CHAUVET DJ Q4BT ILS EZLink Par User Manual
- July 23, 2024
- Chauvet DJ
Table of Contents
CHAUVET DJ Q4BT ILS EZLink Par
Product Information
Specifications
- Product Name: EZLink Par Q4BT ILS
- Manufacturer: Chauvet & Sons, LLC
- Trademark: Chauvet, Chauvet DJ, EZLink
Before You Begin
- What Is Included: The package should contain the EZLink Par Q4BT ILS unit, power cable, and user manual.
- Unpacking Instructions: Carefully unpack the product and check for any visible damage.
Introduction
- Product Overview: The EZLink Par Q4BT ILS is a versatile lighting fixture suitable for various events and venues.
- Product Dimensions: Refer to the user manual for detailed dimensions of the product.
Setup
- AC Power: Connect the power cable to a suitable power source following the guidelines in the manual.
- Fuse Replacement: Follow the instructions provided in the manual for replacing fuses if needed.
- Battery Power: The fixture can also be powered by batteries, ensure to use compatible batteries as specified in the manual.
- Power Linking: Multiple fixtures can be linked together for synchronized operation, refer to the manual for detailed linking instructions.
FAQ
-
Q: Can I use the EZLink Par Q4BT ILS outdoors?
A: The EZLink Par Q4BT ILS is suitable for outdoor use, but ensure it is protected from direct exposure to water or extreme weather conditions. -
Q: How do I update the firmware of the EZLink Par Q4BT ILS?
A: Firmware updates can be downloaded from the manufacturer’s website. Follow the provided instructions for updating the firmware.
Edition Notes
The EZLink Par Q4BT ILS User Manual includes a description, safety
precautions, installation, programming, operation, and maintenance
instructions for the EZLink Par Q4BT ILS as of the release date of this
edition.
Trademarks
Chauvet, Chauvet DJ, the Chauvet logo, and EZLink are registered trademarks or
trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the
United States and other countries. Other company and product names and logos
referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited
to, all designs, text, and images are owned by Chauvet.
© Copyright 2024 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for
professional information purposes only. Chauvet expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its
content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11
in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to
scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as
this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in
all respects. However, Chauvet assumes no responsibility and specifically
disclaims any liability to any party for any loss, damage, or disruption
caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident, or any other cause. Chauvet
reserves the right to revise the content of this document without any
obligation to notify any person or company of such revision; however, Chauvet
has no obligation to make and does not commit to make any such revisions.
Document Revision
Go to www.chauvetdj.com for the latest version.
Revision | Date | Description |
---|---|---|
2 | 02/2024 | Updated formatting / added BT cert logo. |
Before You Begin
What Is Included
- EZLink Par Q4BT ILS
- Power cable
- Quick Reference Guide
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure
all the parts are in the package and are in good condition.
Claims
- If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection.
- For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Convention | Meaning |
---|---|
1–512 | A range of values |
50/60 | A set of values of which only one can be chosen |
Settings | A menu option not to be modified |
< ENTER> | A key to be pressed on the product’s control panel |
ON | A value to be entered or selected |
Symbols
Safety Notes
- ALWAYS:
- Connect to a grounded circuit.
- Connect to operating voltages as specified on the product’s spec sticker.
- Disconnect from power before replacing the fuse.
- Disconnect from its power source during periods of inactivity.
- Use a safety cable when suspending overhead.
- Heed all restrictions and warnings on the spec sticker.
- Mount in a location with at least 20 in (50 cm) of ventilation.
- Replace the fuse with the same type and rating.
- Use a clamp with a captive bolt when a single hanging bracket is used.
- In the event of a serious operating problem, stop using it immediately.
- DO NOT:
- Open this product or attempt any repairs. It contains no user-serviceable parts.
- Look at the light source when the product is on.
- Use if the power cord is crimped or damaged.
- Disconnect by pulling on the power cord.
- Allow flammable materials close to the product when it is operating.
- Touch the housing when it is on.
- Block any ventilation holes/slots in the housing.
- Connect to a dimmer or rheostat.
- Carry the product with its power cord.
- Operate in temperatures higher than 104°F (40°C).
- Expose to environments that exceed the Ingress Protection (IP) rating.
