VIVAX SP-7080H Soundbar Instruction Manual

: June 9, 2024
: VIVAX

Table of Contents

VIVAX SP-7080H Soundbar
Features
- Accessories
IMPORTANT SAFETY INSTRUCTIONS
PREPARATION FOR USE
OPERATION
MAINTENANCE & SAFETY
TROUBLESHOOTING
- Disposal of Waste Electrical & Electronic Equipment
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VIVAX SP-7080H Soundbar

VIVAX-SP-7080H-Soundbar-PRODUCT-IMAGE

Features

Audio output: 70W RMS Speaker drivers: 2 x 2″ 15W units + 1 x 5.25″ 40W subwoofer units
Bluetooth version: 5.0
Bluetooth range: Up to 10m
Connections: USB, AUX in, Optical, Coaxial, HDMI(ARC),DC IN, SW OUT
Power supply: Soundbar DC 19V 2.5A
Dimensions: Soundbar 8006560 mm Subwoofer 220x190x270 mm

Accessories

AC adaptor DC 19V 2.5A
AUX cable
Wall mounting kit
Remote control
User manual

Welcome
Thank you for purchasing the Soundbar Audio system Vivax SP-7080H.
It is important to read this user manual prior to using your new product for the first time. In order to fully benefit from this product, please follow the instructions in this user manual very carefully. Store this user manual in a safe place for future reference. We are sure your new Soundbar system will satisfy your needs.

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.
Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
Charger Cable Protection – Charger cable should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.
Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. In that case, immediately disconnect power supply and contact authorized service.
Attachments – Do not use attachments not recommended by the product manufacturer.
Periods of Non use – If the unit is to be left unused for an extended period of time, such as a month or longer, the power charging cable should be unplugged from the unit to prevent damage. Storage device on dry and dark place.
Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.
Using Audio product prolonged periods or at a high volume can damage your hearing permanently. If you experience noise in the ears or other problems immediately stop using the unit. It is recommended to use Audio unit at a moderate volume.
Place exposed to vibration can affect the damage of internal parts of the device. The device should not be placed near open flames and sources
of intense heat, such as, electric heaters.
Do not allow children to play with device.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of knowledge and experience to use the appliance, unless they are supervised by a person who is responsible for their safety or you’re not received training on the use of appliances¸.
Place the unit on a hard and flat surface so that the unit does not tilt.
Do not cover the unit. Adequate ventilation with a minimum gap of 15cm between the ventilation holes and surrounding surfaces is necessary to prevent heat build-up

PREPARATION FOR USE

Unpacking and Setup

Carefully remove the unit from the display carton and remove all packing material from the unit itself.
Do not remove any labels located on either the back or button cabinet of the unit.

CONNECTING ELECTRICAL POWER AND SUBWOOFER

Use the original adapter (DC 19V 2.5A) to connect the Soundbar to an electrical outlet.
Connect the power adapter to the Soundbar and then to a wall socket.
Don’t install the unit in or near a place where it may come in contact with rain, moisture or other liquids.
Subwoofer connection –use attached cable to connect main unit with subwoofer unit SW OUT connector on main unit

REMOTE CONTROL AND FUNCTION KEYS

Power / Standby Button
Mode Button (Cycle through different inputs)
Volume up (+)
Volume down (-)

BUTTON	FUNCTION	BUTTON	FUNCTION
Power ON/OFF	MODE	Shifting between

OPERATION

Power On/Off:
Press the Power on/off button on the remote control or soundbar control panel to turn the unit on and off.

HDMI(ARC):
Connect an HDMI ARC compatible device to the HDMI(ARC) port on the soundbar using a HDMI cable (not supplied). Select HDMI(ARC) mode either by pressing the MODE button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until ARC is displayed on the LED display. Ensure HDMI ARC is selected as the TV’s audio output, then adjust the volume of soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.

AUX in:
Connect a compatible device using the 3.5mm – 3.5mm stereo jack cable. Select AUX mode either by pressing the MODE button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until AUX is displayed on the LED display. Ensure the connected device is producing an audio signal, then adjust the volume of soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.

Optical in:
Connect a compatible device to the OPTICAL input on the soundbar using a digital optical cable (not supplied). Select OPT mode either by pressing the MODE button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until OPT is displayed on the LED display. Ensure Optical SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.

Coaxial in:
Connect a compatible device to the COAXIAL input on the soundbar using a digital coaxial cable (not supplied). Select COAX mode either by pressing the MODE button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until COA is displayed on the LED display. Ensure Coaxial is selected as the TV’s audio output, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.

Note:
OPTICAL/HDMI ARC/COAXIAL mode: If the the device has no sound output, you may need to activate the PCM output on your source device (e.g. TV, Set‐top Box, DVD, or Blu‐ray player

Bluetooth:
Press the MODE button on the remote control or repeatedly pressing the MODE button on the soundbar control panel until BT is shown on the LED display. The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device you wish to connect is also in pairing mode and search for VIVAX SP‐7080H in its device list. When the two devices are paired, the LED display on the soundbar will stop flashing and remain constant. (The soundbar will now automatically re-pair with this device whenever it is within range and has Bluetooth turned on.) Once paired, the remote control can be used to play, pause and navigate between tracks on compatible iOS and Android devices.
Note: Hold the BT button on the remote control to disconnect the bluetooth connection between the phone and the soundbar.

USB media mode:
The soundbar is compatible with USB flash drives of up to 32GB in size and can play audio files directly. Simply insert a compatible drive into the USB port on the back of the soundbar and the unit will automatically switch to USB mode and play the first compatible track. The media controls on the remote control can be used to play, pause and navigate between tracks on the flash drive, and the LED display will indicate the current track time.

USB repeat mode
(also accessed via the remote control) enables single track repeat (ONE), all track repeat (ALL) The media player also has a memory function that will recall and continue from the last-played point when a USB flash drive that has previously been used with the soundbar is reinserted.

Equalizer modes:
The soundbar has 3 equalizer presets, tailored to complement various styles of music. Press the EQ button on the remote to choose between Music (EQ1), Movie(EQ2), News (EQ3).

Wall mounting:
The soundbar has two keyhole slots on the back to enable wall mounting, using the fixings provided.

MAINTENANCE & SAFETY

Place the unit on a hard and flat surface so that the unit does not tilt.
Do not expose the unit to excessive humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.
Do not cover the unit. Adequate ventilation to prevent heat build-up.
To clean the set, use a soft dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the cabinet.

TROUBLESHOOTING

If a fault occurs, it is important you first check the points listed below before taking the unit for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center.

WARNING:
no circumstances should you try to repair the unit yourself, as this will invalidate the warranty.

No Sound / Power

Volume not adjusted
Adjust the VOLUME

No reaction to operation of any of the controls

Electrostatic discharge
Switch off the unit. Connect it after a few seconds

TECHNICAL SPECIFICATIONS

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Vivax (MSI) is under license. Other trademarks and trade names are those of their respective owners.

Disposal of Waste Electrical & Electronic Equipment

This symbol on the product(s) and / or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Alternatively, in some countries you may be able to return your products to your local retailer upon purchase

of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

Disposal of waste batteries
Check local regulations for disposal of waste batteries or call your local customer service in order to get instructions on the disposal of old and used batteries. The batteries in this product should not be disposed of with household waste. Be sure to dispose of old batteries in special places for disposal of used batteries that are found in all retail shops where you can buy batteries.

EU Declaration of Conformity
This device is manufactured in accordance with the applicable European standards and in accordance with applicable RED Directives 2014/53/EU and Regulations. The full text of the EU declaration of conformity is available at the following internet address: www.msan.hr/dokumentacijaartikala where you can buy batteries.

EU Declaration of Conformity
This device is manufactured in accordance with the applicable European standards and in accordance with applicable RED Directives 2014/53/EU and Regulations. The full text of the EU declaration of conformity is available at the following internet address: www.msan.hr/dokumentacijaartikala

www.VIVAX.com