VIVAX BS-800 BT Audio System Instruction Manual

: June 13, 2024
: VIVAX

Table of Contents

Features
Accessories
Welcome
IMPORTANT SAFETY INSTRUCTIONS
PREPARATION FOR USE
POWER SUPPLY‐CHARGING
OVERVIEW OF THE PLAYER
OPERATION
BLUETOOTH WIRELESS
FM RADIO
REMOTE CONTROLLER
MAINTENANCE & SAFETY
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VIVAX BS-800 BT Audio System

VIVAX BS-800 BT Audio System

Features

Bluetooth 5.0 with wireless range 10m.
TWS (True Wireless Stereo) function – connection 2 speakers as pair
2×8″ Powerful Woofer + 1×3” middle speaker driver + tweeter 1×3”
RMS output 80W
LED color changing lights
Digital FM radio
1x Wireless Microphone + 1x Microphone and guitar inputs (5mm)
AUX IN 3,5mm audio input
AUDIO OUT RCA audio output
USB playback port ‐ supports MP3 file format, up to 64GB
Built‐in rechargeable battery 4500mAh.
Playing time: Aprox: 12 hours at Mid volume, up to 2h on Max volume

Accessories

Power and charger cable
User manual
Remote controller
Wireless Microphone

Welcome

Thank you for purchasing the Bluetooth Audio system VIVAX BS‐800.
It is important to read this user manual prior to using your new product for the first time.
In order to fully benefit from this product, please follow the instructions in this user manual very carefully. Store this user manual in a safe place for future reference. We are sure your new Micro Audio system will satisfy your needs.

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should note placed in a built‐in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.
Heat – The unit should be situated away from direct sunlight or heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
Charger Cable Protection – Charger cable should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.
Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. In that case, immediately disconnect power supply and contact authorized service.
Attachments – Do not use attachments not recommended by the product manufacturer.
Periods of Non use – If the unit is to be left unused for an extended period of time, such as a month or longer, the power charging cable should be unplugged from the unit to prevent damage. Storage device on dry and dark place.
Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.
WARNING : Unit contains Rechargable batteries. To change batteries in case that battery became weak, contact your Official Service or Dealer.
- Unit and batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.
- Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.
Using Audio product prolonged periods or at a high volume can damage your hearing permanently. If you experience noise in the ears or other problems immediately stop using the unit. It is recommended to use Audio unit at a moderate volume.
Place exposed to vibration can affect the damage of internal parts of the device. The device should not be placed near open flames and sources of intense heat, such as, electric heaters.
Do not allow children to play with device.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of knowledge and experience to use the appliance, unless they are supervised by a person who is responsible for their safety or you’re not received training on the use of appliances¸.
Place the unit on a hard and flat surface so that the unit does not tilt.
Do not cover the unit. Adequate ventilation with a minimum gap of 15cm between the ventilation holes and surrounding surfaces is necessary to prevent heat build‐up

PREPARATION FOR USE

Unpacking and Setup

Carefully remove the unit from the display carton and remove all packing material from the unit itself.
Do not remove any labels located on either the back or button cabinet of the unit.

POWER SUPPLY‐CHARGING

The unit is supplied with powerful rechargeable battery 4500mAh. Unit can play music many hours powered by battery. When the battery becomes weak, the device will turn off. Please use the attached Power cable, plug in into AC Power socket to charge battery.

Power off the unit („OFF / Battery Recharge“ Power Switch position).
You can charge unit in ON state („AC Power“ POWER SWITCH position), but charging will go slower.
Note: When playing music during charging, please put the volume to middle, because
for some music with heavy bass, the charger may can not afford the high current
temporarily under the maximum volume
Put the provided Power cable into the AC Power socket on the back side of the unit.
Connect the other end of the Power Cable to Power outlet 100‐240V, 50/60Hz.
The charging indicator keep Red lighting.
- Charge time should be aprox. 6‐7 hours.
- When Battery is fully charged, the indicator light will become green.

ATTENTION: In order to prolong the life of battery, please do not leave unit continuously on Charger or charge unit more than 10 hours.

OVERVIEW OF THE PLAYER

Control Panel

GUITAR :
5mm Wired Guitar input.
MIC IN :
Wired Microphone input. Adjust Microphone Volume and Echo affect by pressing MENU button and rotate Volume button.
: Previous track:

USB mode: Short press the
button to select
Previous track
Long Press button (above 3 seconds) to search fast backward.
BT mode: Short Press to select the Previous track.
Long Press no
function.
FM mode: Short press to select the Previous FM channel Long Press above 3 seconds to step FM searching.
Line in mode: No function

NEXT TRACK:
USB mode: Short press the button to select Next track Long Press button (above 3 seconds) to search fast forward.
BT mode: Short Press to select the Next track Long Press no function.
FM mode: Short press to select the Next FM channel
Long Press above 3 seconds to step FM searching
Line in mode: No function
MENU:
Short press the screen to display: Bass (b) / Treble (t) / MIC vol (CU) / Echo (EC), when the screen shows the sound effect you want to adjust, turn the volume knob to adjust it; Long Press above 3 seconds for reset Audio settings to default factory settings.
VOLUME:
Rotate button to adjust volume.
AUX IN:
Analog 3,5mm Audio input. Connect External Audio device to Play Audio.
USB:
USB Memory reader. Once you insert USB memory, unit will automatically switch into Reading mode.
LIGHT :
Change Front Speakers Led light illumination.
PLAY / PAUSE :
USB / BT mode: Short press the button to Play/Pause track.
FM mode: Short press the button for Automatic search and store FM station into unit memory. After search all FM band, searching will be stopped and FM Radio station will start with play the first FM station (P01).
Line in mode No function.
MODE:
Short Press button to skip between working modes: FM / Bluetooth connection / LINE IN / USB
Mode Press button longer than 3 seconds to turn On/Off Voice prompt.
POWER SWITCH:
Press button to choose one of 3 available working modes: AC Power (work on AC power supply), OFF/Battery Charge (Power off and Charging the battery), Battery Power (work on DC Battery power).
FM ANT:
FM Antenna wire. Elongate antenna to achieve better FM Radio reception.
LINE OUT:
To connect other Audio speaker or Audio Amplifier
POWER IN:
Power cable socket. Insert Power cable into socket for charging or working unit on AC 100‐ 240V/50‐60Hz Power supply.

OPERATION

USB
Simply insert your USB media and the unit will automatically enter USB mode and a voice prompt can be heard (if you turn on Voice prompt function). Alternatively, you can select the USB mode by short pressing the MODE button repeatedly until display show desired working mode.
You can now play or scroll through the tracks using the Play/Pause , Previous track or Next track buttons.

BLUETOOTH WIRELESS

Pairing & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the steps listed here.

Press the MODE button to select BLUE Mode. The display will show “BLUE” to announce Bluetooth Mode.
Using the controls on your Bluetooth device, scan for and select BS‐800 in your Bluetooth settings to pair. Refer to the user’s manual for your specific device for instructions on pairing\ and connecting Bluetooth devices.
When successfully paired, the display will turn solid, a voice will announce be heard
Use the controls on the connected device to select and begin playing audio. Audio played through the connected Bluetooth device will now be heard through the speaker. Use the controls on the speaker or the connected device to play, pause, and adjust volume.
To pair another Bluetooth device, you must first break the current Bluetooth connection by pressing BT button. A voice will be heard and the display will flash “blue” which is now in pairing mode for the new device.

FM RADIO

Radio Tuning and Saving Station Presets
An FM receiver is built into the speaker. Adjust the position of the speaker to improve FM radio reception.

Press the MODE button to switch to FM Radio Mode. The display will show an FM radio frequency and a voice will announce FM Mode (if voice prompt is turn on).

```
* Press to automatically scan and save FM stations as presets. Saved radio stations will be assigned a “Pxx” number.
```
- Press Previous track or Next track buttons to cycle through presets FM Radio stations.
  Note: When searching or listening FM Radio stations, better reception will be achieved if the unit is not plugged on AC power (working on batteries). It is recommended that the device operate in battery mode during the FM Radio play.

AUX IN

Requires a 3,5mm audio cable (not included). Note: Equalizer settings are not usable in AUX In Mode.

Press MODE to switch to LINE IN Mode, the display will show “LINE IN” and a voice will announce LINE IN Mode.
Connect 3,5mm audio cable to the AUX IN on the unit and the audio output/headphone jack on an audio device.
Use the controls on the connected device to select and play audio.

MICROPHONE AND GUITAR INPUTS
Requires a microphone and/or guitar with a 1/4 in. audio cable or 1/4 in. adapter (not included).

Connect a microphone to the Mic input and/or a guitar to the Guitar input on the unit. The speaker will play audio from the microphone and/or guitar as long as it is connected.
Use the controls on the speaker to adjust microphone volume and Mic effects.

TWS (True Wireless Stereo) function:
If you have one more this speaker, you can connect two speakers as a pair for a stronger stereo and surrounding effect.
Note: This function is active under BT,LINE IN,FM working modes. Can not use in USB mode!
Please follow the steps below for TWS setup:

Turn On two speakers and enter into Bluetooth mode
Long press PAUSE button on one speaker for 2 seconds, “SLAV” will flash on the display.
When the “SLAV ” stop flashing means it has connected with each other;
The speaker which show “BLUE” is main speaker, and another one show “SLAV” is the slave speaker.
Note: It will spend some seconds when first time pairing;
Turn on the Bluetooth on your phone, find “bluetooth name” and pair it;
Note: The two speakers can play the same music in TWS mode after connect successfully The two speakers can automatically achieve TWS re‐connection..

WARNINGS:
DO NOT CHARGE THE SPEAKER OR A MOBILE DEVICE WHILE IT IS NEAR WATER OR IF IT MAY GET WET.
DO NOT LEAVE DEVICE UNATTENDED DURING THE BATTERY CHARGE!
ALWAYS DISCONNECT POWER CABLE IF UNIT WILL NOT USE LONGER TIME!
IF YOU DO NOT USE THE DEVICE FOR A LONG TIME, CHARGE THE BATTERY EVERY 6 MONTHS.

REMOTE CONTROLLER

MUTE: Sound mute in any mode
LED COLOR: Change LED Color Illumination
MODE: Short Press button to skip between working modes: FM / Bluetooth connection / LIN IN (AUX) / USB Mode
REC (RECORDING): USB must be inserted; Press button to start record function in any mode. If you want to stop the Recording press “REC PLAY ” button to stop and play the record.
Note: You can record sound from Mic and Guitar input only and it would stop playing music when open Record in any mode. The Product would record an empty file even when not plugged a Mic and Guitar! The recording file is WAV format saved into USB device.
ECHO + / ‐: Adjust Microphone Echo effect
BASS +/‐: Adjust Bass sound
EQ: Press button to change preset Audio modes: FLAT, POP, ROCK, JAZZ, BASS
M VOL.: Adjust Microphone Volume
STANDBY SWITCH: Press to Power On/Standby
LED MODE: Press button to change LED Light mode
BT (BLUETOOTH): Switch to Bluetooth working mode.
LED ON/OFF: Press to Turn On/Off LED light
REPEAT: Press button to make the single repeat and repeat all.
REC PLAY (RECORDING PLAY) : Play Recorded track saved on USB
R DEL (DELETE RECORDING) : Delete Recording (Delete the files that already saved in USB)
M‐PRI (MICROPHONE PREFERENTIAL) : Give priority to Mic voice volume according to music track , only can work when the Mic jack connected
TREBLE +/‐: Adjust Treble sound
VOLUME +/‐ : Adjust Master Volume
PLAY / PAUSE:
USB mode: Short press the button to Play/Pause track.
FM mode: Short press the button for Automatic search and store FM station into unit
memory. After search all FM band, searching will be stopped and FM Radio
station will start with play teh first FM station (P01).
Line in mode: No function.
►►| NEXT SONG:
USB mode : Short press the button to select Next track. Long Press button (above 3
seconds) to search fast forward.
BT mode : Short Press to select the Next track. Long Press no function.
FM mode : Short press to select the Next FM channel. Long Press above 3 seconds to
step FM searching
Line in mode: No function
|◄◄ PREVIOUS SONG:
USB mode : Short press the button to select Previous track. Long Press button (above
3 seconds) to search fast backward.
BT mode : Short Press to select the Previous track.
Long Press no function.
FM mode : Short press to select the Previous FM channel. Long Press above 3 seconds
to stop FM searching.
Line in mode : No function
NUMERIC BUTTONS:
USB mode: Choose track number
FM Radio mode: Choose FM channels
Other mode: No function

REMOTE CONTROL BATTERIES (not included in all models)
Open the battery compartment and insert 2xAAA batteries, (Preferably Alkaline) with the correct polarity as indicated by the“ +”and“‐” symbols inside the compartment.

WARNING :

Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire.
Do not mix battery types or combine used batteries with new ones.
Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
If you do not intend to use the remote control for a long time, remove the batteries.
Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.
Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

MAINTENANCE & SAFETY

Place the unit on a hard and flat surface so that the unit does not tilt.
Do not expose the unit to excessive humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.
Do not cover the unit. Adequate ventilation to prevent heat build‐up.
To clean the set, use a soft dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the cabinet.

TROUBLESHOOTING

If a fault occurs, it is important you first check the points listed below before taking the unit for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center.
WARNING: no circumstances should you try to repair the unit yourself, as this will invalidate the warranty.

No Sound / Power

Volume not adjusted
Adjust the VOLUME
Battery is Empty
Connect the power cord for charging

No reaction to operation of any of the controls

Electrostatic discharge
Switch off the unit. Connect it after a few seconds

TECHNICAL SPECIFICATIONS

GENERAL
Power Requirement| AC: 100‐240V, 50/60Hz
Power consumption| 80W
Battery / Working time*| Lead-acid, 4500mAh / Aprox. 2h on Max / 12h on moderate volume
Dimensions| Approx. 343 mm(D)x343mm(W)x750mm(H)
Operation temperature| +5°C ‐ +35°C
RECEIVER SECTION
FM Tuning Range| FM: 87.5‐108 MHz
BT Data / Range| 2402‐2480 MHz, Max Antenna gain: 0dBi, Range up to 10m***
AUDIO SECTION
Output Power| Maximum 80 Watt RMS, 40Hz‐18kHz, SNR >70dB
Speakers| Bass: 2x200mm, / Mid: 1x76mm, Twitter: 1x76mm,
ACCESSORIES
Instruction Booklet| 1
2 pin AC Power cable| 1
Remote controller| 1
Wireless Microphone| 1

Design and specifications subject to change without notice.
Working battery time is approximative; It depends about room temperature, battery condition and how unit is use.
Bluetooth range is affected by walls, obstructions, and movement. For optimal performance,
place the product in your room at line of sight, so it is unaffected by walls, furniture, etc.

Disposal of Waste Electrical & Electronic Equipment

This symbol on the product(s) and / or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

Disposal of waste batteries
Check local regulations for disposal of waste batteries or call your local customer
service in order to get instructions on the disposal of old and used batteries. The
batteries in this product should not be disposed of with household waste. Be sure to
dispose of old batteries in special places for disposal of used batteries that are found
in all retail shops where you can buy batteries.

EU Declaration of Conformity
This device is manufactured in accordance with the applicable European standards and in accordance with applicable RED Directives 2014/53/EU and Regulations.
The full text of the EU declaration of conformity is available at the following internet address: www.msan.hr/dokumentacijaartikala

Servis: Tel. 01 601 01 50, Mob. 031 340 834
E-mail. [email protected]
Web: http://www.servic.si