ROUGH COUNTRY Toyota 2024 Tacoma Ditch Mount Light Bracket Installation Guide
- July 30, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY Toyota 2024 Tacoma Ditch Mount Light Bracket
Product Information
Product Specifications:
- Product Code: 921721000
- Product Name: Toyota 2024 Tacoma Ditch Mount Light Bracket
- Kit Contents:
- 2 LED Light Kit
- Driver Side Bracket x1
- Passenger Side Bracket x1
Product Usage Instructions
- Locate the passenger side light bracket.
- Open the hood of the vehicle. Loosen the top passenger’s side hood hinge mount bolt and remove the lower bolt using a 12mm wrench.
- Install the light bracket mounting slot in between the bolt and the hood hinge, then secure the lower hood hinge bolt.
- Tighten the (2) bolts using a 12mm wrench.
- Install the lights using the supplied hardware in the lighting kit.
- Repeat the installation on the opposite side of the vehicle.
- Connect the supplied wiring harness to the vehicle’s power supply. Adjust the light to the desired position and tighten the bolt using a 12mm wrench.
Frequently Asked Questions
Q: What tools are needed for installation?
A: You will need a 12mm wrench or socket for installation.
Q: What is included in the hardware?
A: The hardware included in the kit consists of bolts, washers, and nuts.
Q: What are the torque specifications for different bolt sizes and grades?
A: The torque specs vary based on bolt size and grade. Refer to the provided table in the manual for specific torque values.
Thank you for choosing Rough Country for all your vehicle needs.
Please read the instructions before beginning installation. Check the kit
hardware against the kit contents shown below. Be sure you have all the needed
parts and know where they go. If a question exists, please call us at
@1-800-222-7023. We will be happy to
answer any questions concerning this product. Check all fasteners for proper
torque. Check to ensure adequate clearance between all components.
Periodically check all hardware for tightness.
Kit Contents
- 2” LED Light Kit x1
- Driver Side Bracket x1
- Pass Side Bracket x1
Tools Needed
12mm Wrench or Socket
Hardware Included
- Bolts x2
- Washers x2
- Nuts x2
Torque Specs
| Size | Grade 5 | Grade 8 | Size | Class 8.8 | Class 10.9 |
|---|---|---|---|---|---|
| 5/16” | 15 ft/lbs | 20ft/lbs | 6MM | 5ft/lbs | 9ft/lbs |
| 3/8” | 30 ft/lbs | 35ft/lbs | 8MM | 18ft/lbs | 23ft/lbs |
| 7/16” | 45 ft/lbs | 60ft/lbs | 10MM | 32ft/lbs | 45ft/lbs |
| 1/2” | 65 ft/lbs | 90ft/lbs | 12MM | 55ft/lbs | 75ft/lbs |
| 9/16” | 95 ft/lbs | 130ft/lbs | 14MM | 85ft/lbs | 120ft/lbs |
| 5/8” | 135ft/lbs | 175ft/lbs | 16MM | 130ft/lbs | 165ft/lbs |
| 3/4” | 185ft/lbs | 280ft/lbs | 18MM | 170ft/lbs | 240ft/lbs |
INSTALLATION INSTRUCTIONS
- Shown in photo 1 is the driver and passengers side light brackets.
- Locate the passenger side light bracket. See Photo 1.
- Open the hood of the vehicle. Loosen the top passenger’s side hood hinge mount bolt. Then remove the lower bolt using a 12mm wrench. See Photo 2.
- Install the light bracket mounting slot in between the bolt and the hood hinge, then secure the lower hood hinge bolt. See Photo 3.
- Tighten the (2) bolts using a 12mm wrench. See Photo 4.
- Install the lights using the supplied hardware in the lighting kit. See Photo 5.
- Repeat the installation on the opposite side of the vehicle.
- Connect the supplied wiring harness to the vehicle’s power supply. Adjust the light to the desired position and tighten the bolt using a 12mm wrench. See Photo 6.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she complies with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyer’s responsibility to comply with all Federal, State, and Local laws governing the sales of any items listed, illustrated, or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.