CHAUVET DJ COREpar Q60 ILS Wash Lights Instruction Manual
- June 3, 2024
- Chauvet DJ
Table of Contents
CHAUVET DJ COREpar Q60 ILS Wash Lights
About This Guide
The COREpar Q60 ILS Quick Reference Guide (QRG) has basic product information
such as mounting, menu options, and DMX values. Download the User Manual from
www.chauvetdj.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE. For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, the Republic of Ireland, Belgium, the
Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-
registration.
Chauvet warrants that this product shall be free from defects in material and
workmanship under normal use, for the period specified in, and subject to the
exclusions and limitations set forth in the full limited warranty on our
website. This warranty extends only to the original purchaser of the product
and is not transferable. To exercise rights under this warranty, you must
provide proof of purchase in the form of an original sales receipt from an
authorized dealer that shows the product name and date of purchase. THERE ARE
NO OTHER EXPRESS OR IMPLIED WARRANTIES.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, the United Kingdom, the Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
- ONLY connect this product to a grounded and protected circuit.
- DISCONNECT from power before cleaning or replacing the fuse.
- DO NOT look at the light source when the product is on.
- Make sure the power cord is not crimped or damaged.
- Never disconnect this product from power by pulling on the cord.
- When mounting this product overhead, ALWAYS use a safety cable.
- DO NOT allow flammable materials close to the product when it is operating.
- DO NOT touch the product’s housing when it is on because it will be hot.
- The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.
- This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or moisture.
- Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- Be sure that no ventilation slots on the unit’s housing are blocked.
- Never connect this product to a dimmer or rheostat.
- Replace the fuse with the same type and rating.
- Never carry the product by the power cord. Use only the hanging bracket or handle to carry this product.
- The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
- In the event of a serious operating problem, stop using it immediately.
- DO NOT open this product. It contains no user-serviceable parts.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact
your distributor to request support or return a product. Refer to Contact Us
at the end of this QRG for contact information.
What is Included
- COREpar Q60 ILS
- Magnetic lens
- Power cord
- Quick Reference Guide
To Begin
Unpack your COREpar Q60 ILS to make sure you have received all parts in good condition. If the box or contents appear damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.
Power Linking
It is possible to power link up to 9 COREpar Q60 ILS products on 120 V or up
to 17 products on 230 V. Never exceed this number. Power-linking cords can be
purchased separately.
Fuse Replacement
- Disconnect the product from power.
- Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
- Pry the safety cap out of the housing.
- Remove the blown fuse from the clip on the front of the safety cap and replace it with a fuse of the exact same type and rating.
- Re-insert the fuse holder and reconnect the power.
Mounting
Before mounting this product, read the Safety Notes.
Mounting Diagram
Control Panel Description
| Button | Function |
|---|---|
| < MENU> | Exits from the current menu or function |
| < UP> | Navigates upwards through the menu list and increases the numeric |
value when in a function
< DOWN>| Navigates downwards through the menu list and decreases the
numeric value when in a function
< ENTER>| Enables the currently displayed menu or sets the currently
selected value into the selected function
Menu Map
Refer to the COREpar Q60 ILS product page on www.chauvetdj.com for the latest menu map.
| Main Level | Programming Levels | Description |
|---|---|---|
| 4- Ch | d 1–509 | 4-channel DMX mode |
| 9- Ch | d 1–504 | 9-channel DMX mode |
| iLS | iLS 1–4 | Sets ILS mode |
| 1: Red 2: Green 3: Blue |
4: White
| | 5: Yellow 6: Magenta 7: Light Pink
8. Cyan
| | 9: Mint green 10: High Power White 11: Sol 12:
Seafoam
C- –
(Static color)
| C 1–29| 13: Turquoise 14: Orange 15: Baby Blue 16: Hot Pink
17: Lime 18: Ocean 19: Baby Pink 20: Goldenrod
| | 21: Sky 22: Lavender 23: Faded Orange 24:
Fuschia
| | 25: 2700K 26: 3500K 27:4000K
28: 5000K
| | 29: 6000K
P- –
(Automatic program)
| P 1| 4-color snap
P 2| 4-color pulse
P 3| 29-color snap
P 4| 29-color pulse
S- –| S. 1–100| Automatic program speed
Snd
(Sound-active)
| Snd1| 4-color snap
Snd2| 29-color snap
SEnS| u 0–100| Sound sensitivity
u- –
(Custom color)
| r. 0–255|
Combine red, green, blue, and white for a custom static color
g. 0–255
b. 0–255
w. 0-255
diN
(Dimmer speed)
| oFF|
Sets the dimmer speed
diN1
diN2
diN3
SEt
(Infrared)
| ir| on| Enables/disables infrared control
off
rESt| yes| Reset to factory default
no
Temp| | Shows the temperature
DMX Linking
The COREpar Q60 ILS can work with a DMX controller. Instructions for
connecting and configuring this product for DMX operation are in the User
Manual. If you are not familiar with DMX, download the DMX Primer from
www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest
recommended DMX address is 504.
Master/Slave Connection
The COREpar Q60 ILS uses the DMX data connection and ILS for its Master/Slave
mode. Information about configuring the COREpar Q60 ILS for Master/Slave
operation is in the User Manual, which is available from the Chauvet website.
ILS Connection
The COREpar Q60 ILS uses the DMX data connection and the D-Fi USB for wireless
connection to the Integrated Lighting System (ILS) ecosystem (patent pending).
For more information about configuring the COREpar Q60 ILS into ILS mode,
please refer to the User Manual available at
www.chauvetdj.com.
IRC-6
The COREpar Q60 ILS can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download instructions for the IRC-6 or the COREpar Q60 ILS User Manual from www.chauvetdj.com.
| Button | Function |
|---|---|
| < BLACKOUT> | Turns LEDs on/off |
| < AUTO> | Enables snap and fade modes |
| < SOUND> | Enables sound active mode |
| < SPEED> | Increases and decreases speed |
| < SENSITIVITY> | Adjusts sound sensitivity |
| < FADE> | Fade program |
| < STROBE> | Adjusts strobe speed |
| < %> | Adjusts brightness |
| < R,G,B,W> | Adjust percentage of red, green, blue, and white colors |
| < 0>–<9> | 1=C1 |
6=C3
| 2=C20
7=C23
| 3=C5
8=C6
| 4=C2
9=C11
| 5=C8
0=C4
< +>| Increases values for controls as described above
< - >| Decreases values for controls as described above
D-Fi USB Connectivity
The COREpar Q60 ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product’s DMX Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation are in the User Manual.
WARNING!
DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may
cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
- D-Fi USB
- Wired DMX
- IRC-6 Remote Control
- Manual Digital Display/Menu Buttons
Master/Slave Mode (D-Fi USB)
The D-Fi USB allows a single COREpar Q60 ILS product (the “master”) to control
the actions of one or more COREpar Q60 ILS products (the “slaves”) without the
need of a DMX controller or DMX cables. The master (transmitter) product will
be set to operate in standalone mode, while the slave (receiver) products will
be set to operate in DMX mode. Once set and connected, the slave products will
operate in unison with the master product.
Configure the products as indicated below.
Slave products:
- Press
- Press
. - Use
or to set the starting address to d 1. - Press
. - Set the D-Fi USB to receive on a specific channel, 1–16.
- Plug in the D-Fi USB.
- Finish setting and connecting all the slave products.
Master product:
- Set the master product to operate in standalone mode.
- Set the D-Fi USB to transmit on the D-Fi channel the slaves are receiving on.
- Plug in the D-Fi USB.
- All products must be set to the same DMX personality, DMX address, and D-Fi channel.
- Configure all the slave products before configuring the master to transmit.
- Never connect a DMX controller to a D-Fi channel configured for Master/Slave operation because the controller may interfere with the signals from the master.
ILS Mode
ILS (Integrated Lighting System) provides 4 modes that synchronize with the
GigBAR MOVE+ILS: Modes 1 and 3 synchronize with side 1 of the GigBAR MOVE+ILS,
whereas modes 2 and 4 synchronize with side 2 of the GigBAR MOVE+ILS. When
linked, effects will sync with the most similar effect on the selected side of
the GigBAR MOVE+ILS: Kinta effects will sync with one of the kintas, moving
heads will sync with one of the moving heads, and wash effects will sync with
one of the pars. Laser effects will sync with the laser, and strobe effects
will sync with the strobe effects regardless of ILS mode.
This product will synchronize with the par effect on the selected side of the GigBAR MOVE+ILS.
To set the COREpar Q60 ILS to respond to an ILS signal:
- Press
- Use
or to select from iLS1 (side 1), iLS2 (side 2), iLS3 (side 1), or iLS4 (side 2). - Press
DMX Values
4- Ch| 9- Ch| Function| Value|
Percent/Setting
---|---|---|---|---
1| 1| Red| 000 255| 0–100%
2| 2| Green| 000 255| 0–100%
3| 3| Blue| 000 255| 0–100%
4| 4| White| 000 255| 0–100%
–| 5| Color macros| 000 010| No function
011 255| Color macros
–
| ****
6
| Strobe
(when Ch. 7 is 000 ó 031 )
| 000 015| No function
016 255| Strobe (slow to fast)
Program speed
(when Ch. 7 is 032 ó 223 )
| 000 255| Program speed, slow to fast
Sound sensitivity
(when Ch. 7 is 224 ó 255 )
| 000 010| Sound sensitivity off
011 255| Sound sensitivity, low to high
–
| ****
7
| ****
Auto program
| 000 031| No function
032 063| Pulse effect, 0–100% (when Ch. 1-4 are active)
064 095| Pulse effect, 100–0% (when Ch. 1-4 are active)
096 127| Pulse effect, 100–0–100% (when Ch. 1-4 are active)
128 159| Automatic 4-color pulse
160 191| Automatic 4-color snap
192 223| Automatic 29-color snap
224 255| Sound-active 29-color snap
–| 8| Dimmer| 000 255| 0–100%
–
| ****
9
| ****
Dimmer speed
| 000 051| Dimmer speed set from display menu
052 101| Dimmer speed mode off
102 152| Dimmer speed mode 1 (fast)
153 203| Dimmer speed mode 2 (medium)
204 255| Dimmer speed mode 3 (slow)
Contact Us
Chauvet World Headquarters
Address: 3360 Davie Rd. Voice:
844-393-7575
Davie, FL 33314
Fax: 954-756-8015
Voice: 954-577-4455
Email: chauvetcs@chauvetlighting.com
Fax: 954-929-5560
Toll-Free: 800-762-1084
Website: www.chauvetdj.com
Chauvet U.K.
Address: Unit 1C
Brookhill Road Industrial Estate Pinxton, Nottingham, UK
Email: UKtech@chauvetlighting.eu
Website: www.chauvetdj.eu
NG16 6NT
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110
Chauvet Benelux
Address: Stokstraat 18
9770 Kruishoutem Belgium
Email: BNLtech@chauvetlighting.eu
Website: www.chauvetdj.eu
Voice: +32 9 388 93 97
Chauvet France
Address: 3, Rue Ampère
91380 Chilly-Mazarin France
Email: FRtech@chauvetlighting.fr
Website: www.chauvetdj.eu
Voice: +33 1 78 85 33 59
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen Germany
Email: DEtech@chauvetlighting.de
Website: www.chauvetdj.eu
Voice: +49 421 62 60 20
Chauvet Mexico
Address: Av. de las Partidas 34 – 3B
(Entrance by Calle 2) Zona Industrial Lerma
Email: servicio@chauvet.com.mx
Website: www.chauvetdj.mx
Lerma, Edo. de México, CP 52000
Voice: +52 728-690-2010.
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.
COREpar Q60 ILS QRG ML6 Rev. 4
© Copyright 2022 Chauvet
All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>