National Guard Products 706E Nylon Brush Perimeter Seals Instruction Manual
- July 25, 2024
- National Guard Products
Table of Contents
National Guard Products 706E Nylon Brush Perimeter Seals
Specifications
- Product Name: Nylon Brush Perimeter Seals
- Manufacturer: National Guard Products Inc.
- Contact: 1-800-647-7874
- Materials: Nylon brush, metal retainer
- Application: Fire doors rated up to 3 hours for metal-type doors and up to 1-1/2 hours for wood-type doors
- Category: H
FAQs
- Q: What type of doors is this product suitable for?
- A: The Nylon Brush Perimeter Seals are suitable for hollow-metal-type fire doors rated up to 3 hours and wood-type fire doors rated up to 1-1/2 hours.
- Q: How do I secure the brush if the bristles are not staying in place?
- A: If bristles are not secure, you can use a drop of adhesive to secure the brush in place.
- Q: What size drill bit should I use for drilling pilot holes?
- A: Use a 7/64 bit to drill pilot holes for screws.
Installation Instructions
- Remove the brush from a metal retainer.
- Cut brush to fit the opening, using the cutting section of pliers or diagonal cutters. If bristles are not secure, use a drop of adhesive to secure the brush.
- Cut the metal retainer to length.
- Replace the brush in the metal retainer.
- With the door closed, position the seal and mark screw holes.
- Drill pilot holes for screws with a 7/64″ bit.
- Install with screws provided.
- Slightly peen the bottom end of each retainer to secure the brush from moving.
- Adjust the position so the brush is touching against the door, but does not impede proper closing and latching of door.
MORE INFO
- 600, 602, A605, B606, A617, A625, A626, 672, 675, 706, 706E, 9000, 9600, 9605, 9675, 9706E
- POSITIVE PRESSURE-TESTED GASKETING MATERIALS FOR FIRE DOORS
- FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS RATED UP TO 1-1/2 HOURS. CATEGORY H
- Smoke and Draft Control door bottom (Category H) tested to UL 1784; meets requirements of NFPA 105, IBC for use on “S” label doors. Applies to the following models: 600, 602, A605, B606, A617, A625, A626, 672, 675, 706, 706E, 9000, 9600, 9605, 9675, 9706E
- 601, 603, C607, D608, G610, H612, C619, F625, OV633, OV634, D648
- POSITIVE PRESSURE-TESTED GASKETING MATERIALS FOR FIRE DOORS
- FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS RATED UP TO 1-1/2 HOURS. CATEGORY J
- D620, G622, H623, I624
- POSITIVE PRESSURE-TESTED GASKETING MATERIALS FOR FIRE DOORS
- FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS
- RATED UP TO 3 HOURS AND WOOD-TYPE FIRE DOORS RATED UP TO 1 HOUR. CATEGORY J
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>