Vivax CFR-418 Freezer User Manual

Vivax CFR-418 Freezer User Manual

DEAR CUSTOMER
Thank you for buying this freezer. To ensure that you get the best results from your new freezer, please take time to read through the simple instructions in this booklet. Please ensure that the packing material is disposed of according to the current environmental requirements. When disposing of any freezer equipment please contact your local waste disposal department for advice on safe disposal.

This appliance must be only used for its intended purpose. Please read these instructions carefully before installing and powering the refrigerator. The manufacturer is not responsible for improper device usage. Follow the instructions for use. Dispose of your instructions in a known and safe place to keep them in case of reuse.

Safety warnings

Meaning of safety warning symbols
The symbols indicate prohibited matters and those behaviors are forbidden. Non-compliance with the instructions may result in product damage or endanger the personal safety of users.
The symbols indicate matters that must be followed, and those behaviors must be strictly executed in line with the operation requirements. Non-compliance with the instructions may result in product damage or endanger the personal safety of users.
The symbols indicate matters to pay attention to, and these behaviors shall be specially noted. Due precautions are needed or minor or moderate injuries or damages of the product will be caused.

CAUTION

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concering the use of the appliance safely and understand the hazards involved.
• Children shall not play with the appliance.
• Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
• Cleaning and user maintenance shall not be done by children without supervision.
• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices, and other working environments;
  • by clients in hotels, motels, and other residential-type environments, farmhouses;
  • bed and breakfast type environments.

Electricity related warnings

• Do not pull the power cord when disconnecting the power plug from the wall socket. Please firmly grasp the plug and pull out it from the socket directly.
• Never plug in/out the power plug with damp hands to not expose the danger of electrical shock.
• Do not damage the power cord under any condition to ensure safety use, do not use it when the power cord is damaged or the plug is worn.
• Worn or damaged power cords shall be replaced in manufacture-authorized maintenance stations.
• Please use a dedicated grounded power socket which is 10A or more and the power socket shall not be shared with other electrical appliances.
• Do not use extension cords or external timers.
• The power cord should be firmly in contact with the socket or else fires might be caused. Do not pull or band the power cable.
• Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line.
• The refrigerator adopts 220-240V/50Hz AC power, voltage fluctuations over the range of 220-240 ±10%V will cause malfunction or even damage, so a 750W automatic voltage regulator must be installed in concert with the AC power.

Related Warnings for Use

• The refrigerator contains refrigerant R600a gas and Cyclopentane insulation. Gas type is indicated on the label inside the refrigerator. Gas is completely environmentally friendly, R600 is a natural gas and is completely harmless, but flammable.
• When transporting and installing the equipment, make sure that there is no damage to any parts (components) of a refrigerator or freezer. In case of damage, avoid open flame or exposure devices hot springs, and immediately ventilate the room where the device is located. Do not unplug the refrigerator and other electrical appliances considering that spark may cause a fire.
• To ensure safety, it is not recommended that regulators, rice cookers, microwave ovens, and other appliances be at the top of the refrigerator, those recommended by the manufacturer are not included. Do not use electrical appliances in the food pantry.
• Unauthorized demolition or renovation of the refrigerator is not prohibited. It is forbidden to damage the refrigerant lines and the repair and maintenance of the refrigerator must be carried out by professionals.
• The damaged power cord must be replaced by the manufacturer, its maintenance department, or related professionals to avoid danger.
• The surroundings of the appliances around or the embedded structure shall not be obstructed while good ventilation shall be maintained.
• The gaps between refrigerator doors and between doors and refrigerator bodies are small, we note not to put your hand in these areas to prevent squeezing the finger.
• Please be gentle when switching off the refrigerator door to avoid falling articles.
• Do not pick foods or containers in the freezing chamber when the refrigerator is running, especially the metal containers to avoid frostbite.
• Do not allow children to enter or climb the refrigerator to prevent children are sealed in the refrigerator and other electrical appliances considering the refrigerator or children are injured by the falling refrigerator.
• Do not spray or wash the freezer
• Do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.
• Do not place heavy objects on the top of the refrigerator considering that objectives may fall when switching the door, and accidental injuries might be caused.
• Please pull off the plug in case of power failure or cleaning.
• Do not connect the freezer to the power supply within five minutes to prevent damage to the compressor due to successive starts.

Warnings related to placing items

• Do not put flammable, explosive, volatile, and highly corrosive items in the refrigerator to prevent damage to the product or fire accidents.
• Do not place flammable items near the refrigerator to avoid fires.
• This product is a household refrigerator and shall be only suitable for the storage of foods.
• According to national standards, household refrigerators shall not be used for other purposes, such as storage of blood, drugs, or biological products.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Do not place items such as glass bottles or sealed containers of fluid such as bottled beers and beverages in the freezer to prevent bursts and other losses.
• Do not eat ice, which has been removed from the freezer.
• Do not touch frozen food with wet hands. Do not immediately eat frozen food.

WARNINGS

• WARNING Keep ventilation openings, in the appliance enclosure or the built-in structure, clear of obstruction.
• WARNING Do not damage the refrigerant circuit.
• WARNING Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer
• WARNING Do not use electrical appliances inside the food storage compartments of the appliance unless they are of the type recommended by the manufacturer.
• The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Please abandon the refrigerator-freezer according to local regulators for it uses flammable blowing gas and refrigerant.
• Please according to local regulations regarding disposal of the appliance for its flammable refrigerant and blowing gas. Before you scrap the appliance, please take off the doors to prevent children trapped.
• WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
• WARNING: Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
• Do not use extension cords or ungrounded (two-prong) adapters.

Placement

Before using the refrigerator, remove all packaging materials including bottom cushions and foam pads and tapes inside the refrigerator, and tear off the protective film on the door and the refrigerator body (if exists). Keep away all packaging from small children. Do not allow children to play with packaging. Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of the insulating effect.

The refrigerator should be placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust the wheel for leveling if unstable). This product is a freestanding appliance. This refrigerating appliance is not intended to be used as a built-in appliance. There should be more than 70 cm above the top of the appliance and more than 20 cm on both sides and back of the appliance to make it easier to open close and distribute heat.

IMPORTANT: The refrigerator or freezer must be placed so that all feet firmly lying on the ground. Adjust leveling feet to adjust the proper position of the appliance. The device must stand upright and stable!

Warnings related to Disposal
The refrigerator’s R600a refrigerant and cyclopentane foam materials are combustible materials and discarded refrigerators should be isolated from fire sources and cannot be burned. Please transfer the freezer to a qualified professional recycling company for processing to avoid damage to the environment or other hazards.

DANGER: RISK OF CHILD ENTRAPMENT
Please remove the door of the refrigerator or freezer and shelves which shall be properly placed to avoid accidents of children entering and playing in the appliance. If this appliance is to replace an old refrigerator with a lock; remove the lock for safety reasons, to protect children while playing from your lock.

Servicing
The unit should be serviced by an authorized engineer and only genuine spare parts should be used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunction. Contact a qualitative technician. Do not shield the positions of the air outlet and return the air inlet of the refrigerator Do not keep foods of higher temperatures close to the temperature sensor. Take out a drawer from the freezing chamber of the refrigerator and put food directly on the glass partition.

Transport
The appliance should be transported in its original box and partitions or wrapped with a soft cloth. Incorrect packaging may cause damage to the outer surface of the appliance. Before moving the refrigerator, please remove all items in the refrigerator and fasten the glass partitions, fruit and vegetable boxes, and freezer drawers with taps lest the door opens during displacement; Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by holding the edges of the top surface. Do not turn upside, horizontally place or vibrate the refrigerator, The carrying angle cannot be greater than 45° |

NOTE
ANY MALFUNCTION OR DAMAGE CAUSED DURING LOADING, UNLOADING, OR TRANSPORT AFTER THE DELIVERY OF THE PRODUCT TO THE CUSTOMER IS NOT COVERED BY THE WARRANTY.

Freezer use

Names of components

Drawers, food boxes, shelves, etc placed according to the position in the picture above are the most energy efficient. All images in this instruction manual are for indication only; please refer to your unit for details.

Interior accessories (optional, not valid for all models)
Various wire or plastic storage shelves are included with your appliance – different models have different combinations. To make the most of the volume of the fresh food storage compartment and frozen food storage compartment, the user can remove one or more shelves, or drawers, from the appliance, according to their daily use.

Freezer compartment
Warm food must not be placed in the refrigerator until cool to room temperature. It is recommended that foods are tightly closed (in a container or plastic bag) before placing them into the refrigerator.  Shelves can be moved by the amount of space inside the refrigerator to optimally organize space. The freezer is used for storage of food (up to 6 months). For additional information about possible storage duration, check the packaging of the product or food. Never freeze again already thawed food.

Tips for Keeping Food in the Unit

• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food. Cooked meats/fish should always be stored on a shelf above raw meats/fish to avoid bacterial transfer. Keep raw meats/fish in a container that is large enough to collect juices and cover it properly. Place the container on the lowest shelf.
• Leave space around your food, to allow air to circulate inside the unit. Ensure all parts of the unit are kept cool.
• To prevent transfer of favors and drying out, pack or cover the food separately. Fruit and vegetables do not need to be wrapped.
• Always let pre-cooked food cool down before you put it in the unit. This will help to maintain the internal temperature of the unit.
• To avoid contamination of the food, please respect the following instructions:
  • Opening the door for long periods can cause a significant increase in the temperature in the compartments of the appliance
  • Clean regular surfaces that can come in contact with food and accessible drainage systems.
  • Clean water tanks if they have not been used for 48h hours flush the water system connected to a water supply if water has not been drawn for 5 days.
  • To prevent cold air from efromsescapingfrom the unit, try to limit the number of times you open the door. We recommend that you only open the door when you need to put food in or take food out.
  • In case your, device has a freezing compartment with 4 stars, this refrigerating appliance is suitable for freezing foodstuffs In case your device has a freezing compartment with 1,,2, or 3 stars, this refrigerating appliance is NOT suitable for freezing foodstuffs
  • Two-star * frozen-food compartments are suitable for storing pre-frozen food, storing or making creamcream, and making ice cubes.
  • One-, two- and three-star * compartments are not suitable for the freezing of fresh food.
  • If the refrigerating appliance is left empty for long periods, switch it off, defrost, clean, dry, and leave the door open to prevent mold from developing within the appliance.

Cleaning Before Use

Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a ‘Wrung-out’ sponge or cloth. Wash the shelves and salad bin in warm soapy water and dry them completely before replacing them in the unit. Clean the exterior of the unit with a damp cloth. If you require more information refer to the Cleaning section.

Before Plugging in
You must check that you have a socket that is compatible with the plug supplied with the unit.

before turning Oit n!
Do not turn it n until one hour after moving the unit.  The refrigerator shall run 2 to 3 hours before loading fresh or frozen foods; the refrigerator shall run for more than 4 hours in summer in advance considering that the ambient temperature is high.

Start to use

Use a flat screwdriver very, insert it into the gap at the arrow position in the picture, and gently the open flap door. After opening, remove the power cord from the compartment. Close the flap door. After transportation, please let the freezer stay for more than 2 hours before turning on the power, otherwise,  it will lead to a decrease in the cooling capacity of the freezer. After you follow the above instructions, plug the power cord into the power power socket.

Operation

Temperature control panel
Note: The picture above is only for reference. Your model could be slightly different but functional it stays the same.

Display control
When powering on the freezer, the display window will be On for 3s, and then it will enter normal operation display, the original electrified display shall be under 18°C ;

Display of normal operation
If there is no failure, the set temperature or function mode will be displayed; if there is any failure, the failure code will be displayed;

Display Sleep function (Automatic turn off Control Panel Display)
The sleep function will be activated by default after electrifying, after the temperature is confirmed, the display will extinguish after 30s.

The sleep mode could be switched On/Off via a combined key
Press for 5s simultaneously, and when “ ON ” is displayed in the temperature display area once, it indicates the sleep function is activated. To deactivate the Sleep function, repeat the above procedure. When“ OF ” is displayed in the temperature display area once, it indicates the sleep function is deactivated.
Operation control: Sleep function is active: After temperature confirmation for tempering every time, the display area will extinguish for another 30; Sleep function is not active: After temperature confirmation for tempering every time, the display area will not extinguish and keep.

Lock and unlock Control panel
After the power plug-in, the control panel is in a locked state by default. It is required to unlock the control panel before you start to operate.

Unlock

1. Press the key and keep it pressed for 3s. The display area will blink once. Your freezer is Unlocked.
2. Now, you can adjust the settings of your freezer. After no-key operation for 30 seconds, the freezer will enter automatically into lock state and the control panel display will blink once.

Lock

1. Press the key and keep it pressed for 3s. The display area will blink once.
2. The set temperature will take effect immediately. Once entering the lock state, the control panel display will not blink.
3. After no-key operation for 30 seconds, the freezer will enter automatically into lock state and the control panel display will blink once.

Fahrenheit or Celsius temperature display
By long press, the ey for 3s, Fahrenheit, and Celsius temperature conversion could be implemented. When the Celsius temperature value is displayed on the screen, the “C” symbol (3) will light up on the control panel. When the Fahrenheit temperature value is displayed on the screen, the “F” symbol (4) will light up on the control panel.

Temperature setting

• By pressing the key the display will show the freezer’s set temperature.
• By pressing the key once, the freezer temperature will decrease by 1°C or 1°F.

Super-freeze function

Enter super-freeze The
The “Super Freeze” function turns on rapidly for 24 hours. After that, the freezer will continue to work at the original set temperature. When exiting the super-freeze mode, the set temperature will automatically return to the set temperature before the Superfreeze mode.

Activate Super Freeze mode
Press the key so that the super-freeze indicator lamp (2) will light on. The display will change to show the lowest temperature (-30°C/-22°F) and Compressor continious operates.

Quit Super-freeze

1. Power On freezer after Power failure
2. After continuous operation of the compressor for 24 hours, the freezer will automatically cancel Super freeze mode.
3. If sensor failure occurs under Super-freeze mode, you can quit super-freeze;
4. Under Super-freeze mode, you can quit the super-freeze mode by repressing the key

HiHigh-temperaturelarm
In case of high temperature in frthe freezer compartment, the warning lamp will be on. Check the freezer and if you find that it is not working properly, contact an authorized service center.
Note: when you connect your appliance to the power supply, the warning symbol will light up at first, until the set temperature in the freezer is reached. This is a normal phenomenon.

Power failure memory
During power failure, the sudden operating state of power failure will be locked, after power is recovered, the operation shall be continued according to the setting before the power failure. The super-freeze function will be a quitter power failure.

Failure code “E2”
If the failure happens, the display area will show the corresponding error code “E2”. It means that the Temperature sensor is not working properly The user shall contact an authorized service for maintenance.

Maintenance

Noise Inside the Unit!
You may notice that your unit makes some unusual noises. Most of these are perfectly normal, but you should be aware of them! These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has become more pronounced since the introduction of CFC-free gases. This is not a fault and will not affect the performance of your unit. This is the compressor motor working, as it pumps the refrigerant around the system.

Change the Light Bulb (if exists)
The LED lamp must be replaced by a thorized service. Please contact an authorized service or manufacturer.

Cleaning

Please unplug the Freezer for defrost and cleaning Dusts behind the freezer and on the ground shall be timely cleaned to improve the cooling effect and energy saving. The interior of the freezer should be cleaned regularly to avoid odor. Soft towels or sponges dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freezer shall be finally cleaned with clear water androgyny cloth. Open the door for natural drying before the power is turned on.

• Remove all the shelves.
• Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm water using a “wrung-out” sponge or cloth. Wipe completely dry before replacing the shelves and salad bin.
• Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish.
• Make sure that the door is closed to avoid the polish getting on the magnetic door seal or inside the unit.
• The grille of the condenser (if exexistsat the back of the unit and the adjacent components can be vacuumed using a soft brush attachment.

Cleaning Tips
Condensation may appear on the outside of the unit. This may be due to a change in room temperature. Wipe off moisture residue. In the summer months, with high temperatures and humidity in the air, a certain amount of ice can accumulate along the inner edges of the freezer. This is a normal phenomenon. In such conditions, do not open the freezer door unless necessary, and remove the excessive amount of ice.

If the problem continues, please contact a qualified technician for assistance. Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpaste organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid,  or alkaline items clean refrigerator considering that this may damage the fridge surface and interior. Do not rinse with water so as not to affect the electrical insulation properties. Please use a dry cloth when cleaning lighting lamps, temperature controlknobs, b, and electrical components.

Defrost
Defrost the freezing compartment whenever the layer of frost on the surface of the evaporator reaches 3 or 4 mm.

1. Set the thermostat tat at the “OFF” position and disconnect the freezer from the air supply.
2. Remove drawers with frozen food, Store frozen food in a cold place.
3. Open the outflow holes and drainage holes; indoor doors will naturally melt,
4. Wipe the water with a dry, soft cloth.
5. You can use an ice scraper to remove frosting/ice after the frost has melted, discard the melted water, and clean the interior.
6. Dry up the interior.
7. Put drawer-basket into the apartment and put back frozen foods.
8. Plug in the freezer on the main supply and turn the thermostat to the desired setting. It is recommended that you use frozen food as soon as possible Do not use metal utensils or electric heater for defrost so as not to damage e the appliance.
9. Please remove the food and put it in a cool place when defrosting before removing drawers and other accessories.

Switching Off for Long Periods of Time
Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended to reduce the frequency of opening the door and not put fresh foods into the freezer. When the unit is not in use for a long peperioddisconnect it from the main supply, empty all food, and clean the appliance. Keep the door open to avoid the bad odor. Continuous operation is recommended when the freezer is started. Please do not move the freezer under normal circumstances so as not to affect the refrigerator’s service life.

Frequently asked questions

The following simple issues can be handled by the user. Please call the after- sale service department if the issues are not settled.

Unit is not work

| Whether the freezer is plugged and connected to power; Low voltage;

Failure of power or tripping circuit

---|---

Odor

| Odorous foods should be closely wrapped; Whether foods are rotten;

Whether the interior shall be cleaned

Foods in the refrigerating chamber are frozen| Whether the thermostat is over-adjusted; Whether foods containing water are put inside the glass partition.

Long-term operation of the compressor

| Normally, the refrigerator operates for a longer time in summer when the ambient temperature is higher; Do not put too much food in the freezer at one time; Do not put foods until they are cooled;

Frequent opening of the refrigerator door. Thick frost layer (defrost is needed)

The refrigerator door cannot be properly closed.|

The freezer door is stuck by food packages; Too much food; Tilt the refrigerator.

Loud noises

| Whether the food is leveled, whether the refrigerator is balanced;

Whether the refrigerator parts are properly placed.

Warm tips

• The freezer enclosure may emit heat during operation, especially in summer, this is caused by the radiation of the condenser, and it is a normal phenomenon.
• Condensation: The condensation phenomenon will be detected on the exterior surface and door seals of the freezer when the ambient humidity is large, this is a normal phenomenon, and the condensation can be wiped away with a dry towel.
• Airflow sound: Refrigerants circulating in the refrigerant lines will produce an eruption of sound and grunts which is normal and does not affect the cooling effect.
• Buzz: Buzz will be generated by running compressor especially when starting up or shutting down.
• Clatter: The solenoid valve or electric switch valve will clatter which is a normal phenomenon and does not affect the operation.
• Due to the humid and warm environment, ice may accumulate at the edges of the freezer compartment. It’s normal. If necessary, remove the accumulated ice or defrost according to the instructions.
• During such weather conditions, avoid opening the door
  frequently.

Tips for Energy savings
Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, close it as soon as possible. Now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance). In normal temperature conditions, please arrange the thermostat in the middle setting. Before loading the appliance with packages of fresh food, make sure they are cooled to ambient temperature. Ice and frost layers increase energy consumption, so clean the appliance as soon as the layer is 3-5 mm thick. If it is the outer condenser, the rear wall should be always clean and free of dust or any impurities.

• The appliance should be located in the coolest area of the room, away from heat-producing appliances or heating ducts, and out of direct sunlight.
• Let hot foods cool to room temperature before placing them in the appliance.
• Overloading the appliance forces the compressor to run longer.
• Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
• The appliance storage bin should not be lined with aluminum foil, wax paper, or paper towels. Liners interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches.
• Remove as many items as needed at one time, and close the door as soon as possible.

Spare parts
The ordered parts in the following table can be acquired from the channel:

Ordered Part

|

Provided by

|

Minimum Time Required for Provision

---|---|---

Thermostat

|

Professional maintenance personnel

|

At least 7 years after the last model is launched on the market

Temperature sensors

| Professional maintenance personnel| At least 7 years after the last model is launched on the

market

Printed circuit boards

| Professional maintenance personnel| At least 7 years after the last model is launched on the market

Light sources

| Professional maintenance personnel| At least 7 years after the last model is launched on the market

Door handles

| Professional maintenance personnel and end-users| At least 7 years after the last model is launched on the market

Door hinges

| Professional maintenance personnel and end-users| At least 7 years after the last

model is launched on the market

Trays

| Professional maintenance personnel and end-users| At least 7 years after the last model is launched on the

market

Basket

| Professional maintenance personnel and end-users| At least 7 years after the last model is launched on the market

Door baskets

| Professional maintenance personnel and end-users| At least 7 years after the last model is launched on the market

Climate classes
For the climate class of your device, please refer to the Rating label on your device.

• Extended temperate: this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 C to 32 C;
• Temperate: this refrigerating appliance is intended t be used at ambient temperatures ranging  from 16 C to 32 C;
• Subtropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 C to 43 C.
• Tropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C

Disposal, EU Declaration of Conformity

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
To protect our environment and to recycle the raw materials used as completely as possible, the consumer is asked to return unserviceable equipment to the public collection system for electrical and electronic. The symbol of the cross indicates that this product must be returned to the collection point for electronic waste to feed it by recycling the best possible raw material recycling.

By ensuring this product you will prevent possible negative effects on the environment and human health, which could otherwise be caused due to improper disposal of that product. The recycling of materials from this product will help to preserve a healthy environment and natural resources. For detailed information about the collection of EE products contact M SAN Grupa or the dealer where you purchased the product.

EU DECLARATION OF CONFORMITY
This device is manufactured at the applicable European standards and by all applicable Directives and Regulations. EU declaration of conformity can be downloaded from the following link: www.msan.hr/dokumentacijaartikala
Product information sheetProduct Information sheet data entered into the EPREL database For more info and Product Informsheet, please scan the QR code or visit Vivax web site: www.vivax.com

M SAN GRUPA d.o.o., Dugoselska ulica 5, 10372 Rugvica, tel: +385 1 3654 961 www.msan.hr e‐mail: helpdesk@msan.hr

Download PDF:Vivax CFR-418 Freezer User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>