Telycam Vision plus N3 NDI HX3 Auto Tracking Live Streaming PTZ Camera User Guide
- August 12, 2024
- Telycam
Table of Contents
Telycam Vision plus N3 NDI HX3 Auto Tracking Live Streaming PTZ Camera
Specifications
- Camera: Vision+ N3 20x
- Part NO.: TLC-300-IP-20(NDl)-AB
- Sensor: 1/2.8 inch, 2.4MP UHD CMOS sensor
- Zoom: 20X optical zoom
- Lens: f= 4.9~98mm, F1.5~F3
- Horizontal View Angle
- Vertical Viewing Angle
- Minimum Working Distance: 1.0m
- S/N Ratio: 50dB
- Camera: Vision+ N3 30x
- Video Format: Various resolutions supported for HDMI, 3G-SDI, and USB Type-C
- Image Parameters: Includes various settings for noise reduction, lux, white balance, exposure, etc.
- IP Streaming: Details about video encoding, bitrate control, network port speed, etc.
- Pan/Tilt Movement: Information about pan/tilt rotation angles and speeds
- I/O Interface: Control port, video port, audio port, etc.
- General: Details about input voltage, operating temperature, net weight, color, etc.
Product Usage Instructions
Vision+ N3 Setup
- Place the Vision+ N3 camera on a stable surface or mount it securely using the appropriate mounting equipment.
- Connect the necessary cables (power supply, network, etc.) to the camera.
Auto Tracking Function The built-in auto-tracking function allows users to effortlessly track targets by following these steps.
- Select the target to track.
- Adjust target size or area if needed.
- The camera will automatically track the target as it moves within the frame.
Zoom and Focus The Vision+ N3 features optical zoom capabilities for capturing details even at a distance.
Follow these steps to adjust zoom and focus:
- Use the zoom control to adjust the level of magnification.
- The proprietary focusing algorithm ensures precise focus even during zoom or movement.
Frequently Asked Questions
Q: How do I update the firmware of Vision+ N3? A: To update the firmware, please visit our official website and download the latest firmware version. Follow the provided instructions for updating the camera’s firmware.
Q: Can I use Vision+ N3 in extreme temperatures? A: The operating temperature range of Vision+ N3 is -10°C to 50°C. Avoid using the camera outside this range to ensure optimal performance.
INTRODUCTION
Lower Latency, Better Image
- Vision+ N3 is the premium NDI®HX3 1080p60 PTZ camera series from Telycam, built-in with the latest NDI®SDK, and equipped with American most advanced image processing solution to deliver high definition and crystal clear image.
- It has a smooth PTZ mechanical design, to make accurate and stable pan, tilt, and zoom movement.
- NDI®HX3, HDMI, SDI, and USB 2.0 output Full HD resolution, ideal for professional live streaming applications.
- With 20X and 30X optical zoom available, the Vision+ N3 can fit seamlessly into any production scenario.
- Line in the audio input, the audio can output with video simultaneously from NDI®HX3, HDMI 2.0, 3G-SDI.
OVERVIEW
NDI®HX3 20X/30X 1080P60 AUTO-TRACKING
Features
1080p60 FHD Resolution
- Equipped with a premium image processing solution and Sony HD CMOS sensor, Vision+ N3 delivers FHD and crystal-clear images even in low-light working environments.
Built-in Auto Tracking function
- With its built-in auto-tracking function, users can track targets, switch targets, set target areas, or adjust target size effortlessly without any third-party software or device.
FreeD
- The Vision+ N3 integrates Free D technology for versatile shooting angles, ideal for both real-world and virtual applications.
20X/30x Optical Zoom
- It features a 20X/30X optical zoom lens with a 60-degree FOV and a proprietary focusing algorithm for precise focus even during zoom or movement, capturing every detail.
NDI®HX3/3G-SDI/HDMI/USB2.0 Available
- In addition to NDI®HX3, it simultaneously outputs images via 3G-SDI, HDMI, and USB 2.0. 3G-SDI and HDMI are for transitional video production, while the USB output can function as a high-end webcam.