ROUGH COUNTRY 22-Up Toyota Tundra Crew Cab Overland Steps Instructions
- July 30, 2024
- Rough Country
Table of Contents
22-Up Toyota Tundra Crew Cab Overland Steps
“`html
Product Specifications:
- Product Name: 22-Up Toyota Tundra Crew Cab Overland Steps
- Kit Contents:
- Driver Side Step x1
- Passenger Side Step x1
- Front Brackets x2
- Rear / Center Brackets x6
- Tools Needed: 13mm Wrench or Socket
- Hardware Included:
- 8mm T-Bolt x8
- 8mm Lock Washer x24
- 8mm Flat Washer x32
- 8mm Lock Nut x8
- 8mm x 30mm Hex Bolt x24
Product Usage Instructions:
-
Remove any stock steps if already installed; stock hardware
will not be reused. -
Install the front bracket on the driver side using the supplied
8mm bolts, lock washers, and flat washers. Tighten with a 13mm
wrench or socket. -
Place the remaining brackets on the factory mounts as indicated
in the illustrations. -
Position the steps on the brackets and align the mounting
plates; secure them with the provided hardware. -
Repeat the process for the passenger side of the vehicle.
-
Regularly inspect and tighten all hardware to ensure
stability.
Frequently Asked Questions (FAQ):
Q: Do I need any additional tools for installation?
A: No, a 13mm wrench or socket is sufficient for installing the
steps.
Q: Can these steps be installed on other vehicle models?
A: These steps are specifically designed for the 22-Up Toyota
Tundra Crew Cab and may not be compatible with other models.
Q: How do I ensure the steps are securely attached to the
vehicle?
A: Make sure to align the mounting plates properly and tighten
all hardware according to the specified torque values.
“`
921400600
22-Up Toyota Tundra Crew Cab Overland Steps
Thank you for choosing Rough Country for all your vehicle needs. Please read
instructions before beginning installation. Check the kit hardware against the
kit contents shown below. Be sure you have all needed parts and know where
they go. If question exist, please call us
@1-800-222-7023. We will be happy to
answer any questions concerning this product. Check all fasteners for proper
torque. Check to ensure for adequate clearance between all components.
Periodically check all hardware for tightness.
KIT CONTENTS: Driver Side Step x1 Pass Side Step x1 Front Brackets x2 Rear / Center Brackets x6
TOOLS NEEDED: 13mm Wrench or Socket
HARDWARE INCLUDED: 8mm T-Bolt x8
8mm Lock Washer x24 8mm Flat Washer x32
8mm Lock Nut x8 8mm x 30mm Hex Bolt x24
Torque Specs:
Size 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 3/4″
Grade 5 15 ft/lbs 30 ft/lbs 45 ft/lbs 65 ft/lbs 95 ft/lbs 135ft/lbs 185ft/lbs
Grade 8 20ft/lbs 35ft/lbs 60ft/lbs 90ft/lbs
130ft/lbs 175ft/lbs 280ft/lbs
Size 6MM 8MM 10MM 12MM 14MM 16MM 18MM
Class 8.8 5ft/lbs
18ft/lbs 32ft/lbs 55ft/lbs 85ft/lbs 130ft/lbs 170ft/lbs
Class 10.9 9ft/lbs
23ft/lbs 45ft/lbs 75ft/lbs 120ft/lbs 165ft/lbs 240ft/lbs
Front Driver Bracket Front
Mounting Bracket Position (Driver Side Shown)
2 Middle and Rear Driver Bracket
INSTALLATION INSTRUCTIONS
1. Remove stock steps if installed. Stock hardware will not be reused. 2.
Refer to the illustration above and install the front bracket in the factory
mounting holes on the driver side using the
supplied 8mm bolts, lock washers, and flat washers. See Photo 1. Tighten using
a 13mm wrench / socket. 3. Place the remaining three brackets in position on
the factory mounts. See Photo 2 & 3
Photo 1
Photo 2
Install Front step brackets.
Install middle and rear brackets
4. Place the steps on the step brackets and line up the mounting plates on the steps and brackets. Place the nut plate in the mounting plates on the steps and secure using the supplied 8mm bolts, lock washers, lock nuts and (4) flat washers for each bolt plate. Tighten with a 13mm wrench. See Photo 4.
Photo 3
Photo 4
Install remaining brackets 5. Repeat for passenger side of the vehicle. 6. Periodically check and tighten hardware.
Secure step to brackets.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.