ULTIMEA Tapio I Pro 2.0 Channel Soundbar User Manual

ULTIMEA Tapio I Pro 2.0 Channel Soundbar

Thanks for purchasing Ultima Tapir I Pro. This guideline aims to offer you details on setting up this sound bar so that you can enjoy the ultimate sound experience

ACCESSORIES

Power adapter Optical cable AUX audio cable Wall mounting bolts

DIAGRAM (BUTTONS, PORTS & INDICATOR)

1. Power: Short press to turn on, long press to turn off. |
   Mode: Turn it on and then press to switch the mode.

2. Short press for next song.
   Long press for increasing volume.

3. Short press for previous song
   Long press for decreasing volume.

4. Play/Pause: Play/Pause in BT and USB mode.

5. ARC: Use to connect compatible devices using a HDMI cable (not provided).

6. OPTICAL IN: Use to connect compatible devices using an optical cable (provided).

7. USB IN: Connect to the flash drive for playing MP3/WAV files (FAT32 format and 64GB max)

8. AUX IN: Connect to the compatible devices via the 3.Sum-RCA stereo jack cable (provided)

9. DC IN: Use to connect the DC power supply.

MODE

nor
UC| DYNAMIC mode| |

PLACEMENT

1. Table Placement
   Placement
   Table placement
   Place the sound bar on a solid surface.

2. Wall Mounted
   

Remote Control

Battery installation

Use remote control
The working range of remote is +/-30° in both Vertical and Horizontal Direction.

USING YOUR SOUND BAR

1. Connect to Power

2. Connect to TV
   Use Remote Control or Button on Sound bar to change modes.
   Note:

3. Prior to usage, check whether your TV has HDMI ARC, Optical and Aux Output.

4. Prior to using HDMI ARC connection, please ensure your TV supports HDMI ARC and HDMI Cable is not lower than HDMI 1.4.

5. Turn on PCM settings of your TV When connected in Optical Mode in case there is no sound.

6. 32 is the maximum volume of the sound bar.

7. Connect to Other Device
   Need to purchase one3.5mm-3.Sum audio cab Leif there is only 3.Smm female output on your Devices.

8. Connect to Bluetooth Device
   Short press “BT” button on the remote control to enter Bluetooth mode.
   The BT bbl.: will flash when entering the pairing mode, and bbl.: will stop flashing once successfully paired

SPECIFICATION

Safety Instructions

1. Avoid dropping
2. Do not disassemble
3. Avoid extreme temperatures
4. Don’ t use the device outdoors during thunderstorms
5. Use original or certified cables
6. Don’ t use any corrosive cleaner/ oil to clean
7. The products should not be exposed to dripping or splashing water

FCC Regulatory Compliance

NoFCC Regulatory Compliance
Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. the: This equipment has been tested and found to comply with the limits for a Class Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)
A This mark shown on the product or its packaging, indicates that this product should not – To prevent possible harm to the environment or human health from uncontrolled  waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

References

• ULTIMEA: Home Theater Solutions - Projectors and Soundbars
• Ultimea ­– Affordable Soundbars, Projectors and Home Audio Systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>