ULTIMEA U2600S Poseidon D70 7.1 Channel Virtual Surround Soundbar User Manual

ULTIMEA U2600S Poseidon D70 7.1 Channel Virtual Surround Soundbar

WE ARE READY TO HELP

support@ultimea.com
support.ultimea.com

Scan code to download app
You can also search for “UL TIMEA” on Google Play or Apple Store to download the app .

@ultimea_official
Tel:+1 888-598-8875 (US)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (PST)
Mon-Fri 9am-5pm (CET)

ACCESSORIES LIST

SOUNDBAR CONTROL

Control Panel

1. “ “: Power Button
   Press to power on I off.

2. ” “: Source
   Press to switch channels: ARC-OPT(OPTICAL)-BT-AUX-USB.

3.  “ “: Bluetooth
   Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Poseidon D70).

4.  ” – “: Volume Down

5. “+”: Volume Up

Remote Control

• 1″ ” : Power Button
  Press to power on / off.

• 2 “ “: SOURCE
  Press to switch channel: ARC-OPT-BT-AUX-USB

• 3  “ “:ARC
  Press to switch to HDMI ARC channel.

• 4  “ “: OPT
  Press to switch to OPTICAL channel.

• 5  “ “:AUX
  Press to switch to AUX channel.

• 6 “ “:BT
  Press to switch to BLUETOOTH channel.

• 7  “ “:USB
  Press to switch to USB channel.

• 8   “ “: SUB PAIR
  Press and hold the button for 3 seconds to put the Soundbar in a state ready to pair with the subwoofer_

• 9   “ “: USBREPEAT
  USB Mode: Press to switch between single loop playback and list loop playback.

• 10 “+ “: Volume Up

• 11 “-“: Volume Down

• 12 ” < “: Previous
  For BT and USB mode only: Skip to previous track.

• 13  “>”: Next
  For BT and USB mode only: Skip to next track.

• 14  “ “: Play/ Pause
  For BT and USB mode only.

• 15  “ “:MUTE

• 16 ” “: LED DIMMER
  Press to adjust display brightness in 5 levels. Press and hold for 3s to turn off the LED display.

CONNECT TO TV VIA HDMI ARC

Note: Please turn on the “CEC” function on your TV.
When ARC is connected, your TV remote control can control the soundbar and TV simultaneously:

1. Turn on/off
2. Adjust the volume

If there Is no sound: try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO TV VIA OPTICAL/AUX

1. Make sure the TV’s port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
2. Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical.

Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume.

1. Connect the 3.5mm to RCA audio cable to connect to your TV’s RCA AUDIO OUT port.
2. Make sure the color of the cables ends matches the color of the TV ports.

Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch other mode.
In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output> PCM

CONNECT TO BLUETOOTH

1. Press the ” ” button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Open your phone’s Bluetooth settings, find and select “Poseidon D70” to connect the soundbar.

Note: If it’s already in the Bluetooth mode and connected, press and hold ” ” button for 3 seconds to disconnect the current device and connect to new device manually on your mobile phone / PC / TV.

CONNECT SURROUND SPEAKERS TO SOUNDBAR AND SUBWOOFER

1. Use the Front Surround Cables (FL & FR) to connect the soundbar and surround speakers, please pay attention to match the same color interfaces on the surround speakers
   with the corresponding ones on the soundbar and place the surround speakers accordingly.

2. Use the Rear Surround Cables (SL & SR) to connect the subwoofer and surround speakers, please pay attention to match the same color interfaces on the surround speakers with the corresponding ones on the subwoofer and place the surround speakers accordingly.

Note: After connecting the surround speakers in the manner described above, when facing the front of the sound bar, the two surround satellite speakers on the right side will have red interfaces, while the two surround satellite speakers on the left side will have white  interfaces. Please ensure that they are positioned accordingly to ensure an optimal audio experience.

PAIRING SUBWOOFER

The subwoofer has been paired with the soundbar by factory. If there is no sound coming from the subwoofer, you need to repair the soundbar with the subwoofer.

Step 1:
Press and hold the “SUB PAIR” button on the remote control for 3 seconds, the display will show “SU]” flashing.

Step 2:
Press and hold the ON / OFF button on subwoofer for 5 seconds, the while LED will be fast flashing.
The white LED will be always on when the subwoofer is paired successfully.

PLACEMENT RECOMMENDATION

For a better listening experience, lay out the entire system as shown in the picture above.

WALL MOUNT INSTALLATION

Note: The wall mount bracket used for the surround speakers is identical to that of the sound speaker, so the vertical hole spacing is the same as that of the soundbar, and the installation method is also the same.

SPECIFICATIONS

SAFETY INSTRUCTIONS

Please read this user manual carefully and save it for future reference.
Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g.liquid filled objects, lit candles).
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 41 °F/5°C and 95°F/35°C.
• The adapter should be installed near the device and should be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

PROPER DISPOSAL INSTRUCTION

This mark shown on the product or its packaging, indicates that this product should not be disposed of with other household waste at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED WARNINGS
This device contains licence-exempt transmitter (s) / receiver (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS (s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and ompliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Declaration of Conformity

We (Manufacturer is responsible for this declaration) Ultimea Technology (Shenzhen) Limited (Company name)
20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000
(Company address)
Declare under our sole responsibility that the product
Trade Mark: UL TIMEA
Product Name: Poseidon D70 7 .1 Channel Virtual Surround Sound bar
Model No.: U2600
To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/ 65/EU) product is responsible to affix CE marking, the following standards were applied:
EN 55032:2015/A1:2020
EN 55035:2017/A 11 :2020
EN !EC 61000-3-2:2019/A1:2021
EN 61000-3-3:2013/A2:2021
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.4 (2020-09)
ETSI EN 300 328 V2.2.2 (2019-07)
EN 50663: 2017
EN !EC 62368-1 :2020+A 11 :2020
IEC 62321-3-1:2013
IEC 62321-4:2013+A1:2017
IEC 62321-5:2013
IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
IEC 62321-8:2017
Full Name: Yoyo.Yu
Position: Approbation Manager
Signature:
Place/Date: Shenzhen, China / May. 6-2024
Trade Marks:

Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Soundlab Technology Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners.

HDMI
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Poseidon D70 7 .1 Channel Virtual Surround Sound bar Model No.: U2600

EC/REP
Ultimea GmbH
Buchenring 57, 22359 Hamburg, Germany

UK/REP
UK CROSSBORDER LIMITED
7 Bell Yard London WC2A 2JR, UK United Kingdom
Made in China
Manufacturer: Ultimea Technology (Shenzhen) Limited Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China 518000

If you need our support, kindly reach out to our service team. We are always glad to help.
Tel: +1 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)

Email: support@ultimea.com
support.ultimea.com

@ultimea_official

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>