med-fit 2460 Interferential TENS and EMS Machine User Guide

: July 25, 2024
: med-fit

Table of Contents

med-fit 2460 Interferential TENS and EMS Machine
Product Overview
Charging your device
How to Operate
Treatment Programmes TENS
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

med-fit 2460 Interferential TENS and EMS Machine

Product Overview

No Function description

Treatment Mode
EMS/Russ Work State Symbol
Body Part Symbols
EMS/RUSS Work Time
Pulse Rate and Width
SET Symbol
Intensity Channel 1
Intensity Channel 2
Low Battery Symbol
Pause Symbol
Key Locking Symbol
Programme No or Treatment Time

Product Overview

No Function description

LCD Display
Charging Port
ON/OFF
[M] Button – press the [M] button to select the treatment mode.
[+] Button – press the [+] button to increase the intensity
[-] Button – press the [-] button to decrease the intensity
[P] Button – press the [P] button to select the treatment program
[S] Button – press the [-] button to enter the setting mode
[B] Button – press the [B] button to select the treatment mode
Output socket
Belt clip

Charging your device

Before using your device
When using your device for the first time, it is recommended that you place on charge for approximately 2 hours or until the charging light turns green.

Charging – Yellow light.
Full charge – Green light.
The device cannot be used whilst on charge

How to Operate

Device features

Auto Loc k After 20 seconds the auto-lock feature is activated, this locks the display and intensity level to To prevent accidental adjustments whilst in use to unlock press either of the intensity buttons.
Auto Dim The display has a backlit screen after 20 seconds the backlight stops, to re-activate press any button. This feature saves battery power.
Pause Feature Whilst using your device you can pause the treatment at any time. To pause press the M button once the pause symbol will flash beneath the timer. Press the M button again to start the treatment.

How to Operate
Setting a preset programme (P1/P2)
We recommend using these programs before setting up a manual program to help familiarise yourself with the device

Step 1
Press the [M] button to choose the required treatment mode.
Step 2
Press the [B] button to choose a body part for treatment.
Step 3
Press the [P] button and choose either P1 (Programme 1) or P2 (Programme 2).
Step 4
Connect the patient leads to the top of the device CH1 / CH2 and connect 2 pads to each patient cable in use. Now apply the self-adhesive pads to the treatment area ready for use. Please note you can use just one channel 2 pads in TENS, EMS and Russian Stimulation. The IF mode is always 2 patient leads and 4 self-adhesive pads.
Step 5
You are now ready to go Press the [+] button (buttons) CH1 / CH2 to increase the intensity level as required

Please note:
All preset programs have a preset time of 20 minutes which cannot be adjusted

Setting a manual program

Step 1
TENS Mode: Press the [M] button to choose the required mode (TENS, EMS, RUSS or IF).
Step 2
Press the [B] button to choose a body part for treatment.
Step 3
Press the [P] button and select U1 (this is for manual adjustments).
Step 4
Now press the [S] button, which allows manual adjustments to be made. Press the [P] button to change from adjusting pulse rate to pulse width and treatment time.To adjust each parameter (Pulse Width, Pulse Rate and Time) use the [+] and [-] buttons of either CH1 or CH2.
Step 5
Once you have set the required parameters press the [S] button which locks in your settings and the screen shows U1.
Step 6
You are ready to increase intensity by using the [+] buttons CH1 / CH2. Your pre-set time will also be displayed during your treatment session

Please note:
You can not adjust parameters until the intensity is set at zero.

TENS Manual Adjustment examples
Follow Step 1, Step 2, and Step 3. The screen below will be as shown

Now press the [S] button the body part will flash and the Freq (Hz) will flash

Use the [+] and [-] buttons to adjust the frequency.
Press the [P] button to the next parameter pulse width μs and again adjust to the required setting.
Press the [P] button again the timer clock flashes, adjusting to the required setting.
Now press [S] button and the program is now set.
Increase the intensity to the required level by pressing the [+] and [-] buttons.

Treatment Programmes TENS

Mode| Mode| Prog No Pulse Rate Hz Pluse Width µs Time Type
---|---|---

TENS

|

Neck

| P1| 80-120| 120-100| 20| Modulation
P2| 4| 150-200| 20| Modulation
U1| 35| 200| 20| Continuous

Shoulder

| P1| 80-100| 100| 20| Modulation
P2| 10| 220-260| 20| Modulation
U1| 100| 150| 20| Burst

Back

| P1| 10-60| 200| 20| Modulation
P2| 6-10| 250| 20| Modulation
U1| 100/2| 150/250| 20| Hans

Arm

| P1| 2| 250| 20| Continuous
P2| 100| 150| 20| Burst
U1| 100| 200| 20| Continuous

Hand

| P1| 100| 100| 20| Continuous
P2| 2-10| 200| 20| Modulation
U1| 60-100| 200| 20| Modulation

