profi pumpe 2000-1 Solar Pond Pump Instruction Manual

: July 26, 2024
: profi-Pumpe

Table of Contents

profi pumpe 2000-1 Solar Pond Pump
Specifications
Product Information
Usage Instructions
FAQ
OPERATING INSTRUCTIONS
INTRODUCTION
OPERATION
PERFORMANCE
GUARANTEE REGULATIONS
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

profi pumpe 2000-1 Solar Pond Pump

Specifications

Model: OASIS 200-1 (5 001 001 012)
Type: Solar Pond Pump
Version: 24.02
Website: http://www.profi-pumpe.de

Product Information

The OASIS Solar Pond Pump is a high-quality fountain pump system designed for energy-efficient use in outdoor or indoor settings. It serves as an attractive feature in gardens or seed trays. The pump operates independently from the mains power supply due to its high-quality solar technology, allowing for immediate use anywhere.

Usage Instructions

Introduction: Congratulations on your purchase. Ensure functional security and operational safety.
Important Notes:
- The performance of the pump depends on solar panel orientation and intensity of sunlight.
- Avoid technical modifications as they may void the warranty.
- Report transport damages promptly to the package distributor.
Operation:
Unpack all components carefully.
Mount the solar panel ensuring it receives direct sunlight.
Adjust the solar panel angle for optimal energy collection.
Connect the pump, solar panel, and LED light to the battery.
Ensure the flow is fully open to avoid water blockages.
Frost Protection: Remove and store the pump in a frost-proof environment if freezing is likely.
Servicing: Clean sediment in the pump shell or filter cribs if power loss occurs. Follow instructions for impeller maintenance and solar panel cleaning.

FAQ

Q: What should I do if my pump loses power or stops working?
A: Clean sediment in the pump shell or filter cribs. You can open the pump housing to access and clear the impeller if needed.
Q: Can I make technical modifications to the pump?
A: It is not recommended to conduct technical modifications as it may void the warranty and cause operational issues.

OPERATING INSTRUCTIONS

profi-pumpe-2000-1-Solar-Pond-Pump-FIG-1 Spare parts

For each set components are available on demand for replacement parts.
Please contact us at: pumpe@wovodo.de

We ask you to describe your service concerns about our service platform. So we have all the data and manipulate the process faster. http://www.profi- pumpe.de/service.ph.

profi-pumpe-2000-1-Solar-Pond-Pump-FIG-2

Assembly Instruction of solar pond pump set.

INTRODUCTION

We would like to congratulate you on the purchase of our pump.
We appreciate your trust.
That‘s why functional security and operational safety stand by us in the first place.

IN GENERAL

Solar Pond Pump Kits are high-quality fountain pump systems for energy use in outdoor or indoor use.
The perfect eyecatcher in your garden or seed tray.
Through the use of high-quality solar technology the Solar Pond Pump Kits are independent and anywhere to use immediately.

IMPORTANT: The performance of the pump depends on the orientation of the solar panels toward the sun and the intensity. The max. Data was obtained under optimal conditions. A feature in the shade or on cloudy days can not be guaranteed. In models with a battery, operation depends on the function of the battery.
It‘s recommended NOT to conduct yourself technical modifications. First, it is not certain whether these changes are technically correct, and, secondly, because no guarantee can be granted.
Transport damages are immediately to be reported to the package distributor and to us in written form. Failure to give timely notice to the shipping company, and therefore rejected your claims from the transport company, so we can not accept these claims as well. In your legal obligation to cooperate to minimize damage, we point out expressly herewith.

OPERATION

Read through the instructions and download the latest necessarily given from the website.

Unpack all components carefully
Mount the solar panel (see illustration). Remove the protective film from the solar panel (if any).
Position the solar panel so that it receives direct sunlight. The fountain can not work if the solar panel is shaded.
Adjust the solar panel angle to maximize the amount of solar energy collected .
Connect the pump, panel, and the light on the battery (see illustration). Check whether the flow is fully open (or else promote little or no water).

profi-pumpe-2000-1-Solar-Pond-Pump-FIG-5

FROST

Frost can cause damage to the pump. The pump must be removed and stored in a frost-proof environment if the water is likely to freeze.

