SEALEY SSP1.V6 Goggles Direct Vent Instructions

: June 15, 2024
: SEALEY

Table of Contents

SEALEY SSP1.V6 Goggles Direct Vent
Product Usage Instructions
INTRODUCTION
SAFETY
APPLICATIONS
MAINTENANCE
ENVIRONMENT PROTECTION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY SSP1.V6 Goggles Direct Vent

Specifications

Model: SSP1.V6
Brand: Sealey
Material : Polycarbonate lens
Standards: BS EN 166
Notified Body : 2797
Type Examination Certificate Number : CE 691450

Product Usage Instructions

Introduction

The Sealey Safety Goggles – Direct Vent Model SSP1.V6 is designed with direct ventilation for maximum airflow to prevent fogging. The elasticated strap ensures a secure fit, while the soft rim provides comfort for extended periods of use. The impact and scratch-resistant polycarbonate lens offers protection against projectiles.

Safety

Always conduct a risk assessment and follow proper health and safety procedures before using the goggles. Some key safety points to note:

Safety glasses with polycarbonate lenses are impact-resistant but can break under severe impact.
Be cautious of materials that may cause allergic reactions on skin contact.
Replace scratched or damaged lenses promptly.
Avoid using tinted or clear lenses for welding or operations exposing eyes to harmful radiation.

Applications

The Safety Goggles are suitable for various applications requiring eye protection, such as construction, woodworking, or laboratory work.

Maintenance

Cleaning

Proper cleaning is essential for maintaining the goggles:

Avoid abrasive materials for cleaning.
Use warm suds and a soft brush or cloth to clean the lenses.
Regularly disinfect contact areas that may cause allergic reactions.

Storage

Follow these guidelines for storing the goggles:

Store in a bag or case away from direct sunlight, chemicals, and abrasive substances in a clean, dust-free environment.
If possible, use the original bag for transportation.

Obsolescence

Replace the goggles after two years of use or immediately if damaged. The lifespan depends on proper care and maintenance.

FAQ

Q: Can I wear these goggles over my prescription glasses?
- A: No, wearing eye protectors over standard ophthalmic spectacles may create a hazard due to potential impacts.
Q: How often should I replace the scratched lenses?
- A : Scratched or damaged lenses should be replaced promptly to ensure continued protection.
Q: Can I use these goggles for welding?
- A: No, these goggles are not suitable for welding or grinding operations.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT : PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

INTRODUCTION

Direct ventilation allows for maximum airflow to prevent fog. The elasticated strap holds the goggles securely in place. Soft rim provides optimum comfort for long periods of use. BS EN 166 Impact and scratch-resistant durable polycarbonate lens protects against projectiles.

Notified Body: 2797.
Type Examination Certificate Number : CE 691450.
Carried Out By : BSI Group.

SAFETY

Always perform a risk assessment and follow correct health and safety procedures before using this product.

WARNING! Safety glasses with polycarbonate lenses are impact-resistant but may break under severe impact.
WARNING! Materials that may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals.
WARNING! Scratched or damaged oculars should be replaced.
WARNING! Eye protectors against high-speed particles worn over standard ophthalmic spectacles may transmit impacts, thus creating a hazard to the wearer.
DO NOT use tinted or clear lenses when welding or performing other operations that expose your eyes to harmful levels of radiation.
DO NOT use for grinding or welding.
IMPORTANT: if protection against high-speed particles at extremes of temperature is required, then the selected eye-protector should be marked with the letter ‘T’ immediately after the impact letter, i.e. FT, BT or AT. If the impact letter is not followed by the letter ‘T’ then the eye protector shall only be used against high-speed particles at room temperature. If the symbols F, B and A are not common to both the ocular and the frame then it is the lower level that shall be assigned to the complete eye-protector.

APPLICATIONS

EN 166 CATEGORISATION

Optical Class 1 – suitable for work with high vision requirements for permanent use.

FIELD OF USE

B – High-speed particle, medium energy impact.
3 – Protection against droplets of liquids.

MAINTENANCE

CLEANING

DO NOT use abrasive materials.
Using a soft and clean brush or cloth, use warm suds to wash and clean. Ensure hands are clean (without grease).
Materials that may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals. The contact areas should be disinfected regularly.

STORAGE

Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust-free environment.
Use the original bag for transportation if possible.

OBSOLESCENCE

Like all protective products, the life depends on the type of use, care and maintenance. If damaged, replace the entire article. In every case, the product must be replaced after a period of two years.

SSP1.V6 Issue 2 (1) 27/02/24

This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling center and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.

Important: No Liability is accepted for incorrect use of this product.

Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.

EU

Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland

UK

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR