pq: ExpComp Position (0~0x6)
CAM_Back Light(BLC)| On| 8x 01 04 33 02 FF| BackLight On
Off| 8x 01 04 33 03 FF| BackLight Off
CAM_Sharpness
| Reset| 8x 01 04 02 00 FF| ****
Aperture Control
Up| 8x 01 04 02 02 FF
Down| 8x 01 04 02 03 FF
Direct| 8x 01 04 42 00 00 0p 0q FF| pq: Aperture Gain (0~0x0F)
CAM_Memory(preset)
| Reset| 8x 01 04 3F 00 pp FF| ****
pp: Preset Number(=0 to 127) Corresponds to 0 to 9 on the Remote Commander
Set| 8x 01 04 3F 01 pp FF
Recall| 8x 01 04 3F 02 pp FF
CAM_LR_Reverse| On| 8x 01 04 61 02 FF| Image Flip Horizontal ON/OFF
Off| 8x 01 04 61 03 FF
CAM_Picture Flip| On| 8x 01 04 66 02 FF| Image Flip Vertical ON/OFF
Off| 8x 01 04 66 03 FF
CAM_RS485Ctl| On| 8x 01 06 A5 02 FF|
Off| 8x 01 06 A5 03 FF
CAM_Saturation| Saturation| 8x 01 04 A1 00 00 0p 0q FF| pq:saturation level
0x00~0x0f
CAM_Contrast| Contrast| 8x 01 04 A2 00 00 0p 0q FF| pq:Contrast level
0x00~0x0f
CAM_Speed By Zoom| On| 8x 01 06 A0 02 FF|
Off| 8x 01 06 A0 03 FF
CAM_PT Speed| PT Speed| 8x 01 04 C1 00 00 0p 0q FF| pq:PT speed 0x05~0x18
CAM_Zoom Speed| Zoom Speed| 8x 01 04 D1 00 00 0p 0q FF| pq:Zoom speed
0x01~0x07
CAM_Freeze| Freeze| 8x 01 04 75 0p FF| p: Freeze switch 3=OFF, 2=ON
CAM_Preset Freeze Set| Preset Freeze Set| 8x 01 04 76 0p FF| p: Preset Freeze
switch 3=OFF, 2=ON
CAM_Preset PT Speed Set| Preset PT Speed Set| 8x 01 7E 01 0B 00 qq FF|
qq:Preset PT Speed 02~24 default:15
CAM_Preset Zoom Speed Set| Preset Zoom Speed Set| 81 01 7E 01 2B 00 qq FF|
qq:Preset Zoom Speed 01~07 default:5
CAM_Preset Speed Adj| Preset Speed Adj| 8x 01 7E 01 1B 0p FF| p: Adjustment of
direction 3=down, 2=up
CAM_IR address| IR address| 8x 01 06 D8 0p FF| p:IR address 1~4
CAM_Gamma| Gamma set| 8x 01 04 5B 0p FF| P:Gamma NO. (0~4)
CAM_2D
Noise Reduction
| Direct| 8x 01 04 A5 0p FF| (0~0x01)
CAM_3D
Noise Reduction
| ****
Direct
| ****
8x 01 04 53 0p FF
| ****
(0~0x05)
FLICK
| 50HZ| 8x 01 04 23 01 FF|
60HZ| 8x 01 04 23 02 FF|
OFF| 8x 01 04 23 00 FF|
Command type| function| command|
---|---|---|---
Video System Set(Factory)
| | ****
8x 01 06 35 00 pp FF
| ****
pp: Video format 1080P60 0x00
1080P50 0x01
1080I60 0x02
1080I50 0x03
1080P30 0x04
1080P25 0x05
720P60 0x06
720P50 0x07
720P30 0x08
720P25 0x09
1080P59.94 0x0E
1080I59.94 0x0F
1080P29.97 0x10
720P59.94 0x13
720P29.97 0x14
1080P24 0x11
1080P23.98 0x12
Video System Set(Sony)
| | ****
8x 01 04 24 72 0p 0q FF
| ****
pq: Video format 1080P60 0x2e
1080P50 0x2f
1080I60 0x01
1080I50 0x04
1080P30 0x06
1080P25 0x08
720P60 0x09
720P50 0x0c
720P30 0x0e
720P25 0x11
1080P59.94 0x13
1080I59.94 0x02
1080P29.97 0x07
720P59.94 0x0a
720P29.97 0x0f
1080P24 0x2a
1080P23.98 0x2b
CAM_ID Write| | 8x 01 04 22 0p 0q 0r 0s FF| pqrs: Camera ID (=0000 to FFFF)
SYS_Menu
| Menu On| 8x 01 06 06 02 FF| Turn on the menu
Menu Off| 8x 01 06 06 03 FF| Turn off the menu
Menu Back| 8x 01 06 06 10 FF| Menu step back
Menu OK| 8x 01 7E 01 02 00 01 FF| Menu ok
IR_Receive
| On| 8x 01 06 08 02 FF| IR(remote commander)receive ON/OFF
Off| 8x 01 06 08 03 FF
On/Off| 8x 01 06 08 10 FF
Pan_tilt Drive
| Up| 8x 01 06 01 VV WW 03 01 FF| ****
VV: Pan speed 0x01 (low speed) to 0x18 (high speed) WW: Tilt speed 0x01 (low speed) to 0x14 (high speed) YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD)
Down| 8x 01 06 01 VV WW 03 02 FF
Left| 8x 01 06 01 VV WW 01 03 FF
Right| 8x 01 06 01 VV WW 02 03 FF
Up left
| ****
8x 01 06 01 VV WW 01 01 FF
Command type| function| command|
---|---|---|---
| Upright| 8x 01 06 01 VV WW 02 01 FF|
Down Left| 8x 01 06 01 VV WW 01 02 FF
Down Right| 8x 01 06 01 VV WW 02 02 FF
Stop| 8x 01 06 01 VV WW 03 03 FF
Absolute Position
| 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y
0Z 0Z 0Z 0Z FF
Relative Position
| 8x 01 06 03 VV WW 0Y 0Y 0Y 0Y
0Z 0Z 0Z 0Z FF
Home| 8x 01 06 04 FF
Reset| 8x 01 06 05 FF
Pan-tilt Limit Set
| ****
Set
| 8x 01 06 07 00 0W
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
| ****
W: 1: Up Right 0: Down Left
YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit Position(TBD)
Clear
| 8x 01 06 07 01 0W
07 0F 0F 0F 07 0F 0F 0F FF
Part3 Camera Inquiry Command
Command type | command | return | note |
---|---|---|---|
CAM_Power Inq | 8x 09 04 00 FF | y0 50 02 FF | On |
y0 50 03 FF | Off(Standby) | ||
CAM_Zoom Pos Inq | 8x 09 04 47 FF | y0 50 0p 0q 0r 0s FF | pqrs: Zoom Position |
CAM_DZoom On Off Inq | 8x 09 04 06 FF | y0 50 0p FF | p: 2: ON 3: OFF |
CAM_DZoom Mode Inq | 8x 09 04 36 FF | y0 50 0p FF | p: 0:combination mode |
1:separate mode
CAM_DZoom Posi Inq| 8x 09 04 46 FF| y0 50 0p 0q 0r 0s FF| pqrs: Zoom Position
CAM_Speed By Zoom Inq| 8x 09 06 A0 FF| y0 50 0p FF| p: 2: ON 3: OFF
CAM_PT Speed Inq(IR)| 8x 09 04 C1 FF| y0 50 pp FF| pp: 0x05~0x18
CAM_Zoom Speed Inq(IR)| 8x 09 04 D1 FF| y0 50 0p FF| p:0x00~0x07
CAM_Focus Mode Inq| 8x 09 04 38 FF| y0 50 02 FF| Auto Focus
y0 50 03 FF| Manual Focus
CAM_Focus Pos Inq| 8x 09 04 48 FF| y0 50 0p 0q 0r 0s FF| pqrs: Focus Position
CAM_2D_Inq| 8x 09 04 A5 FF| y0 50 03 FF| (0~0x01)
p: 0: off 1: on
CAM_3D_Inq
| ****
8x 09 04 53 FF
| ****
y0 50 03 FF
| (0~0x05)
p:0:off 1: auto 2~5: noise level
CAM_WB Mode Inq
| ****
8x 09 04 35 FF
| y0 50 00 FF| Auto
y0 50 01 FF| Indoor mode
y0 50 02 FF| Outdoor mode