- Expose to rain or moisture.
- Use outdoors.
- Submerge.
- Leave outdoors for extended periods.
- Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation, or shock.
- Set this product on a flammable surface.
Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning!
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
INTRODUCTION
Product Overview
# | Name |
---|---|
1 | Mounting bracket |
2 | Mic |
3 | Power on/off |
4 | Fuse holder |
5 | Battery |
6 | Power in/out |
7 | Safety loop |
8 | D-Fi USB port |
9 | Bracket adjustment knob |
10 | 3-pin DMX in/out |
11 | Menu buttons |
12 | Display screen |
13 | Battery status indicator |
Product Dimensions
Setup
AC Power
The EZLink Par Q4BT ILS has an auto-ranging power supply, and it can work with
an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s
power requirements (circuit breaker, power outlet, and wiring), use the
current value listed on the label affixed to the product’s back panel or refer
to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
- Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse Replacement
- Disconnect the product from power.
- Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
- Pry the safety cap out of the housing.
- Remove the blown fuse from the clip on the front of the safety cap and replace it with a fuse of the same type and rating.
- Re-insert the fuse holder and reconnect power.
Battery Power
The EZLink Par Q4BT ILS comes with a rechargeable lithium battery for cable-
free operation.
Charging the Battery
The battery charges whenever the EZLink Par Q4BT ILS is plugged into a power
source using the included power cord. If the product is plugged in and not in
operation, make sure the product is turned off.
- The LED indicator light will flash if units are overcharged.
- DO NOT use the EZLink Par Q4BT ILS on full power mode (all LEDs at 100%) while being charged/plugged into a power source, as the unit will get extremely hot.
Battery Life Indicator
The indicators on the LED Menu Display show how much battery life remains
available. The drawing below provides a key to reading the battery life
indicators.
Battery Run Time
Maximum Run Time (all colors on)| Maximum Run Time (single color
on)| Recharge Time
---|---|---
Up to 8 hours| Up to 20 hours| 4 hours
Power Linking
The product provides power linking via the Edison outlet located in the back
of the product. Please see the diagram below for further explanation.
Power-Linking Diagram
- It is possible to power link up to 16 EZLink Par Q4BT ILS products on 120 VAC or up to 29 EZLink Par Q4BT ILS products on 230 VAC.
- The power-linking diagram corresponds to the North American version of the product ONLY! If using the product in other markets, consult with the local Chauvet distributor, as power-linking connectors and requirements may differ by country or region.
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
Orientation
The EZLink Par Q4BT ILS may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
- Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
- Make sure that the structure and attachment points can support the weight before hanging the product. (see the Technical Specifications).
- When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
- When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
- When power linking multiple products, mount the products close enough for power-linking cables to reach.
- The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Mounting Diagram
Operation
Control Panel Operation
To access the control panel functions, use the four buttons located next to
the display. Please refer to the Introduction to see the button locations on
the control panel.
Mode
| Programming Levels|
Description
---|---|---
DMX Mode| 4Ch| d 1–509| 4-channel DMX mode
8-channel DMX mode
8Ch
ILS Mode| iLS| iLS1–4| Sets ILS mode
Static Colors| C- –| C 1–15| Static colors
Automatic Programs| P- –| P 1–5| Automatic programs
Auto Speed| S- –| S. 1–100| Program speed for P 1–5
Dimmer| d- –| L. 1–255| Dimmer
Sound- Active Mode| Snd| Snd1–5| Sound-active programs
Sensitivity| SEnS| u 0–100| Sound sensitivity
Custom Color Mixing
|
u- –
| r. 0–255
G. 0–255
b. 0–255
A. 0–255
|
Custom static colors combine red, green, blue, and amber
S. 0–100| Strobe rate
**Bluetooth Mode*| bLE| _**| Bluetooth control mode
displays Bluetooth ID
Control Mode
|
SEt
| ir| on| Turns infrared on or off
oFF
out| SLAV| Enable Master/Slave with other BT products
dMX| Enable Master/Slave with non-BT products
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners.
DMX Configuration
The EZLink Par Q4BT ILS works with a DMX controller. Information about DMX is
in the Chauvet DMX Primer, which is available from the Chauvet website:
www.chauvetdj.com.
