ULTIMEA U0342 Apollo P60 Projector User Manual
- June 1, 2024
- ULTIMEA
Table of Contents
USER
MANUAL
Apollo P60 Projector
SMART AS YOUR CHOICE
Model No.:U0342
Accessories List
Product
Remote Control
LED
Indication
| LED Status | Description |
|---|---|
| Steady Blue | Powered On |
| Steady Red | Standby Mode |
| Light Off | Powered Of |
Get Started
Prepare the Remote Control
- Open the battery holder cover of the remote control.
- Install two AAA batteries. Make sure to match the polarity (+/-) indicated and put back the cover.
- Please refer to the on-screen instructions to pair the remote control with Apollo P10.
- The distance between the remote and the project or should not exceed 10m/33 ft.
Power On/Off
Inserting the power plug using the provided adapter.
Press the power button or remote control power button once to power on.
Press the power button or remote control power button twice to power off. Plug
the power cord into an outlet. Press the power button to turn on the
projector.
Placement
- Place Apollo P10 on a stable,flat surface in front of the projection surface
- Please adjust the distance between Apollo P10 and the projection surface to get the desired projection image.
Projection Distance and Projection Image Size
| Proiection Image Size (inch) | Distance(m) | Distance (ft) |
|---|---|---|
| 60 | 1.8 | 5.91 |
| 70 | 2.1 | 6.89 |
| 80 | 2.4 | 7.87 |
| 90 | 2.7 | 8.86 |
| 100 | 3 | 9.84 |
| 110 | 3.3 | 10.83 |
| 120 | 3.6 | 11.81 |
Tips: The projection image size refers to the distance of the diagonal of the imagesize instead of the length of the imagesize.
Focus Manual
Press (F+)()or F-on the remote control to manually adjust the focus.Please
carefully observe the focus icon until get a clear image.
Keystone Correction
When positioning your projector in a fixed location,use manual keystone
correction.Press the keystone correction button to enter the Adjust menu and
make vertical adjustments.
Keystone Correction Reset
To restore the default setings,press the button to go to enter the Adjust
menu,select [Reset]and comfirm.
Zoom in/out
Press Select window zoom]on the Option menu to adjust the screen size.
Projection Settings
Press ,select [Flip] on the Option menu,and select the
projection direction.
Screen Mirroring
Wireless Screen Mirroring
- Open to enter the interface.
- Follow the Ul prompts to connect different devices.
Wired Screen Mirroring
- Open to enter the interface.
- Follow the Ul prompts to connect different devices.
In-
app Screen Mirroring
- Open to enter the interface.
- Make sure that the projector and devices are connect- ed to the same wifi,and follow the Ul prompts to use in-app screen mirroring.
Note: Due to HDCP copyright,the projector doesn’t support cast Netflix or YouTube content directly.
Wired Connections
Play froman HDMI Playback Device
This Apollo P10 supports connections with various HDMI playback devices
such as PC,TV stick,TV box,DVD player,set-top box (STB),game console or other
devices.
- Connect this projector to an HDMl playback device with an HDMI cable.
- Press the Souce button on the remote control, on the remote control,
Play from USB Storage Device
With Apollo P10,you can enjoy music,video,and pictures,or install apps that
are stored on a USB storage device.
Insert the USB storage device,select the type you want to play on the
homepage,select and confirm the file you plan to play.
Play Through External Sound Devices Via AUX Cable
- Connect one end of the 3.5mm AUX cable to the AUX port on this projector.
- Connect the other end of the 3.5mm AUX cable to the AUX port on headphones or external speakers.
- Playback on the projector.
Bluetooth
Connect external sound devices via Bluetooth
If you want to connect Bluetooth speakers/head- phones,select)on the home
page,find the
Bluetooth device and pair it.
Bluetooth speaker Press source ),select [Bluetooth Speaker] to enter the
page,and connect your device to the projector.
Specifications
Native Resolution: 1280720p
SpeakerDrivers: 3W1
ThrowRatio: 1.35:1
AspectRatio: 16:9/4:3
Recommended Screen Size: 60″-120″
PowerConsumption: 45W
PowerInput: 100-240V AC,50-60Hz 1.5A
ISED WARNINGS
This device contains licence-exempt transmitter(s)/receiver(s)that comply with
Innovation,Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference,including interference that may cause undesired operation of the device.
This device complies with the conformance or field strength limits of this equipment RF users can acquire the corresponding information on RF exposure and compliance. The minimum distance from the body to be used is 20cm.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules.Operation is subject to the
following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received,including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
fora Class B digital device,pursuant to Part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.This equipment generates uses and can radiate radio
frequency energy and,if not installed and use in accordance with the
instructions,may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and
on,the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity
We (Manufacturer is responsible for this declaration)Dynanic
(Shenzhen)Technology Limited20th Floor,Building 4, Tianan Cloud Park,Bantian
St.,Longgang District,Shenzhen,China
Declare under our sole responsibility that the product
Trade name:ULTIMEA
Equipment:Projector
Model No.:U0200
To which this declaration relates is in conformity with the essential
requirement set out in the Council Directive on the Approxmation of the laws
of the Member
States relating to LVD Directive (2014/53/EU)&Rohs (2011/65/EU)product is
responsible to affix
CE marking, the following standards were applied:
EN IEC 62311:2020
ETSI EN 301489-1
V2.2.3(2019-11)ETSI
EN 301489-17
V3.2.4(2020-09)
EN 55032:2015
EN 55035:2017
EN 61000-3-2:2019
EN 61000-3-3:2013+A1:2019| IEC 62321-3-1:2013
IEC 62321-5:2013
IEC
62321-4:2013+AMD1:2017
IEC 62321-6:2015
IEC 62321-7-2:2017
IEC 62321-6:2015
IEC 62321-8:2017
---|---
Signature:
Date: 2023.09.01
Apollo P10 Video Projector
Model No.:U0342
**** Dynanic GmbH
Buchenring 57,22359 Hamburg,Germany
UK Crossborder limited
Made in China
Manufacturer:Dynanic (Shenzhen) Technology Limited
Address: 20th Floor,Building 4,Tianan Cloud
Park, Bantian St, Longgang District, Shenzhen, China 518000
If you need our support,kindly reach out to our service team.We are always
glad to help.
+1888-598-8875(US)
Mon-Fri 9am-5pm(PST)
+4989-628-25828 (EU
Mon-Fri 9am-5pm(CET)
support@ultimea.com
support@ultimea.de
supportultimea.com
supportultimea.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>