VIVAX CHO-60CHA100T X Range Cooker Hood User Manual

VIVAX CHO-60CHA100T X Range Cooker Hood

Thank you for choosing this cooker hood.
This instruction manual is designed to provide you with all required instructions related to the installation, use and maintenance of the appliance.
In order to operate the unit correctlyand safety, please read this instruction manual carefully before installation and usage.
The cooker hood use high quality materials, and is made with a streamlined design. Equipped with large power electricmotor and centrifugal fan, it also provides strong suction power, low noise operation, non-stick grease filter and easy assembly installation

It is important that you read these instructions before using your product and we strongly recommend that you keep them in a safe place for future reference.

WELCOME!
This device meets the highest standards, innovative technology and high comfort use.
Read these instructions carefully before using your new unit, and keep it carefully.
If you follow the instructions, your new appliances will provide you with many years of good service.
READ CAREFULLY THIS MANUAL AND KEEP THEM FOR FUTURE REFERENCE!
IF YOU SELL OR TRANSFER DEVICE TO OTHER PEOPLE, BE SURE TO INCLUDE THESE INSTRUCTIONS!
IMPORTANT SAFETY INSTRUCTIONS WARNING

• The flash with the symbol of arrowhead, inside an equilateral triangle alerts the user about the presence of a dangerous tension not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution.
• The point of exclamation inside an equilateral triangle alerts the user about the presence of important operating instructions and maintenance in the document enclosed in the package.

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN
Do not open the cover. In no case the user is allowed to operate inside the unit. Only a qualified technician from the manufacture is entitled to operate. By ignoring the safety instructions, the manufacturer cannot be hold responsible for the damage.

 SAFETY PRECAUTIONS

1. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction.
2. Children being supervised not to play with the appliance.
3. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they heave been given supervision or instruction concering use of the appliance in a safe way and understand the hazards involved.
4. Children shall not play with the appliance.
5. Cleaning and user maintenance shall not be mad by children without supervision.
6. There shall be adequate ventilation in the room when the range hood is used at the same time as appliances burning gas or other fuels (not applicable to appliances that only discharge air back to the room).
7. There is a fire risk if cleaning is not carried out in accordance with the instructions!
8. Do not flame under the range hood
9. CAUTION: Accessible parts may become hot when used with cooking appliances.
10. The Air must not be discharged into a flue that is used for exhausting fumes from appliances brning gas or other fuels.
11. When the range hood is located above gas appliance, this distance shell be at least 65cm
12. Regulations concerning the discharge of air have to be fulfilled.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
14. Never unplug the feed cable from the plug by tugging on the cable. Do not touch the feed cable with wet hands Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
15. Always disconnect the appliance from the supply before assembling, disassembling or cleaning.
16. The user must not leave the device unattended while it is in work.
17. This appliance is only to be used for household purposes and only for the purpose it is made for.
18. This appliance is intended for indoor use only
19. The appliance is not intended to be operated by means of an external timer or a separate remote-control system. Your device must not be used connected to the same power cable or fuse with another device.
20. Only use the appropriate power connection and power socket for this device.
21. Failure to maintain the appliance in a clean condition could lead to damage of the surface that could adversely affect the life of the appliance and possibly result in a hazardous situation. Such damages are not included in the warranty.
22. WARNING: Switch off the appliance before changing accessories or approaching parts which move in use.
23. Steam cleaner is not to be used.
24. The use of accessory attachments, not recommended or sold by the appliance manufacturer, may cause hazards.
    22. Do not use appliance other than for its intended use.

Electrical connection

• Make sure that the voltage (see name plate) and your home power supply match.
• The mains plug should only be inserted into a correctly installed 220-240 V ~ 50 Hz grounded socket.
• Use “Maximum 6A” fuse in the power installation to which the hood is connected both for your own safety and product safety.
• No user-serviceable parts inside. Refer servicing to qualified service personnel.
• Only plug this unit into a properly earthed outlet. If in doubt seek advice from a suitably qualified engineer.
• Failure to follow these instructions can result in death, fire, or electrical shock.

Packing materials

• Keep the packaging materials in places out of reach of the children. Access to the packaging materials by the children may lead to dangerous consequences. Do not allow the children to play with the packaging materials.

INSTALLATION

1. Prepare for installation

• a. If you have an outlet to the outside,your cooker hood can be connected asbelow picture by means of an extraction duct (enamel, aluminum, flexible pipe or inflammable material with an interior diameter of 150mm).
• b. Before installation, turn the unit off and unplug it from the outlet.
• c. The cooker hood should be placed at a distance of 65~75cm above the cooking plane for best effect.

Attention! Observe the warning in the instruction sheet concerning the operation of the appliance when air is discharged from the room.
When the range hood and appliance supplied with energy other than electricity are simultaneously in operation, the negative pressure in the room must be not exceed 4 Pa (4×105 Bar)

Main parts

1. Height-adjustable interior flue
2. Fixed exte rior flue
3. Cabinet
4. Control panel
5. LED Lighting
6. Alu Filter

Installation

Package included

1. Hood
2. Interior flue connection bracket with screws
3. User manual and Installation, Product fiche
4. Assembly Template

Position of the Product:
When installation of the product is completed, there should be a clearance of 60cm between the product and electric ranges and 65 cm between the product and ranges using gas or other fuels. (Figure 3)

WARNING!
Hood should not be connected to air channel where there are other smokes.

1. Drill a hole Ø8 mm (A,B,C,D positions) on the Wall by using the installation template located in the product accessories together with the installation equipment and insert plastic wall plugs into these holes Ø8 mm. (Figure 4)

2. Taking into consideration height of the hood installation site, drill holes Ø6 mm on the wall (E,F positions) for interior flue connection sheet and insert plastic wall plugs Ø6 mm into these holes. (Figure 5)

3. Tighten 2 of 4,8×50 YSB screws in to the wall plugs at the points A and
   B. Make sure there is a clearance of 5 mm between the screw head and wall. (Figure 5)

4. Fix the interior flea connection sheet into the wall plugs Ø6 mm at the points E and F by using the screws 3,9×22 RYSB. (Figure 5)

5. Remove the aluminum filter unit by pressing on the spring latch at the end. (Figure 6).

6. Hang the hood by engaging it with the screws through the suspension holes at A and B where there is a 5-mm clearance of between the screw heads and wall.
   Fix the product by tightening other screws 4,8×50 YSB into the plastic wall plugs in the holes C and D visible from the inner part of the product.
   (Figure 7)
   Connection to external air outlet:
   If your hood works with internal circulation, ignore steps 7-8 .
   To install Carbon filters for indoor circulation, please refere chepter: “MAINTENANCE- Annual Change for Activated Carbon Filter”

7. If the chimney outlet diameter of your product is 150mm and the diameter of the aluminum pipe you will use is 120mm, attach the chimney connection adapter to the chimney outlet before installing the aluminum pipe. (Figure 8)

8. Connect the hood with the aluminum pipe. Pass the flexible aluminum pipe into the plastic flue and fix it by using the plastic cable holder or clamp without overtightening. Insert other end of the pipe into the flue hole on the wall. (Figures 9- 10)

Prior to connecting the hood with the pipe, you should control the plastic flaps at the product air exit point. Before making the pipe connection, operate the hood and make sure the flaps move upwards correctly and allow air exit. Otherwise, change direction of the flaps. (Figure 11)

Overtightening of the cable holder or clamp when making pipe connection may prevent operation of the flaps. Prior to connecting the pipe with the chimney of your house, you, therefore, control whether the hood operates properly by operating it.

9. Insert the interior flue into the exterior flue carefully.

10. Pull the interior flue upwards through the exterior flue and fix it with the screw 3,5×6,5 RYSB on the interior flue connection sheet, which you had screwed on the wall previously. (Figure 12)

11. Fix the exterior flue on the flue mounting lugs located on the upper surface of the hood (2 pieces, right-left) by using the screws 3,5×6,5 RYSB. (Figure 13)

To use the hood efficiently:
When connecting the hood with the flue, use pipe in diameter of 120 mm and minimum number of bends as far as possible. As the bends and elbows on the aluminum pipe will cause reduction in the air suction power, you should avoid use of much bends and elbows as far as possible.
Give heed to regular use of the aluminum cartridge filters and replacement times of the carbon filters (if you use your hood in inner circulation mode ).

WARNINGS:
Prioor to operating the hood, make sure all mechanical and electrical connections are completed!
Do not leave any material inside the hood. Make sure there is no packaging material arround it, remove blue protection band at the edges of the washable aluminum cartridge filter. Please note that if this protective band is not removed, it poses brning risk as it is not of inflammable character.

OPERATION

Mechanic Button Control

O Off button

It’s used for turning off the fan.

1 Low Speed button

It’s used for Ventilation on the kitchen. It is suitable for simmering and cooking which do not make much steam.

2 Medium Speed button

Airflow speed is ideally for ventilation in standard cooking operation.

3 High Speed button

When high density of smoke or steam produced, press high-speed button for highest effective ventilation.

Light button

NOTE: If Low / Medium/ High speed buttons are press at the same time, the unit will only operate at the highest speed

MAINTENANCE

Before any maintenance or start to cleaning switch the unit off and disconnect unit from mian supply!

Regular Cleaning
Use a soft cloth moistened with hand-warm mildly soapy water or household cleaning detergent. Never use metal pads, chemical, abrasive material or stiff brush to clean the unit.
Grease Filter Monthly Cleaning
WARNING: Clean the filter every month to prevent any risk of fire.
The filter collects grease, smoke and dust.
The filter is directly connected with efficiency of the cooker hood. If not cleaned, the grease residue (potential flammable) will saturate on the filter. Clean it with household cleaning detergent.

Aluminum cartridge filter should be washed one in several months (after each 40 operating hours in average) depending on frequency of use with hot soapy water or, if possible, individually in the dishwashing machine (maximum 60°C).
After washing, aluminum cartridge filter and its frame may discolour. This is normal and does not affect function of the filters
Remove the aluminum cartridge filter by pushing the spring catch at the end.
After cleaning, allow it to dry. Do not put in un place before it gets dry Aluminum cartridge filters are washable in the dishwashing machines.

Annual Change for Activated Carbon Filter (model: CHO-CP100T)

Apply to unit that installed internal air circulation (not vented to the outside).
This filter traps odours and must be replaced at least once a year depending on how frequent the cooker hood used.

To prurchaise a new Carbon Filter (CHO-CP100T), contact your dealer or Service centre.
Light Bulb replacement

WARNING
If the supply LED bulb is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Hood is equipped with a LED-based lighting system.
When LEDs are compared with ideal lighting and normal lamps, they provide a service time 10 times longer, with energy savings up to 90%.
If you encounter any physical deformation of the lamp of the hood or any problem with its lighting, please contact with the authorized service centre.

Technical specifications

• ILCOS D code: DBR-1-H (ILCOS d code as per standard IEC 61231)
• LED module – semi-transparent plastic
• Rated power of each lamp: 1W
• Maximum lamp potential power for replacement: 2 x 1W
• Voltage range of the lamp: 220 – 240V
• Product sizes: diameter: 35,8 mm / height: 30 mm

If required, you may acquire new lamps from the authorized service centre.

Prior to replacement of the lamps, remove power cable of the hood. And then lift the front glass upward and remove the aluminum cartridge filter. Afterwards:

1. Disconnect the female and male connectors of the lamps by pushing back part of the plastic lug as shown in the figure at left here to release the locking mechanism (Figure 14).
2. Hold the lamp at its body and rotate 2 retaining lugs on the lamp clockwise or anticlockwise to match with the gaps on the lighting panel. After bringing the retaining lugs to align with the gaps, hold the lamp at its body and bring it out (Figure 15)

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after- sale service department if the issues are not settled!

and repair by The motor is damaged. qualified service personnel only
The motor is damaged

Both light and fan do not work

| The light bulb burned| Replace the bulb with correct rating
Power cord looses| Plug in to the power supply again.

Serious Vibration of the unit

| The fan blade is damaged.| Switch of the unit and repair by qualified service personnel only.
The fan motor is not fixed tightly.| Switch of the unit and repair by qualified service personnel only
The unit is not hung properly on the bracket| Take down the unit and check whether the bracket is in proper

location.

Suction performance not good| Too long distance between the unit and the cooking plane| Readjust the distance to 65- 75cm

TRANSPORT AND SERVICE
WARNING: Handling and transportation. It is required to perform transportation of device in its own original box. Metal, Plastic or Glass parts may be broken during Incorrect packaging. Its electrical parts may be damaged.
Unplug It while It is operating for transport, maintenance or repair purposes.

TECHNICAL SPECIFICATIONS

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

To protect our environment and to recycle the raw materials used as completely as possible, the consumer is asked to return unserviceable equipment to the public collection system for electrical and electronic. The symbol of the crossed indicates that this product must be returned to the collection point for electronic waste to feed it by recycling the best possible raw material recycling.
By ensuring this product you will prevent possible negative effects on the environment and human health, which could otherwise be caused due to improper disposal of that product. The recycling of materials from this product, you will help to preserve a healthy environment and natural resources.
For detailed information about the collection of EE products contact the dealer where you purchased the product.

EU DECLARATON OF CONFORMITY

This device is manufactured in accordance with the applicable European standards and in accordance with all applicable Directives and Regulations.
EU declaration of conformity can be downloaded from the following link: www.msan.hr/dokumentacijaartikala

References

• Elektrootpad
• M SAN Grupa - download dokumentacije artikala
• Naslovnica - VIVAX

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>