D-Link DPE-301GI 1 Port Gigabit PoE Injector Installation Guide
- July 24, 2024
- D-Link
Table of Contents
D-Link DPE-301GI 1 Port Gigabit PoE Injector
Specifications
- Model: DPE-301GI
- Port: 1-Port Gigabit
- Power Input: DC 54V
- Compatibility: PoE Devices such as Access Points, Cameras, etc.
Installation Steps
- Connect the Ethernet cable from your router to the LAN IN port on the DPE-301GI.
- Connect the DC 54V power adapter to the designated port on the DPE-301GI.
- Connect the PoE OUT port to your PoE device (e.g., PoE Access Point, PoE Camera).
Usage Tips
- Ensure proper power input (DC 54V) for the DPE-301GI to function correctly.
- Check compatibility with your PoE devices before connecting.
- Refer to the user manual for advanced settings and troubleshooting.
Frequently Asked Questions
Q: What should I do if the device is not providing power to my PoE device?
A: Check the power input and connections to ensure everything is properly
set up. Verify compatibility with your PoE device.
Q: Can I use this PoE injector with non-PoE devices?
A: No, the DPE-301GI is designed specifically for PoE devices and may not
work with non-PoE devices.
Ver 1.00(EU)_105x148.5 2015/07/13 10704-0320040
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>