Flos IC S1 EUR IC S1 Suspension Verre Instruction Manual
- July 27, 2024
- FLOS
Table of Contents
IC S1/S2
Design Michael Anastassiades, 2014
IC S1 EUR IC S1 Suspension Verre
INSTRUCTION FOR CORRECT INSTALLATION AND USE
WARNING!
The safety of this fitting can only be guaranteed if these instructions are
observed, during both installation and use. Please retain these instructions
safety.
REMARKS:
- When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
- The appliance may in no way be modified or tampered with, any modification may compromise safety causing the appliance to become dangerous. FLOS declines all responsibility for products that are modified.
- This appliance must be connected to an efficient grounding system in order to work safely and correctly.
- Should the external trailing cable get damaged,it must be replaced by FLOS or by qualified personnel in order to avoid any danger.
- The symbol marked on the appliance indicates the need to use self-protected bulbs.
- The symbol shown on the device indicates that the product must be thrown out in a different manner than with the urban trashes.
- NB: slowly screw in the diffuser taking care not to force the tightening operation. Excessive tightening may cause difficulties on the dismantling operation, making it necessary to use a tool.
CLEANING INSTRUCTIONS
- Use only a soft cloth to clean the appliance, dampened with water and soap or mild cleanser if needed for resistant dirt.
- Warning: do not use alcohol or other solvents.
Pic.3 EUR NOTE: Select and employ screw anchors which are suited to the surface where the appliance is to be installed.
Fig.7 NB : Slowly screw in the diffuser taking care not to force the tightening operation. Excessive tightening may cause difficulties in the dismantling operation, making it necessary to use a tool.
TECHNICAL DATA
VERSION
| IC S1 EUR | Incandescent halogen bulb MAX 60W, E14 attachment type HSGS. |
|---|---|
| IC S2 EUR | Incandescent halogen bulb MAX 205W, E27 attachment type HSGS. |
| IC S1 USA | Incandescent halogen bulb MAX 75W, G9 attachment type T Shielded. |
| IC S2 USA | Incandescent halogen bulb MAX 150W, E26 attachment type T Shielded. |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>