British Audio PULSE10-V0- 10 Inch 1050 Watts Max Subwoofer User Manual
- June 4, 2024
- British Audio
Table of Contents
User Manual
PULSE10-V0
PULSE12-V0
Owners Manual
Congratulations on purchasing your VIBE subwoofer. Please read this manual in
order to fully understand how to get the best results from this product and
ensure that all
advice on how to look after the product is followed.
Thank you for buying VIBE, we hope you enjoy listening to your product as much
as we enjoyed creating it.
Caution
Do not expose this product to damp or moisture – doing so may result in damage
to the product.
Before wiring, disconnect the cable from the positive battery terminal –
failure to do so may result in electric shock or injury.
Ensure good and correct connections – failure to make the correct connections
may result in fire or damage to the product.
Do not use any functions of this equipment that may take your concentration
away from driving your vehicle – do not set up your amplifier whilst driving,
doing so may result in an accident.
For prolonged setting up, make sure that your vehicle is stationary and in a
safe location.
Keep the volume at a level so you can still hear outside noise – failure to do
this may result in an accident.
VIBE equipment is capable of producing sound levels that can permanently
damage your hearing.
VIBE recommends caution when listening at high volume.
For safe and enjoyable listening, the sound should be comfortable and clear
without distortion.
Limited Warranty
All VIBE products carry a full 12-month warranty, valid from the date of the
original receipt and proof of purchase (UK only). The online warranty card
should be completed within seven days of the original purchase date. The
original receipt and packaging should be retained for this twelve-month
period. If the product develops a problem at any stage during the warranty
period, it should be returned to the point of purchase in its original
packaging, and complete with no items missing. A full description of VIBE’s
warranty information can be found on our website:
www.vibeaudio.co.uk
What Is Not Covered
- Damage to the product due to improper installation.
- Subsequent damage to other components.
- Damage caused by exposure to moisture, excessive heat, chemical cleaners and / or UV radiation.
- Damage through negligence, misuse, accident or abuse. Repeated returns for the same fault may be considered abuse.
- Any cost or expense related to the removal and/or re-installation of the product.
- Damage caused by amplifier clipping or distortion.
- Items repaired or modified by any unauthorized repair facility.
- Return shipping on non-defective items.
- Products returned without a returns authorization number.
- Damage to the product due to use of sealant.
International Warranty
Contact your international VIBE dealer or distributor concerning specific
procedures for your country’s warranty policies.
www.vibeaudio.co.uk
Warning
VIBE equipment is capable of sound pressure levels that can cause permanent
damage to your hearing and those around you. Please use common sense when
listening to your audio system and practice safe sound.
Copyright
All content included in this manual such as text, graphics, logos, icons,
images and data, are the property of Midbass Distribution Limited t/a VIBE
Technologies Limited (herein referred to as “VIBE”, “us” or “we”) and its
affiliate or their content and technology providers, and are protected by
United Kingdom and International copyright laws. All rights reserved. VIBE TV,
VIBE Arcade, Bass Box, Optisound, Cinesound, BlackAir, BlackBox, Space,
LiteAir, SLICK, BlackDeath, Bubonic, Reaper, Anti-VIBE, FastPlug, BlackHole,
QB69, VIBE Turbo Port, Vibe TurboVent, Pressure Board, Super Driver, VIBE
Pulse, VIBE Power, VIBE Digital, VIBE MAG Plugs, Ferrite Loaded, VIBE Solid
Core, VIBE OCC, VIBE FLAT, ICC, Bass Enhance, Bass Enhance+, QBass, SpeedBass,
PowerBass, N-Wedge, Box Grip, ARBSS, Supercar Series and all stylised
representations of product names, or the abbreviations of product names, as
logos are all trademarks of VIBE. Graphics and logos are trademarks or trade
dress of VIBE Technologies Ltd or its subsidiaries.
VIBE’s trademarks and trade dress may not be used in connection with any
product or service that is not VIBE’s, in any manner that is likely to cause
confusion among customers or in any manner that disparages or discredits VIBE.
All other trademarks not owned by VIBE or its subsidiaries that appear in this
manual are the property of their respective owners, who may or may not be
affiliated with, connected to, or sponsored by VIBE or its subsidiaries.
TO THE FULLEST EXTENT PERMITTED AT LAW, VIBE IS PROVIDING THIS MANUAL AND ITS
CONTENT ON AN “AS IS” BASIS AND MAKES NO (AND EXPRESSLY DISCLAIMS ALL)
REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WITH RESPECT TO
THIS MANUAL OR THE INFORMATION, CONTENT, MATERIALS OR PRODUCTS INCLUDED IN
THIS MANUAL INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN ADDITION, VIBE DOES NOT REPRESENT OR
WARRANT THAT THE INFORMATION CONTAINED IN THIS MANUAL IS COMPLETE OR CURRENT,
AND THAT ALL SPECIFICATIONS AND INFORMATION CONTAINED WITHIN THIS MANUAL ARE
SUBJECT TO CHANGE WITHOUT NOTICE. VIBE RECOMMENDS CAUTION WHEN LISTENING TO
MUSIC REPRODUCED THROUGH VIBE EQUIPMENT. VIBE EQUIPMENT IS CAPABLE OF
PRODUCING SOUND AND SOUND PRESSURE LEVELS THAT CAN PERMANENTLY DAMAGE YOUR
HEARING OF YOU AND THAT OF OTHERS. FOR SAFE AND ENJOYABLE LISTENING, THE SOUND
SHOULD BE CLEAR WITHOUT DISTORTION AT A COMFORTABLE VOLUME. BY USING ANY VIBE
EQUIPMENT, YOU AGREE TO TAKE FULL RESPONSIBILITY FOR YOUR OWN SAFETY AND THE
SAFETY OF OTHERS WHEN LISTENING TO MUSIC AT HIGH VOLUMES THROUGH EQUIPMENT YOU
HAVE
PURCHASED. USE OF ANY VIBE EQUIPMENT CONSTITUTES AGREEMENT TO THIS DISCLAIMER.
Except as specifically stated in this manual, to the fullest extent permitted
at law, neither VIBE nor any of its affiliates, directors, employees or other
representatives will be liable for damages arising out of or in connection
with the use of this manual or the information, content, materials or products
included. This is a comprehensive limitation of liability that applies to all
damages of any kind, including (without limitation) compensatory, direct,
indirect or consequential damages, loss of data, income or profit, loss of or
damage to property and claims of third parties. For the avoidance of doubt,
VIBE does not limit its liability for death or personal injury to the extent
only that it arises as a result of the negligence of VIBE, its affiliates,
directors, employees or other representatives.
Wiring Connections
Please follow the wiring diagram below and ensure that correct polarity is observed as incorrect wiring may cause the subwoofer to be out of phase with the rest of the system and result in a loss of bass.
Run In Procedure
VIBE recommends that you follow the run-in the procedure for the subwoofer
detailed below. When your subwoofer is used for the first time, like most
brand new items it is naturally very stiff and rigid. It will take time for
the moving parts of this subwoofer to loosen up before the subwoofer will be
ready to deliver its full potential.
For the first 30 hours, it is recommended that you play the subwoofer at low
to medium volumes, gradually increasing the volume level as time progresses.
As a guide, if you listen to your subwoofer for one hour every day it will
take a month for the subwoofer to run in properly.
You will notice a big change in the sound of the subwoofer over this period.
As the spider and surround begin to run in, the sound will get deeper and
harder, also the output of the subwoofer will increase as the suspension
loosens up.
The subwoofer is like your car’s engine, it needs a few thousand miles before
you can drive it to its full potential. Driving it into the redline from the
first day will mean engine
damage is certain and will not be covered by warranty. Failure to follow this
simple procedure is the most common reason for a subwoofer to fail after a
very short period of time.
Specification
Model | PULSE10-VO | PULSE12-VO |
---|---|---|
Speaker Size | 10″ (274mm) | 12″ (323mm) |
Peak/RMS Power | 1050W/350W | 1050W/350W |
Sensitivity | 85dB | 86dB |
Frequency Response | 30Hz – 1 kHz | 25Hz – 850Hz |
Impedance | 40 | 40 |
Voice Coil | 2″ 4 layer | 2″ 4 layer |
Magnet weight | 40oz | 40oz |
Magnet dimensions | 5.3″ (137mm) x 0.8″ (20mm) | 5.3″ (137mm) x 0.8″ (20mm) |
Mounting Depth | 5.3″ (133mm) | 5.6″ (142mm) |
Mounting Diameter | 9.1″ (230mm) | 10.9″ (277mm) |
Enclosure Volume | Vented 1 – 2ft3 | Vented 1.5 – 2.5ft3 |
Recommended Amp | POWERBOX400.1M | POWERBOX400.1M |
TS Parameters
Parameter | PULSE10-V0 | PULSE12-V0 |
---|---|---|
Fs | 37Hz | 38.5Hz |
Vas | 25.565L | 42.568L |
Re | 3.2Ω | 3.2Ω |
Qms | 6.001 | 6.756 |
Qes | 0.597 | 0.711 |
Qts | 0.528 | 0.643 |
BL | 11.982Tm | 12.226Tm |
SPL | 85.4dB | 87.2dB |
Sd | 0,033m/2 | 0,049m/2 |
Cms | 165.261uM/N | 124.4127uM/N |
Mms | 111.383g | 137.171g |
Mmd | 107.935mKg | 130.917mKg |
Krm | 7.44mOhm | 6.139mOhm |
Erm | 0.799 | 0.817 |
Kim | 58.727mH | 252.849mH |
Exam | 0.622 | 0.634 |
UK Technical Enquiries
Call 09067031420
Calls cost 50p per minute. Call costs correct 01/02/12
Hours of business 9.00 am – 5.30 pm GMT Monday – Friday.
All calls are recorded for training purposes.
MIDBASS Distribution
PO Box 11000
B75 7WG
International Technical Enquiries
For international technical support please contact the distribution agent for
your country. Please visit www.vibeaudio.co.uk
for more details
Designed and engineered
in England
www.vibeaudio.co.uk
www.youtube.com/vibeaudio
www.facebook.com/vibeaudio
www.twitter.com/vibeaudio
Documents / Resources
|
British Audio PULSE10-V0- 10 Inch 1050 Watts Max
Subwoofer
[pdf] User Manual
PULSE10-V0 10 Inch 1050 Watts Max Subwoofer, PULSE10-V0, 10 Inch, PULSE10-V0
1050 Watts Max Subwoofer, PULSE10-V0 Max Subwoofer, PULSE10-V0 Subwoofer,
PULSE12-V0
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>