ROCAM C1025 FM and Bluetooth Clock Radio Instructions

ROCAM C1025 FM and Bluetooth Clock Radio Instructions

Package Lists

• 1x Alarm Clock Radio
• 1x Power Cable
• 1x USB Power Adapter
• 1x CR2032 Coin Battery
• 1x User Manual

Installation Notes

1. To ensure that the clock retains its time and alarm settings during a power outage, please pull out the battery insulator on the back of the alarm clock in advance to activate the battery backup function.
   

2. To start using the clock, connect the adapter and the cord to the clock, then plug it into a 100-240V AC wall outlet.
   

NOTE: The adapter is required to keep the clock working

Time Setting

1. Enter the time setting mode, touch the Time button, the hour digit starts flashing, turn the knob to adjust the digital display of the hour.
   

2. Touch the Time button again, the minute digit starts flashing, turn the knob to adjust the digital display of the minute.
   

3. Finally touch the Time button again, the time setting is finished
   

NOTE: When setting the time or alarm clock, the left and right knob functions are the same.

DST Setting

1. To enter DST mode, touch and hold the DST button for 2 seconds, the time will advance by one hour and the DST icon will be displayed.
   

2. To exit DST mode, touch and hold the DST button again for 2 seconds, the time will be adjusted back by one hour and the DST icon will be turned off.
   

Alaram Setting

1. To enter the alarm setting mode, touch and hold the Alarm button for 2 seconds, the hour digit starts flashing, turn the knob to adjust the hour.
   

2. Touch the Alarm button again, the minute digit starts flashing, turn the knob to adjust the minute
   

3. Touch the Alarm button again, then turn the knob to adjust the alarm to ring as a bell or play the last radio channel listened to.
   

4. Touch the Alarm button again, then turn the knob to adjust the volume of the alarm.
   

5. Finally touch the Alarm button again, the alarm setting is finished
   

NOTE: If no next action is taken after 15 seconds of touching the alarm clock button, the alarm clock will exit the settings and return to the main time display screen.

Cancel the Alarm

1. To cancel the alarm, touch the Alarm button, the alarm icon will turn of findicating that the alarm has been canceled.
   

(If you want turn on the alarm again, you can touch the Alarm button again, the alarm icon will light up, indicating that the alarm has been turned on.)

SNOOZE Mode

When the alarm goes off, touch the SNOOZE button, the alarm will stop temporarily and ring again after 9 minutes

NOTE:

1. After the alarm goes off, all buttons and knobs function are the same as SNOOZE, except for the Alarm button which turns off the alarm directly.
2. If there is no operation after the alarm goes off, the alarm will sound for 60 minutes and then stop automatically.

Night Light

Touch the LIGHT button when there is no alarm clock ringing, the night light will turn on, and touch again to turn off.

Dimmer Setting

To set the display brightness, touch the Dimmer button, then touch the Dimmer button again in succession or turn the knob (either side) to adjust the display brightness. (There are a total of 5 brightness levels)

NOTE:

1. When playing radio or Bluetooth music, only by touching Dimmer button continuously or rotating the right knob can adjust the display brightness (the left knob controls the machine volume).
2. When adjusting to the lowest brightness, a low brightness icon will appear to indicate that it is currently the lowest brightness level, and the icon will disappear after 20s of display (after you touch any other button, the icon will be displayed again);

Change 12/24 Hour Time Display Format

To switch the time display format of 12/24 hours, press and hold the 12/24h button for about 2 seconds. In the 12-hour time format, the AM/PM icon will be displayed.

Charging Other Devices

This alarm clock has two ports, USB and Type-C, which are compatible with charging two mobile devices at the same time (charging cable not included), with a maximum charging current of 1A.

Note: Type-C port also supports input, so you can also use the regular Type-C cable as a power cable.

Bluetooth Setting

1. Repeatedly touch the Power Mode button to select to enter the Bluetooth mode, and the Bluetooth icon will start flashing, indicating that it is in Bluetooth ready pairing status.
   

2. Find the Bluetooth of “CR1025” name on the phone, select connect, Bluetooth stop flashing, keep on, and hear the sound from the machine to indicate successful connection. (If you want to switch the connected device, touch the Pair button to re-pair)

3. Turn the right knob to select the song, twist to the left to select the previous music, twist to the right to select the next music.
   

4. Turn the left knob to adjust the volume level, the maximum volume is 16 levels (116dB)
   

NOTE:

1. When connecting Bluetooth to play music, if you feel that the 16-level volume is still too low, it may be that the phone volume is too low, you can turn up the phone volume to achieve the effect of increasing the volume of the machine.
2. When setting the alarm clock in radio or Bluetooth mode, the sound may be delayed in the step of setting the alarm volume, which is a delay in receiving program instructions and is normal.

FM Radio Setting

1. Repeatedly touch the Power Mode button to select to enter the radio mode, the radio icon lights up to indicate that it has been set successfully.
2. Touch the Scan button to open the automatic station search function, the machine will automatically store the frequencies with signals (up to 20 channels
3. Turn the right knob to manually select the channel, when switching to the preferred channel, touch the preset button to manually store the channel.
4. Turn the left knob to adjust the volume level, the highest volume level is 16 levels (116dB).

Specifications

Product Size: 6.61×3.31×2.32inches
Product Weight: 0.47 Ibs
Material: ABS + Fabric
Control Method: Touch Buttons + Knobs
FM Radio Frequency: 87.5-108.00 MHz
Bluetooth: Bluetooth 5.0
Power Cord: USB – DC 5V Power Charging Cable  (Cable Model: 5521)

Power Supply

Adapter Input: AC 100-240V
Adapter Output: DC5VI2A
Power Input: DC5V
Type-C Port Input/Output : DC5V/I1A
USB Port Charge Output: DC5VI1A
Backup Battery: 1*CR2032 (Included)

FCC Statement
Changes or modifications not expressly approved by the pary responsible for compliance could void the user’s authorty 1o operate the equipment. This equipment has been tested and found to ‘comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These. fimits are designed!o provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can  radiate radio frequency energy and, if not installed ang used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur n a particular installation. I tis equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged 1o ry to correct the interference by one of more of the following measures.

• Reorientor relocate the receiving antenna.
• increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diflerent from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 ofthe FCC rules. Operation is subjectto the following two conditions (1)this device may notcause harmful interference, and (2) this device must accept any interference received, incluging interference that may cause undesired operation

Tnis equipment complies with FCC radiaton exposure fmits setforth foran uncontroled environment s equipment should be nstaled and operated with miimum distance 20em between the radator & your body.

Email: support@yelaw.net _https://www.yelaw.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>