FLOS Skynest Suspension Pendant Lamp Instruction Manual
- October 30, 2023
- FLOS
Table of Contents
FLOS Skynest Suspension Pendant Lamp
INSTRUCTION FOR CORRECT INSTALLATION AND USE
WARNING!
The safety of this fitting can only be guaranteed if these instructions are
observed, during both installation and use. Please retain these instructions
safely.
REMARKS
- When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
- The appliance may in no way be modified or tampered with. Any modification may compromise safety and make the appliance itself dangerous. FLOS declines all responsibility for products that are modified.
- This appliance must be connected to an efficient grounding system in order to work safely and correctly.
- The device carries no risk of photobiological emissions.
- The light source cannot be replaced by the customer. Contact FLOS for information.
- Should the external trailing cable get damaged, it must be replaced by FLOS or by qualified personnel in order to avoid any danger.
- The symbol shown on the device indicates that the product must be disposed of in a different manner than the urban waste.
TECHNICAL DATA 78W LED
CLEANING INSTRUCTIONS
- Use only a soft cloth to clean the appliance, dampened with water and soap, or mild cleanser if needed for resistant dirt.
- Warning: do not use alcohol or other solvents.
Pic.2E EUR NOTE: Select and employ screw anchors which are suited to the surface where the appliance is to be installed.
| VERSION | Assembly Sequence |
|---|---|
| EUR | Fig.1 – 2E – 3 – 4 – 5 – 6 – 7 – 8 – 9 |
| USA | Fig.1 – 2U – 3 – 4 – 5 – 6 – 7 – 8 – 9 |
WIRING
- BLACK to BLACK (L) WHITE to WHITE (N) GREEN to EARTH
INSTALLATION INSTRUCTIONS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>