y0 50 03 FF| OnePush mode
y0 50 04 FF| ATW
y0 50 05 FF| Manual
CAM_RGain Inq| 8x 09 04 43 FF| y0 50 00 00 0p 0q FF| pq: R Gain
CAM_BGain Inq| 8x 09 04 44 FF| y0 50 00 00 0p 0q FF| pq: B Gain
CAM_Saturation Inq| 8x 09 04 A1 FF| y0 50 00 00 0p 0q FF| pq: saturation
CAM_Contrast Inq| 8x 09 04 A2 FF| y0 50 00 00 0p 0q FF| pq: contrast
Command type| command| return| note
---|---|---|---
CAM_AE Mode Inq
| ****
8x 09 04 39 FF
| y0 50 00 FF| Full Auto
y0 50 03 FF| Manual
y0 50 0A FF| Shutter priority
y0 50 0B FF| Iris priority
y0 50 0D FF| Bright
CAM_Flicker Mode Inq
| ****
8x 09 04 AA FF
| ****
y0 50 0p FF
| p: 0: OFF
1: 50HZ
2: 60HZ
CAM_Shutter Pos Inq| 8x 09 04 4A FF| y0 50 00 00 0p 0q FF| pq: Shutter
Position
CAM_Iris Pos Inq| 8x 09 04 4B FF| y0 50 00 00 0p 0q FF| pq: Iris Position
CAMGain Posi Inq| 8x 09 04 4C FF| y0 50 00 00 0p 0q FF| pq: Gain Position
CAM Bright Posi Inq| 8x 09 04 4D FF| y0 50 00 00 0p 0q FF| pq: Bright
Position
CAM_WDR Mode Inq| 8x 09 04 3D FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_WDR Pos Inq| 8x 09 04 D3 FF| y0 50 0p FF| p: WDR Position
CAM_Aperture Inq| 8x 09 04 42 FF| y0 50 00 00 0p 0q FF| pq: Aperture Gain
CAM_Preset Exist Inq
| ****
8x 09 04 3F pp FF
| ****
y0 50 0q FF
| pp: Memory number q: 1=preset exist
0=preset not saved
SYS_Menu Mode Inq| 8x 09 06 06 FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_LR_Reverse Inq| 8x 09 04 61 FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_Picture Flip Inq| 8x 09 04 66 FF| y0 50 02 FF| On
y0 50 03 FF| Off
CAM_ID Inq| 8x 09 04 22 FF| y0 50 0p 0q 0r 0s FF| pqrs: Camera ID
CAM_DHCP Inq| 8x 09 04 AE FF| y0 50 pp FF|
CAM_IP Inq| 8x 09 04 AB FF| y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF|
CAM_MASK Inq| 8x 09 04 AC FF| y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF|
CAM_GATEWAY Inq| 8x 09 04 AD FF| y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF|
CAM_Flare Mode Inq| 8x 09 04 B6 FF| y0 50 pp FF|
CAM_Flare Bright Mode| 8x 09 04 B7 FF| y0 50 pp FF|
CAM_Flare Red| 8x 09 04 B8 FF| y0 50 pp FF|
CAM_Flare Green| 8x 09 04 B9 FF| y0 50 pp FF|
CAM_Flare Blue| 8x 09 04 BA FF| y0 50 pp FF|
CAM_Version Inq| 8x 09 00 02 FF| y0 50 ab cd
mn pq rs tu vw FF
|
Video System Inq(Factory)| 8x 09 06 23 FF| y0 50 pp FF| pp: Video format
Video System Inq(Sony)| 8x 09 04 24 72 FF| y0 50 0p 0p FF| pp: Video format
IR_Transfer| 8x 09 06 1A FF| y0 50 02 FF| On
y0 50 03 FF| Off
IR_Receive| 8x 09 06 08 FF| y0 50 02 FF| On
y0 50 03 FF| Off
Pan-tilt Max Speed Inq| 8x 09 06 11 FF| y0 50 ww zz FF| ww: Pan Max Speed zz:
Tilt Max Speed
Pan-tilt Pos Inq| 8x 09 06 12 FF| y0 50 0w 0w 0w 0w 0z 0z 0z 0z FF| we: Pan
Position Z: Tilt Position
VISCA PAN TILT ABSOLUTE POSITION VALUE
PAN ANGLE | VISCA value | TILT ANGLE | VISCA value |
---|---|---|---|
-170 | 0xF670 | -30 | 0xFE50 |
-135 | 0xF868 | 0 | 0x0000 |
-90 | 0xFAF0 | 30 | 0x01B0 |
-45 | 0xFD78 | 60 | 0x0360 |
0 | 0x0000 | 90 | 0x510 |
45 | 0x0288 | ||
90 | 0x0510 | ||
135 | 0x0798 | ||
170 | 0x0990 |
VISCA PAN TILT SPEED VALUE
Pan(Degree/Second) | Tilt(Degree/Second) |
---|---|
0 | 0.3 |
1 | 1 |
2 | 1.5 |
3 | 2.2 |
4 | 2.4 |
5 | 2.6 |
6 | 2.8 |
7 | 3.0 |
8 | 3.2 |
9 | 3.4 |
10 | 3.8 |
11 | 4.5 |
12 | 6 |
13 | 9 |
14 | 15 |
15 | 19 |
16 | 25 |
17 | 32 |
18 | 38 |
19 | 45 |
20 | 58 |
21 | 75 |
22 | 88 |
23 | 105 |
24 | 120 |
Function | Byte1 |
Byte6 | Byte7 |
--- | --- |
Up | 0xFF |
Down | 0xFF |
Left | 0xFF |
Right | 0xFF |
Up left | 0xFF |
Up right | 0xFF |
Down Left | 0xFF |
Down Right | 0xFF |
Zoom In | 0xFF |
Zoom Out | 0xFF |
Focus Far | 0xFF |
Focus Near | 0xFF |
Set Preset | 0xFF |
Stop | 0xFF |
Clear Preset | 0Xff |
Call Preset | 0Xff |
Query Pan Position | 0Xff |
Query Pan Position Response | **** |
0Xff
| ****
Address
| ****
0x00
| ****
0x59
| Value High Byte| Value Low Byte| ****
SUM
Query Tilt Position| 0Xff| Address| 0x00| 0x53| 0x00| 0x00| SUM
Query Tilt
Position Response
| ****
0Xff
| ****
Address
| ****
0x00
| ****
0x5B
| Value High Byte| Value Low Byte| ****
SUM
Query
Zoom Position
| ****
0Xff
| ****
Address
| ****
0x00
| ****
0x55
| ****
0x00
| ****
0x00
| ****
SUM
Query Zoom
Position Response
| ****
0Xff
| ****
Address
| ****
0x00
| ****
0x5D
| ****
Value High Byte
| ****
Value Low Byte
| ****
SUM
Function| Byte1| Byte2| Byte3| Byte4| Byte5|
Byte6| Byte7| Byte8
---|---|---|---|---|---|---|---|---
Up| 0Xa0| Address| 0x00| 0x08| Pan Speed| Tilt Speed| 0Xaf| XOR
Down| 0Xa0| Address| 0x00| 0x10| Pan Speed| Tilt Speed| 0Xaf| XOR
Left| 0Xa0| Address| 0x00| 0x04| Pan Speed| Tilt Speed| 0Xaf| XOR
Right| 0Xa0| Address| 0x00| 0x02| Pan Speed| Tilt Speed| 0Xaf| XOR
Up left| 0Xa0| Address| 0x00| 0x0C| Pan Speed| Tilt Speed| 0Xaf| XOR
Up right| 0Xa0| Address| 0x00| 0x0A| Pan Speed| Tilt Speed| 0Xaf| XOR
Down Left| 0Xa0| Address| 0x00| 0x14| Pan
Speed
| Tilt Speed| 0Xaf| XOR
Down Right| 0Xa0| Address| 0x00| 0x12| Pan Speed| Tilt Speed| 0Xaf| XOR
Zoom In| 0Xa0| Address| 0x00| 0x20| 0x00| 0x00| 0Xaf| XOR
Zoom Out| 0Xa0| Address| 0x00| 0x40| 0x00| 0x00| 0Xaf| XOR
Focus Far| 0Xa0| Address| 0x00| 0x80| 0x00| 0x00| 0Xaf| XOR
Focus Near| 0Xa0| Address| 0x01| 0x00| 0x00| 0x00| 0Xaf| XOR
Stop| 0Xa0| Address| 0x00| 0x00| Pan Speed| Tilt Speed| 0Xaf| XOR
Set Preset| 0xA0| Address| 0x00| 0x03| 0x00| Preset ID| 0xAF| XOR
Clear Preset| 0xA0| Address| 0x00| 0x05| 0x00| Preset ID| 0xAF| XOR
Call Preset| 0xA0| Address| 0x00| 0x07| 0x00| Preset ID| 0xAF| XOR
Query Pan Position| 0xA0| Address| 0x00| 0x51| 0x00| 0x00| 0xAF| XOR
Query Pan Position Response| ****
0xA0
| ****
Address
| ****
0x00
| ****
0x59
| Value High Byte| Value Low Byte| ****
0xAF
| ****
XOR
Query Tilt Position| 0xA0| Address| 0x00| 0x53| 0x00| 0x00| 0xAF| XOR
Query Tilt
Position Response
| ****
0xA0
| ****
Address
| ****
0x00
| ****
0x5B
| Value High Byte| Value Low Byte| ****
0xAF
| ****
XOR
Query
Zoom Position
| ****
0xA0
| ****
Address
| ****
0x00
| ****
0x55
| ****
0x00
| ****
0x00
| ****
0xAF
| ****
XOR
Query Zoom Position Response| ****
0xA0
| ****
Address
| ****
0x00
| ****
0x5D
| ****
Value High Byte
| ****
Value Low Byte
| ****
0xAF
| ****
XOR
OSD MENU
- Under working mode, press the MENU key on the IR remote controller, to enter the OSD menu as below:
- After entering the main menu, use the navigate UP/DOWN key to select the main menu. Once selected, the main menu will change to a blue background, and the right side will show sub-menu options.
- Press the navigate RIGHT key to enter the sub-menu; use the UP/DOWN key to select the sub-menu; use the LEFT/RIGHT key to select the parameter.
- Press the MENU key again to return to the previous menu. Press the MENU key continuously to exit the OSD menu.
- OSD Menu Setting List
SYSTEM
| PROTOCOL| Optional: VISCA, PLC.P, PLC.D| Default: VISCA
---|---|---|---
ADDRESS| VISCA:: 1~7 PLC-P/D: 0~255| Default: 1
BAUDRATE| Optional: 2400, 4800, 9600, 115200| Default: 9600
PROTOCOL LOCK| Optional: OFF, ON| Default: OFF
RS485| Optional: OFF, ON| Default: ON
VISCA PATH
|
Optional: OVER ALL, OVER IP, OVER COM
|
Default: OVER ALL
LANGUAGE| Optional: CHINESE, ENGLISH, RUSSIAN| Default: ENGLISH
EXPOSURE
|
EXPOSURE MODE
|
AUTO, MANUAL, SHUTTER, IRIS, BRIGHT
|
Default: AUTO
---|---|---|---
SHUTTER
| Shutter speed: 1/30~1/10000, only valid under MANUAL and SHUTTER mode|
Default: AUTO
|
IRIS
| Iris setting: CLOSE~F1.8, only valid under MANUAL and IRIS mode|
Default: AUTO
---|---|---|---
GAIN
| Gain setting: 0dB~30dB, only valid under MANUAL mode|
Default: AUTO
EXPOSURE BRIGHT| Bright setting: 0~27, only valid under BRIGHT priority mode.|
Default: AUTO
BRIGHT| 0~15| Default: 8
WIDE DYNAMIC MODE|
Optional: OFF, ON
|
Default: OFF
WIDE DYNAMIC LEVEL|
1~6
|
Default: 1
BLC| OFF/ON| Default: OFF
IMAGE
|
WHITE BALANCE MODE
|
Optional: ATW, MANUAL, AUTO, INDOOR, OUTDOOR, PUSH, C.T.
|
Default: ATW
---|---|---|---
RED GAIN
| Red gain level: 0~255, only valid under manual white balance mode|
Default: AUTO
BLUE GAIN
| Blue gain level:0~255 , only valid under manual white balance mode|
Default: AUTO
COLOR TEMPERATURE| Set the color temperature value: 2500~10000 only valid under C.T. mode.|
Default: AUTO
FLICKER
| Anti-Flicker setting:50/60HZ/OFF, to reduce the video flicker|
Default: 50HZ
DIGITAL ZOOM| Optional: OFF, ON| Default: OFF
FOCUS MODE| AUTO, MANUAL| Default: AUTO
QUALITY
| 2D NOISE REDUCTION| 2D noise reduction: the bigger value is, the less noise on image is, the lower resolution is|
Default: OFF
---|---|---|---
3D NOISE REDUCTION
| 3D noise reduction: OFF/AUTO/0~4, the bigger value is, the less motion noise on image is. High value will cause image smear.|
Default: AUTO
SHARPNESS
| Sharpness setting: 0~15, the higher value is, edge of the image will be sharpen|
Default: 6
CONTRAST| Set contrast level: 0~15| Default: 8
SATURATION| Set saturation level: 0~15| Default: 8
GAMMA| Select gamma level: 0~15| Default: 8
IMAGE STYLE| Optional: USER, NORMAL, COLORFULL| Default: USER
PTZ SETTINGS
| SPEED BY ZOOM| Optional: OFF, ON| Default: ON
---|---|---|---
FLIP HORIZONTAL|
Flip horizontal
|
Default: OFF
FLIP VERTICAL| Flip vertical| Default: OFF
PT SPEED| Set Pan Tilt speed: 5~24| Default: 18
ZOOM SPEED| Set Zoom speed: 1~7| Default: 5
PRESET FREEZE| Optional: OFF, ON| Default: OFF
PRESET PT SPEED|
Preset head speed: 2~24
|
Default: 15
PRESET ZOOM SPEED|
Preset zoom speed: 1~7
|
Default: 5
PRESET SAVE AE&AW|
Optional: OFF, ON
|
Default: OFF
VIDEO FORMAT
| SIZE| 1080P, 1080I, 720P
---|---|---
FRAME RARE| 60, 59.94, 50, 30, 29.97, 25, 24, 23.98
RESET
| SYSTEM RESET| Reset communication parameter to default
---|---|---
CAMERA RESET| Reset image parameter to default
PAN TILI RESET| Reset pan/tilt parameter to default
ALL RESET| Reset all parameters to default
INFO RATIONS
| IR ADDRESS| Camera IR control address
---|---|---
CLIENT| VISCA
MODEL NO.| Model number
ARM VERSION| ARM firmware version
ISP VERSION| Camera ISP firmware version
RELEASE DATE| Software release date
UVC CONTROL
- Only run the client software after the camera has completed self-configuration (the IR indicator in blue colour and will not flash); otherwise may cause black video issue.
- Make sure the camera is recognized by the PC Device Manager.
- Make sure the interval of video format switching is more than 1 second, otherwise black video may be caused.
- Make sure the interval of control command sending from the server (via USB) to the camera no less than 250ms.
- Support standard UVC interface.
UVC properties | VISCA |
---|---|
PU_BACKLIGHT_COMPENSATION_CONTROL | 8x 01 04 33 02 FF |
CY_FX_UVC_PU_BRIGHTNESS_CONTROL | 8x 01 04 A4 00 00 0p 0q FF |
CY_FX_UVC_PU_CONTRAST_CONTROL | 8x 01 04 A2 00 00 0p 0q FF |
CY_FX_UVC_PU_SATURATION_CONTROL | 8x 01 04 A1 00 00 0p 0q FF |
CY_FX_UVC_PU_SHARPNESS_CONTROL | 8x 01 04 42 00 00 0p 0q FF |
CY_FX_UVC_PU_GAMMA_CONTROL | 8x 01 04 5B 0p FF |
CY_FX_UVC_PU_WHITE_BALANCE_TEMPERATUR E_CONTROL | 8x 01 04 35 0p FF |
CY_FX_UVC_PU_BACKLIGHT_COMPENSATION_CO NTROL | 8x 01 04 33 0p FF |
CY_FX_UVC_PU_GAIN_CONTROL | 8x 01 04 49 00 00 0p 0q FF |
CY_FX_UVC_PU_POWER_LINE_FREQUENCY_CON TROL | 8x 01 04 AA 0p FF |
PU_GAIN_CONTROL | 8x 01 04 49 00 00 00 0p FF |
CT_ZOOM_ABSOLUTE_CONTROL | 8x 01 04 47 0p 0q 0r 0s FF |
CT_PANTILT_ABSOLUTE_CONTROL | 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z |
0Z 0Z FF
CT_PANTILT_RELATIVE_CONTROL| 8x 01 06 01 pp qq rr ss FF
CT_ZOOM_RELATIVE_CONTROL| 8x 01 04 07 pp FF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>