PERFORMANCE

The performance of the pump depends on the orientation of the solar panel to the sun and its intensity. The maximum data is achieved under optimum conditions. Operation in the shade or on cloudy days cannot be guaranteed.
The solar pond sets are primarily designed for use in the summer months. However, the solar panel output should also be sufficient for operation on days in spring and autumn with excellent sunlight. However, this cannot be guaranteed.
For models with battery operation, the function of the solar pond set depends on the charge status of the batteries.

profi-pumpe-2000-1-Solar-Pond-Pump-FIG-6

SECURITY TIPS

Obey valid regulations on the electrical security
Never run the pump dry
Pumping inflammable, as well as all other aggressive liquids is prohibited
Pay attention to the medium max. 40°C
Any altering of the product itself or changing of the components is forbidden.
With longer unused times, clean the pump, wash it out with clear water, dry and store it at room temperature
Do not connect the pump to any AC voltage power directly, it’s ONLY for DC Voltage power.
Operate the pump in freshwater or saltwater only (never above 50°C), especially keep it away from flammable liquids.
All solar panels are very sensitive, protecting it against external mechanical influences (shock, vibration, etc.)

The manufacturer explains

To take over no responsibility in the case of accidents or damages based on carelessness or disregard to the instructions in this book.
To reject every responsibility for the damages which originate from the improper use of the pump.

SERVICING
If after some time the pump starts losing power or stops working, please clean up sediment in the pump shell or filter cribs. Kindly note the pump can be opened by pressing down at the bottom of the filter housing. To clear the impeller, open the pump housing at the front by sliding up the front plastic cover.

For models: Oasis 200-1 Rügen 120-1

profi-pumpe-2000-1-Solar-Pond-Pump-FIG-8

For models: OASIS 500-2

OASIS 1000-1
OASIS 1300-1
OASIS 2000-1

profi-pumpe-2000-1-Solar-Pond-Pump-FIG-9

The following controls should be carried out regularly:

Cleanness of the medium (no mud, see technical data)
Moreover, the pump should be emptied with the danger of frost, be washed out with clear water, and stored dry.

GUARANTEE REGULATIONS

For all manufacturer defects and material defects we grant the legal guarantee time (new and unused product).
In such cases, we take over the exchange or the repair of the pump. Forwarding expenses are not carried by us.
The guarantee is not valid with:

Material wear (sealing rings, impeller wheels, impeller chambers)
Unjustified interventions or changes in the pump
Damages by self-fault
Improper servicing and improper use
DRY RUNNING (Also partially!) of the pump

Moreover, we give no damage compensation for secondary damages!

RECOGNISING AND REPAIRING MISTAKES

Problem	Possible cause	Solution
The pump will not turn on	No sunlight	The orientation of the solar panels up

to the sun
The defective pump / solar panel broken| Replace the pump or solar panel. For fault isolation: solar panel Check if the specified voltage is provided. Operate the pump to an external battery.
Pump runs but no water is encouraged| Pump impeller and filter housing polluted| Disassemble and clean under point 7, the pump and the housing (through water and a soft brush)
Coarsening or fountain nozzles are dirty| Disassemble and clean the tube and the fountain nozzle
No proper water fountain| Fountains nozzles and tubes are dirty| Clean the fountain nozzles or tubes

NOTES ON PRODUCT LIABILITY
We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if no changes were made to the equipment. We are only liable for repairs if original spare parts and accessories were used and repairs are carried out by our authorized service.

NOTES ON DISPOSAL

Electro devices of our company, labeled with the symbol of the crossed trash bin, are not permitted to be disposed of in your household garbage. We are registered at the German registration department EAR under the WEEE-No. DE79535656. This symbol means that you’re not allowed to treat this product as a regular household waste item – it has to be disposed at a recycling collection point of electrical devices.
This is the best way to save and protect our earth.
THANK YOU FOR YOUR SUPPORT!

EU DECLARATION OF CONFORMITY

The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies that the products named overleaf,
namely OASIS 200-1, OASIS 250-1, OASIS 500-1/2, OASIS 1000-1, OASIS 1300-1, OASIS 2000-1, RÜGEN 120-1 as placed on the market, complies with the relevant provisions listed below, the relevant EU harmonized directives and the EU standard for safety. This declaration of conformity applies insofar as no modifications are made to the product. The sole responsibility for issuing this declaration of conformity lies with the manufacturer.
The sole authorized person to keep the technical documents:
Amur S.à r.l. – 36, Rue de la Gare – L-5540 Remich

Low Voltage Directive (2014/35/EU)
EC Electromagnetic compatibility directive (2014/30/EU)
The following harmonized standards: