National Guard Products Nylon Brush Perimeter Seals Instructions
- July 26, 2024
- National Guard Products
Table of Contents
National Guard Products Nylon Brush Perimeter Seals Instructions
Installation Instructions
-
Remove brush from metal retainer.
-
Cut brush to fit opening, using the cutting section of pliers or diagonal cutters.
If bristles are not secure, use a drop of adhesive to secure the brush. -
Cut the metal retainer to length.
-
Replace brush in metal retainer.
-
With door closed, position seal and mark screw holes.
-
Drill pilot holes for screws with a 7/64″ bit.
-
Install with screws provided.
-
Slightly peen the bottom end of each retainer to secure the brush from moving.
-
Adjust position so brush is touching against door, but does not impede proper closing and latching of door.
600, 602, A605, B606, A617, A625, A626, 672, 675, 706, 706E, 9000, 9600, 9605, 9675, 9706E
POSITIVE PRESSURE TESTED GASKETING MATERIALS FOR FIRE DOORS
FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS
RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS
RATED UP TO 1-1/2 HOURS.
CATEGORY H
601, 603, C607, D608, G610, H612, C619, F625, OV633, OV634, D648
POSITIVE PRESSURE TESTED GASKETING MATERIALS FOR FIRE DOORS
FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS
RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS
RATED UP TO 1-1/2 HOURS.
CATEGORY J
D620, G622, H623, I624
POSITIVE PRESSURE TESTED GASKETING MATERIALS FOR FIRE DOORS
FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS
RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS
RATED UP TO 1 HOUR.
CATEGORY J