IPMule IP-TX101 IP Down Co-ax Single Unit User Guide

June 6, 2024
IPMule

IPMule IP-TX101 IP Down Co-ax Single Unit User Guide

IPMule IP-TX101 IP Down Co-ax Single Unit User Guide

www.systemq.com/PDF/manual/xIP-TX101.pdf
The IP-Mules can be used to create a network over coax, alarm or telephone cable. It can be used for IP cameras or other network devices.
Several IP cameras can be sent down the one cable using multiple IP Mules, see the table & diagrams overleaf for the limits on bandwidth and connections.

Connections & Controls

IPMule IP-TX101 IP Down Co-ax Single Unit User Guide - Connections &
Controls

Installation

  1. Set the switch on the IP-TX101 to Master’ for the Mule connected to the network switch or router. Set the switch on the IP-TX101 toSlave’ for the Mule connected to connected to a camera.

  2. Connect the coax cable, CAT5 or other two core cable to the IP-Mules. Multiple IP-Mules can be daisy chained together, connect using either;
    • Coax cable with a BNC T-piece connector
    • CAT5 or other multi core cable with a Zulug BNC adaptor like the CON380

  3. Power the IP-Mules from 12V DC (via the 2.1mm DC Socket), the current consumption is 250mA.

  4. Connection LEDs;
    • Coaxial = Solid LED indicates there is a cable connection between a slave and master IP-Mule.
    • LAN = Flashing LED shows there is an IP device connected.

Connection Diagrams

IPMule IP-TX101 IP Down Co-ax Single Unit User Guide - Connection
Diagrams

Transmission Distances

IPMule IP-TX101 IP Down Co-ax Single Unit User Guide - Transmission
Distances

Specification

IPMule IP-TX101 IP Down Co-ax Single Unit User Guide -
Specification

All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non- performance of the equipment referred to.

Document ref: qIP-TX101
© 2022 Enter your company name

This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated WEE/CG0783SS collection point as defined by your local council.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals