ULTIMEA Solo B30 Pro Detachable Ultra Slim and Dolby Atmos Soundbars User Manual

ULTIMEA Solo B30 Pro Detachable Ultra Slim and Dolby Atoms Soundbars User Manual

ACCESSORIES LIST

INDICATOR LIGHT DESCRIPTION

Power on : Green light flashes for 3 seconds, then displays the indicator light of the current channel.
Power off : Green light flashes for 3 seconds, then red light stays on.
OPT channel : Shows purple light.
Bluetooth channel: Shows blue light.
AUX channel: Shows green light.
Insert USB flash drive, select USB channel: Shows orange light.
No USB flash drive inserted, select USB channel: Orange light flashes.
OTA upgrade : Red light flashes.

INTERFACE INTRODUCTION

1. DC IN: Used for power input.
2. AUX: Used for receiving AUX signal input.
3. OPTICAL: Used for receiving OPTICAL signal input.
4. USB : Used for inserting USB to input signal.
5. SUB OUT : Used for connecting to a powered subwoofer. (Reserved interface; this product does not include a separate subwoofer)

SOUNDBAR CONTROLS

Control Panel

1. “” : Power Button
   Press to power on/off.

2. “ “: Source
   Press to switch channels: OPT(OPTICAL)-BT-AUX-USB.

3. “ “: Bluetooth
   Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC/TV (BT ID: Solo B30 Pro).

4. “-“: Volume Down

5. “+”: Volume Up

Remote Control

1. Power Button
   Press to power on/off.

2. INPUT
   Press to switch channels: OPT(OPTICAL)-BT-AUX-USB.

3. BT
   Press to switch to BT channel and enter paring mode. The indicator light will turn blue, Hold for 3 seconds to disconnect cument device and choose to connect to a new device manually on your mobile phone/PC/TV (BT ID: Solo 830 Pro).

4. “ OPT
   Press to switch to OPTICAL channel.

5. AUX
   Press to switch to AUX channel.

6. LED DIMMER
   Press to adjust display brightness in 5 levels. Press and hold for 3s to turn off the display.

7. USB
   Press to switch to USB channel.

8. • Volume Up

9. Volume Down

10. < Previous
    For BT and USB mode only. Skip to previous track.

11. Next
    For BT and USB mode only: Skip to next track

12. “ ” Play/Pause
    For BT and USB mode only.

13. MOVIE
    Press to switch to MOVIE mode.

14. GAME GAME
    Press to switch to GAME mode.

15. MUSIC
    Press to switch to MUSIC made.

16. BASS MY:
    BASSMX Press to adjust bass level

17. “Mute/Recover the volume.

CONNECT TO TV VIA OPTICAL/AUX

**OPTION 1: OPTICAL

**

1. Make sure the TV’s port is OPTICAL OUT, connect both sides. of the cable to OPTICAL, for both the TV and the sound bar,
2. Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical, Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume

**OPTION 2: AUX

**

1. Connect the 3.5mm to 3.5mm audio cable to connect to your TV’s AUX port.

Note: Please remember to unplug the AUX cable from TV and Sound bar when you want to switch other mode.

In Optical Mode : If there is no sound, try setting the TV audio output to PCM: TV Selinga Home Settings Sound Digital Audio Output PCM

CONNECT TO BLUETOOTH

1. Press the”  ” button on the sound bar or remote control to enter Bluetooth pairing mode.
2. Open your phone’s Bluetooth settings, find and select “Solo B30 Pro” to connect the sound bar.

Note: If it’s already in the Bluetooth mode and connected, press and hold” ” button for 3 seconds to disconnect the current device and connect to new device manually on your mobile phone/PC/TV.

WALL MOUNT INSTALLATION

SAFETY INSTRUCTIONS

Please read this user manual carefully and save it for future reference.
Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

• Avoid dropping,
• Do not disassemble.
• Do not submerge in water
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g.liquid filled objects, lit candles).
• Clean with a diry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
• The adapter should be installed near the device and should be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

PROPER DISPOSAL INSTRUCTIONS

This mark shown on the product or its packaging, indicates that this product should not be disposed of with other household waste at the end of its working lile.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment

Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC REGULATORY COMPLIANCE

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation,

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, These Imits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving anterina.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected,
• Consult the dealer or an experienced radio/TV technician for help.
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Declaration of Conformity

We (Manufacturer is responsible for this declaration)
Ultima Technology (Shenzhen) Limited
(Company name)
20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000
(Company address)
Declare under our sole responsibility that the product
Trade Mark: ULTIMEA
Product Name : Solo B30 Pro 2.1 Channel with Bulid-in Subwoofer
Model No.: U2201
To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/ 65/EU) product is responsible to affix CE marking, the following standards were applied:

Trade Marks:

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ultima Technology (Shenzhen) Limited is under license. Other trademarks and trade names are those of their respective owners.

WE ARE READY TO HELP

support@ultimea.com
support.ultimea.com

Scan code to download app

You can also search for “ULTIMEA” on Google Play or Apple Store to download the app.

1 888-598-8875 (US) +49 89-628-25828 (EU) Mon-Fri 9am-5pm (PST)
Mon-Fri 9am-5pm (CET

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>