DMX Personality and Starting Address
- When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.
- The EZLink Par Q4BT ILS uses up to 8 DMX channels in an 8Ch DMX mode, which defines the highest configurable address to 505.
- If you are not familiar with the DMX protocol, download the DMX Primer from: www.chauvetdj.com.
To select the starting address, do the following:
- Press
- Press
and d 1–509 will show on the display. - Use
or to select the starting address. - Press
.
D-Fi USB Connectivity
The EZLink Par Q4BT ILS can become a D-Fi wireless receiver/transmitter with
the use of the D-Fi USB from Chauvet DJ. Simply set the product’s DMX
Personality and DMX Address, set the DIP switch D-Fi receiving/transmitting
channel, and then plug it into the D-Fi USB port.
WARNING!
DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may
cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
- D-Fi USB
- Wired DMX
- Manual Digital Display/Menu Buttons
D-Fi USB Compatibility
The D-Fi USB can receive a DMX signal from the D-Fi Hub and the FlareCON Air 2
as well as other D-Fi USB products.
D-Fi USB Configuration
- Set the DMX Personality and DMX address on the EZLink Par Q4BT ILS.
- Use the Chart provided to set BOTH:
- the Channel, and then
- The Receiving or Transmitting option
DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
D-Fi USB DIP Switch Channels
DMX Values
4Ch | 8Ch | Function | Value | Percent/Setting |
---|---|---|---|---|
1 | 1 | Red | 000 ó 255 | 0–100% |
2 | 2 | Green | 000 ó 255 | 0–100% |
3 | 3 | Blue | 000 ó 255 | 0–100% |
4 | 4 | Amber | 000 ó 255 | 0–100% |
– | 5 | Strobe | 000 ó 015 |
016 ó 255
| No function
Strobe, slow to fast
–
| ****
6
| ****
Auto programs
| 000 ó 005
006 ó 055
056 ó 106
107 ó 157
158 ó 208
209 ó 255
| No function
Auto program 1 (programs 2–5)
Auto program 2
Auto program 3
Auto program 4
Auto program 5
–| 7| Auto speed| 000 ó 250
251 ó 255
| Program speed, slow to fast
Sound-active mode
–| 8| Dimmer| 000 ó 255| 0–100%
Standalone Configuration
Set the product in one of the standalone modes to control without a DMX
controller.
Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.
Preset Color Mode
To run the EZLink Par Q4BT ILS on a static color, follow the instructions
below:
- Press
- Press
. - Use
or to select a static color, from C 1–15. - Press
.
Automatic Programs
To run the EZLink Par Q4BT ILS in automatic mode, follow the instructions
below:
- Press
- Press
. - Use
or to select an automatic program, from P 1–5. - Press
.
Auto-Program Speed
To change the auto-program speed on the EZLink Par Q4BT ILS, do the following:
- Press
- Use
or to increase or decrease the program speed, from S. 1–100. - Press
. The product will return to the last selected mode.
Dimmer
To set the dimmer curve, follow the instructions below:
- Press
- Press
. - Use
or to increase or decrease the dimmer, from L. 1–255. - Press
.
Sound-Active Programs
To run the EZLink Par Q4BT ILS with a sound-active program, follow the
instructions below.
- Press
- Use
or to set the Sound-Active program, from Snd1 to Snd5. - Press
.
Sound Sensitivity
To set the sound sensitivity on the EZLink Par Q4BT ILS, do the following:
- Press
- Use
or to increase or decrease the sound sensitivity, from u 0–100. - Press
.
Custom Color Mixing
To custom mix a static color, do the following:
- Press
- Press
and one of the following will show on display. - r. _ (red)
- G. _ (green)
- b. _ (blue)
- A. _ (amber)
- S. _(Strobe)
- Press
to cycle through the color settings. - When the desired color shows on the display, use
or to increase or decrease the color value, from 000–255 (red, green, blue, amber) or 000–100 (Strobe). - Repeat steps 3 and 4 until the product outputs as desired.
IRC-6 Infrared Remote Control
The EZLink Par Q4BT ILS can be operated with the CHAUVET IRC-6. To enable IR
wireless control, follow the instructions below.