Leg

| P1| 6-10| 200| 20| Modulation
P2| 80-120| 100-120| 20| Burst
U1| 6-20| 120-100| 20| Modulation

Foot

| P1| 80-120| 100-120| 20| Modulation
P2| 2-10| 200| 20| Modulation
U1| 2-60| 260-160| 20| Modulation

Elbow

| P1| 80-120| 120-100| 20| Modulation
P2| 120| 55| 20| Continuous
U1| 80| 100| 20| Continuous

Knee

| P1| 100| 150| 20| Burst
P2| 120| 100-120| 20| Modulation
U1| 100| 100| 20| Continuous

Ankle

| P1| 100| 150| 20| Burst
P2| 6-50| 250| 20| Modulation
U1| 80| 180| 20| Continuous

TENS: U1 Programs can be adjusted to a frequency of 2Hz – 125Hz, pulse width of 50μs – 380μs, and treatment time of 5min – 90min.

Treatment Programmes EMS

Mode| Mode| Prog No Pulse Rate Hz Pluse Width µs Time Type
---|---|---

EMS

|

Neck

| P1| 30| 200| 20| Synchronous
P2| 40| 200| 20| Synchronous
U1| 50| 200| 20| Synchronous

Shoulder

| P1| 45| 200| 20| Synchronous
P2| 55| 200| 20| Synchronous
U1| 80| 200| 20| Synchronous

Back

| P1| 60| 200| 20| Synchronous
P2| 70| 200| 20| Synchronous
U1| 80| 200| 20| Synchronous

Arm

| P1| 50| 150| 20| Synchronous
P2| 60| 150| 20| Synchronous
U1| 80| 150| 20| Synchronous

Hand

| P1| 20| 150| 20| Synchronous
P2| 30| 150| 20| Synchronous
U1| 40| 150| 20| Synchronous

Leg

| P1| 20| 200| 20| Synchronous
P2| 80| 200| 20| Synchronous
U1| 25| 200| 20| Synchronous

Foot

| P1| 20| 200| 20| Synchronous
P2| 30| 200| 20| Synchronous
U1| 40| 200| 20| Synchronous

EMC: The U1 program allows you to adjust the frequency from 20Hz to 125Hz, the pulse width from 50µs to 380µs, the treatment time from 5 minutes to 90 minutes, the ramp-up time from 1 to 9 seconds, and the relaxation time from 1 to 90 seconds.

Treatment Programmes RUSS

Mode| Mode| Prog No Pulse Rate Hz Pulse Width µs Time Type
---|---|---

RUSS

|

Neck

| P1| 30| 200| 20| Synchronous
P2| 40| 200| 20| Synchronous
U1| 50| 200| 20| Synchronous

Shoulder

| P1| 45| 200| 20| Synchronous
P2| 55| 200| 20| Synchronous
U1| 80| 200| 20| Synchronous

Back

| P1| 60| 200| 20| Synchronous
P2| 70| 200| 20| Synchronous
U1| 80| 200| 20| Synchronous

Arm

| P1| 50| 200| 20| Synchronous
P2| 60| 200| 20| Synchronous
U1| 80| 200| 20| Synchronous

Hand

| P1| 20| 200| 20| Synchronous
P2| 30| 200| 20| Synchronous
U1| 40| 200| 20| Synchronous

Leg

| P1| 20| 200| 20| Synchronous
P2| 80| 200| 20| Synchronous
U1| 25| 200| 20| Synchronous

Foot

| P1| 20| 200| 20| Synchronous
P2| 30| 200| 20| Synchronous
U1| 40| 200| 20| Synchronous

RUSS: In the U1 program, the frequency can be adjusted from 20Hz to 125Hz. The treatment time is adjustable from 5 minutes to 90 minutes. The ramp-up time can be adjusted from 1 to 9 seconds. The contraction time can be adjusted from 1 to 90 seconds, and the ramp-down time can be adjusted from 1 to 9 seconds. Additionally, the relaxation time.to 9 seconds. Additionally, the relaxation time.

Treatment Programmes IF

Mode| Mode| Prog No Pulse Rate Hz Pluse Width µs Time Type
---|---|---

IF

|

Neck

| P1| 1-100| 100| 20| Modulation
P2| 1-100| 50| 20| Modulation
U1| 1-100| 50| 20| Modulation

Shoulder

| P1| 50-150| 100| 20| Modulation
P2| 50-150| 50| 20| Modulation
U1| 50-150| 50| 20| Modulation

Back

| P1| 1-50| 100| 20| Modulation
P2| 1-50| 50| 20| Modulation
U1| 1-50| 50| 20| Modulation

Arm

| P1| 1-20| 100| 20| Modulation
P2| 1-20| 50| 20| Modulation
U1| 1-20| 50| 20| Modulation