ULTIMEA U3300 Apollo S40 Twin Subwoofer User Manual

ULTIMEA U3300 Apollo S40 Twin Subwoofer

• Twin Subwoofer Powered in One Detachable Design
• www.ultimea.com

Accessories list

Interface

Control Panel

1. VOL+: Volume Up.
2. VOL- : Volume Down.
3. SOURCE: Press to switch channel: ARC-BT-Optical-AUX-USB. Press for 3 seconds to switch to BT mode, and enter pairing mode.
4. Power Button: Press to power on Press for 3 seconds to power off.

LED Display

Rear Panel

Remote Control

Installation Option 1&2

Installation Option 3&4

Wall mounted

Wall Mount Installation

Assembly steps

Detached and stand on base

Wall mounting

Connect to TV

Connect to other devices

Power supply

Turn On/Off

1. The power adapter jack is connected to the soundbar DC in port, and then plugged into the power port.
2. Check whether the indicator light (white “ – ” on the LED diplay) of the sound bar is on, if not, you need to press the power button on the side.
3. The remote can also control the soundbar with the battery installed.

NOTES for TV settings:
Please make sure that the TV audio output format is set to PCM when connecting via HDMI or Optical Mode, in case there is no sound, see opration procedure as bleow:

Connecting via Bluetooth

Bluetooth Connection

• Press and hold the “SOURCE” button for 3s to enter Bluetooth pairing mode. Find and click the device name “ULTIMEA Apollo S40” to connect.

Specifications

General Specifications

• Model No.: U3300
• Power supply: 100-240V AC, -50/60Hz
• Total Speaker power output: (Max.@THD1%): 40W
• Soundbar Transducer: 2.25 X2(Mid-low range) +2.25 X2(Mid-high range)
• requency Response: 60Hz-18kHz
• Standby power: <0.5W
• Operating performance: 0C-45 C

Port Specifications

• HDMI ARC: 1.4A
• USB: Type A, Supports MP3, APE, FLAC, WMA, and maximum 64GB memory
• Rating: 5V,0.5A; Supports file
• Format: MP3.
• Other inputs: optical input X1, AUX inputX1

Bluetooth specifications

• Bluetooth version: 5.0
• Bluetooth profile: A2DP V1.3, AVRCP 1.5
• Bluetooth frequency range: 2402-2480MHz
• Bluetooth transmitter power: <8 dBm (EIRP)

Dimensions

• Dimensions (Wx Hx D): 803mm x 78mmx 65 mm/31.6″ x 3.1″x 2.6″
• Weight: 2.5 Kg
• Packaging dimensions (W x H x D): 440mm x 156mm x 270mm/ 17.3″ x 6.1″ x 10.6″
• Packaging weight (Gross weight): 3.5 Kg

Troubleshooting

There is no Power

• Press the POWER button on the remote control or on the right of your sound bar.
• Ensure the power cord is securely connected.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.

There is no sound

• Increase the volume. Press VOLUME UP on the remote control or on the top of your sound bar.
• Press MUTE on the remote to ensure the sound bar is not muted.
• Press INPUT on the remote or on the top of your sound bar to select a different input source.
• When using the Digital Optical input, if there is no audio:
  • (A) try to set the TV output to PCM or
  • (B) connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
• On digital inputs, the LED display will flash “—-” rapidly if an unsupported format is present, please set the source to output PCM.

There is buzzing or humming noise|

•may be with the or

---|---
The remote doesn’t work| •   Replace the remote batteries wi th new one s.

•   Point the remote directl y at the center o f the sound bar when pressing a button.

•   If the dista nce bet ween the remote contro l and the main unit is too far, move it closer to the uni t.

•   If using a Bluetooth conne cti on, some of the buttons on the remote may not be suppor ted by the streaming application.

Bluetooth Connect Failed

|

•   The soundbar is alread y conne cted with another B luetooth device, disconnec t the previously connec ted devic e.

•   Rebo ot your Bluetooth device and try to pair again with the soundbar .

The connected Bluetooth| The Bluetooth recept ion is poor.
device connects and|
disconnects nects| •   Remove any obstacle bet ween your Bluetooth device and the soundbar .
constantly.|
Can I use bluetooth headphones with sound bar?|

No, it’s cannot outp ut Blu etooth sign al to your headphone s.

I connected optical cable to Samsung TV, why do I get only loud static? no TV sound… just static?

|

•  Please check that all cabling is connected/inserted correctly;

•   Make sure the audio format setting on your TV is set to PCM and the correct audio input mode has been selected.

Safety Instructions

Please read this user manual carefully and save it for future reference.

• Please read this user manual carefully and save it for future reference.
• Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g. liquid filled objects, lit candles).
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
• The adapter should be installed near the device and should be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

Proper Disposal Instructions

This mark shown on the product or its packaging, indicats that this product should not be disposed with other household wates at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item tor environnmentally safe recyclin9 Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC Regulatory Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance With the instructions, may cause harmtu interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. ir this equipment does cause harmtul interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation befween the equipment and receiver.
• Connect tne equipment into an Outiet on a circuit aierent rom tnat to wnicn tne recelver s connected.
• Consult the dealer or an experienced radio/IV technician for
• Changes or modifications not expressly approved by the party responsible for complance could vold the user s authority to Operare tne equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and.
2. this devIce must accept any interference recelved, including interference that may cause undesired operation. fhis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Ihis equipment should be inställed and operated with a minimum distance or 20cm between the radiator & your body. This transmit ter must not be co located or operating in onjunction with any other antenna or transmitter.

ISED WARNINGS

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Declaration of Conformity

We (Manufacturer is responsible for this declaration) Dynanic (Shenzhen) Technology Limited (Company name) 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China 518000 (Company address) declare under our sole responsibility that the product Trade name: ULTIMEA Equipment: SOUNBAR Model No.: U3300 to which this declaration relates is in conformity with the essential requirement set Out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive(2014/53/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:

• EN55032:2015
• EN61000-3-2:2014
• EN61000-3-3:2013
• EN55024:2010+A1:2015
• Draft EN 301 489-1 V2.2.0
• Draft EN 301 489-17 v3.2.0
• EN300 328 V2.1.1
• EN62479:2010
• EN60065:2014+A11:2017
• IEC62321-3-1:2013
• IEC62321-4:2013
• EC62321-5:2013
• EC62321-6:2015
• IEC62321-7-1:2015
• IEC62321-7-2:2017
• EC62321-8:2017
• Full Name: Yoyo.Yu
• Position: Approbation Manager
• Signature: 7LrNaA9 Place/Date: Shenzhen,China/Sep.26-2022

Model Number: U3300
7 Bell Yard London Wc2A 2JR, UK United Kingdom Made in China

• Manufacturer: Dynanic (Shenzhen) Technology Limited
• Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St. Longgang District, Shenzhen, China 518000
• FCC ID: 2A900-U3300S
• IC: 29805-U3300S

Dynanic Inc. All rights reserved, registered in the United States and other countries 16192 Coastal Hwy Lewes DE 19958, United States We hope you never have the need, but if you do, our service is friendly and hassle-free as below.

• +1 888-598-8875 (US)
• Mon-Fri 9am-5pm (PST)
• +49 89-628-25828 (EU)
• Mon-Fri 9am-5pm (CET)
• support@ultimea.com
• support.ultimea.com @ultimea_official

References

• Ultimea ­– Affordable Soundbars, Projectors and Home Audio Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>