- Press
- Press
. - Press
repeatedly until it shows on the display. - Press
. - Press
repeatedly until ON shows on the display
IRC-6 Operation
Automatic Mode
To turn on Automatic mode with the IRC-6:
- Press
on the IRC-6. - Press <+> or <–> to change the program.
Sound-Active Mode
To turn on Sound-Active mode with the IRC-6:
- Press
on the IRC-6. - Press <+> or <–> to increase or decrease the sensitivity.
To adjust the sound sensitivity:
- Press
on the IRC-6. - Press <+> or <–> to increase or decrease the sensitivity.
Strobe
To turn on Strobe mode with the IRC-6:
- Press
on the IRC-6. - Press <+> or <–> to increase or decrease the strobe speed.
Manual Control
To manually select the laser color with the IRC-6:
- Press the desired color, from
(red), (green), (blue), or (amber).
To manually select the laser pattern with the IRC-6:
-
1. Select a manual color.
- Press <+> or <–> to cycle through the patterns.
Black Out
To black out the lights with the IRC-6:
- Press
on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE:
The IRC-6 will not respond to any inputs when Black Out is activated. If the
product does not respond when a button is pressed, try pressing
- Any setting on the IRC-6 will be saved until the system is rebooted. The system will revert to Auto Mode after reboot.
- The buttons on the IRC-6 not listed above are reserved for future use.
Bluetooth Control
Bluetooth control mode allows users to control one or more EZLink Par Q4BT ILS
products via Bluetooth connection on the BTAir app.
To operate the product via Bluetooth control mode:
- Press
- Press
. - Use the ID number on the display to identify the product on the BTAir app.
- Ensure that all products are set to Bluetooth control mode before operating the BTAir app, as failure to do so may require restarting the app.
- For further instructions on how to pair and operate products with the BTAir app, download the BTAir User Manual from www.chauvetdj.com.
Master/Slave Mode
The Master/Slave mode allows a single EZLink Par Q4BT ILS product (the
“master”) to control the actions of one or more EZLink Par Q4BT ILS products
(the “slaves”) without the need of a DMX controller. The master product will
be set to operate in Standalone, whereas the slave products will be set to
operate in Slave mode. Once set and connected, the slave products will operate
in unison with the master product. Configure the products as indicated below.
Slave products:
- Press
- Press
. - Set the DMX address to d 1.
- Connect the DMX input of the first slave product to the DMX output of the master product.
- Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.
- Finish setting and connecting all the slave products.
Master product:
- Press
- Press
. - Set the master product to operate in standalone.
- Make the master product the first product in the DMX daisy chain.
- Configure all the slave products before connecting the master to the daisy chain.
- Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
- Do not connect more than 18 slaves to the master.
D-Fi USB Master/Slave Mode
The D-Fi USB allows a single EZLink Par Q4BT ILS product (the “master”) to
control the actions of one or more EZLink Par Q4BT ILS products (the “slaves”)
without the need of a DMX controller or DMX cables. The master (transmitter)
product will be set to operate in standalone mode, while the slave (receiver)
products will be set to operate in DMX mode. Once set and connected, the slave
products will operate in unison with the master product. Configure the
products as indicated below.
Slave products:
- Press
- Press
. - Use
or to set the starting address to d 1. - Press
. - Set the D-Fi USB to receive on a specific channel, 1–16.
- Plug in the D-Fi USB.
- Finish setting and connecting all the slave products.
Master product:
- Set the master product to operate in standalone mode.
- Set the D-Fi USB to transmit on the D-Fi channel the slaves are receiving.
- Plug in the D-Fi USB.
- All products must be set to the same DMX personality, DMX address, and D-Fi channel.
- Configure all the slave products before configuring the master to transmit.
- Never connect a DMX controller to a D-Fi channel configured for Master/Slave operation because the controller may interfere with the signals from the master.
ILS Mode
ILS (Integrated Lighting System) provides 4 modes that synchronize with the
GigBAR MOVE+ILS: Modes 1 and 3 synchronize with side 1 of the GigBAR MOVE+ILS,
whereas modes 2 and 4 synchronize with side 2 of the GigBAR MOVE+ILS. When
linked, effects will sync with the most similar effect on the selected side of
the GigBAR MOVE+ILS: Kinta effects will sync with one of the kintas, moving
heads will sync with one of the moving heads, and wash effects will sync with
one of the pars. Laser effects will sync with the laser, and strobe effects
will sync with the strobe effects regardless of ILS mode.This product will
synchronize with the par effect on the selected side of the GigBAR MOVE+ILS.
To set the EZLink Par Q4BT ILS to respond to an ILS signal:
- Press
- Use
or to select from iLS1 (side 1), iLS2 (side 2), iLS3 (side 1), or iLS4 (side 2). - Press
.
Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This
can lead to a reduction of the light source’s life and/or mechanical wear. To
maintain optimum performance and minimize wear, clean the lighting products at
least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
- Unplug the product from power.
- Wait until the product is at room temperature.
- Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
- Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
- Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.
- Softly drag any dirt or grime to the outside of the transparent surface.
- Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Technical Specifications
Dimensions and Weight
Length | Width | Height | Weight |
---|---|---|---|
5.7 in (145 mm) | 5.7 in (145 mm) | 7.2 in (183 mm) | 3.16 lb (1.6 kg) |
Note: Dimensions in inches rounded to the nearest hundredth.
Power
Power Supply Type | Range | Voltage Selection |
---|---|---|
Switching (internal) | 100 to 240 VAC, 50/60 Hz | Auto-ranging |
Parameter | 120 V, 60 H Z | 230 V, 50 H Z |
Consumption | 35 W | 34 W |
Operating current | 0.5 A | 0.3 A |
Power-linking current (products) | 8 A (16 products) | 8 A (29 products) |
Fuse | T 1 A, 250 V | T 1 A, 250 V |
Power I/O | U.S./Canada | Worldwide |
Power input connector | IEC | IEC |
Power output connector | Edison | IEC |
Power cord plug
Light Source
| Edison (U.S.)| Local plug
Type| Quantity| Color| Power| Current| Lifespan
LED| 4| Quad-color RGBA| 6 W| 3 A| 50,000 hours
Photometrics| Strobe rate
0 to 20 Hz| Beam angle
15°| Field angle
234°| Illuminance @ 2m
1,829 lux|
Thermal
-
Maximum External Temperature
104 °F (40 °C) -
Cooling System
Convection
DMX
-
I/O Connector
3-pin XLR -
Channel Range
4 or 8
Ordering
-
Product Name
EZLink Par Q4BT ILS -
Item Code
10032011 -
UPC Number
781462223595
Contact Us
General Information/Technical Support
Chauvet World Headquarters
- Address: 3360 Davie Rd., Suite 509 Davie, FL 33314
- Voice: 954-577-4455
- Fax: 954-929-5560
- Toll Free: 800-762-1084
Technical Support
- Voice: 844-393-7575
- Fax: 954-756-8015
- Email: chauvetcs@chauvetlighting.com
- Website: www.chauvetdj.com.
Chauvet U.K.
- Address: Pod 1 EVO Park Little Oak Drive, Sherwood Park Nottinghamshire, NG15 0EB UK
- Voice: +44 (0) 1773 511115
- Fax: +44 (0) 1773 511110
- Email: UKtech@chauvetlighting.eu
- Website: www.chauvetdj.eu
Chauvet Benelux
- Address: Stokstraat 18 9770 Kruishoutem Belgium
- Voice: +32 9 388 93 97
- Email: BNLtech@chauvetlighting.eu
- Website: www.chauvetdj.eu.
Chauvet France
- Address: 3, Rue Ampère 91380 Chilly-Mazarin France
- Voice: +33 1 78 85 33 59
- Email: FRtech@chauvetlighting.fr
- Website: www.chauvetdj.eu.
Chauvet Germany
- Address: Bruno-Bürgel-Str. 11 28759 Bremen Germany
- Voice: +49 421 62 60 20
- Email: DEtech@chauvetlighting.de
- Website: www.chauvetdj.eu
Chauvet Mexico
- Address: Av. de las Partidas 34 – 3B (Entrance by Calle 2) Zona Industrial LermaLerma, Edo. de México, CP 52000
- Voice: +52 728-690-2010
- Email: servicio@chauvet.com.mx
- Website: www.chauvetdj.mx.
Warranty & Returns
For warranty terms and conditions and return information, please visit our website.
- For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
- For customers in the United Kingdom, the Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration.