CHAUVET DJ Intimidator Beam 360X LED Moving Head Light User Guide

CHAUVET DJ Intimidator Beam 360X LED Moving Head Light

About This Guide

The Intimidator Spot 375ZX Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and DMX values. Download the User Manual from www.chauvetdj.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For Customers in the United Kingdom, the Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty- registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

• ONLY connect this product to a grounded and protected circuit.
• DISCONNECT from power before cleaning or replacing the fuse.
• DO NOT look at the light source when the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power by pulling on the cord.
• When mounting this product overhead, ALWAYS use a safety cable.
• DO NOT allow flammable materials close to the product when it is operating.
• DO NOT touch the product’s housing when it is on because it will be hot.
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 26 ft (7.9 m) is not expected.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or his service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
• The luminaire is intended for professional use only.
• The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.
• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or moisture.
• Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the unit’s housing are blocked.
• Never connect this product to a dimmer or rheostat.
• Replace the fuse with the same type and rating.
• Never carry the product by the power cord. Use only the handle to carry this product.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
• In the event of a serious operating problem, stop using it immediately.
• DO NOT open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.

Contact

Outside the U.S., U.K., Ireland, Germany, France, Mexico, or Benelux, contact your distributor to request support or return a product. Visit www.chauvetdj.com for contact information.

What is Included

• Intimidator Spot 375ZX
• Power cord
• Hanging bracket
• Quick Reference Guide

To Begin

Unpack your Intimidator Spot 375ZX and make sure you have received all parts in good condition. If the box or contents appear damaged, notify the carrier immediately, not Chauvet.

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Power Linking

It is possible to link up to 4 Intimidator Spot 375ZX products at 120 V or 8 products at 230 V. Never exceed this number. Power-linking cords can be purchased separately.

Fuse Replacement

1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.

Mounting

Before mounting this product, read the Safety Notes.

Mounting Diagram

Control Panel Description

Gobos

Menu Map
Refer to the Intimidator Beam 360X product page on www.chauvetdj.com for the latest menu map.

8CH
Slave| Slave1–4| Selects Slave mode 1, 2, 3, or 4
Auto| Selects Auto mode
Sound| Selects Sound-Active mode

RF

| RF 1–4| Sets the product to work with the RFC-XL remote in group 1, 2, 3, or 4. (RF remote must be bound to the product first)
RFP| Sets the product to work with public RF signal
Manual| Pan|

000–255

| Manual pan control
Tilt| Manual tilt control
Color| Manual color control
Gobo| Manual gobo control
Prism| Manual prism control
Focus| Manual focus control
Frost| Manual frost control
Dimmer| Manual dimmer control
Shutter| Manual shutter control
Setup| Pan Reverse| OFF| Normal pan operation
ON| Reverse pan operation
Tilt Reverse| OFF| Normal tilt operation
ON| Reverse tilt operation
Screen Reverse| OFF| Normal display
ON| Reverse display
Pan Angle| 540| Selects the 540° pan angle range
360| Selects the 360° pan angle range
180| Selects the 180° pan angle range
Tilt Angle| 270| Selects the 270° tilt angle range
180| Selects the 180° tilt angle range
90| Selects the 90° tilt angle range
Totem Mode| OFF| Does not restrict the pan and tilt motion
UP| Restricts the pan and tilt motion for overhead mounting
DOWN| Restricts the pan and tilt motion for surface/floor mounting
Sensitivity| 001–100| Sets sound sensitivity
DMX Loss| Hold| Holds the last setting when signal is lost
Black| Blacks out the product when signal is lost
Auto| Sets the unit to Auto mode when signal is lost
Sound| Sets the unit to Sound mode when signal is lost
Indicator| ON| Enables/disables LED Indicator
OFF
Flash if DMX| ON| Sets whether the LED indicator flashes when the fixture is connected to or disconnected from the DMX
OFF
RF| Bind| Shows instructions on how to bind the RF remote to the product
Reset| Resets the product
Factory Set| Loads factory defaults
Main Level| Programming Levels| Description
---|---|---
Sys Info| Ver:| V_| Displays the firmware version
Running Mode|

_

| Displays the current running mode
DMX Address| _| Displays the current DMX address
Temperature| _| Displays the current product temperature

DMX Linking

The Intimidator Beam 360X can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from  www.chauvetdj.com.

Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 499.

Master/Slave Connection
The Intimidator Beam 360X uses the DMX data connection for its Master/Slave mode. Information about configuring the Intimidator Beam 360X for Master/Slave operation is in the User Manual, which is available from the Chauvet website.

RF Remote
The Intimidator Beam 360X can be operated with the CHAUVET RFC or RFC-XL remotes. For more information about the RF Remote, download instructions for the Intimidator Beam 360X User Manual from www.chauvetdj.com.

Gobos

DMX Values

to slow

3

| ****

6

| ****

Color wheel

| 000 ó 003| White
004 ó 007| Red
008 ó 011| Orange
012 ó 015| Yellow
016 ó 019| Green
020 ó 023| Blue
024 ó 027| CTO
028 ó 031| Cyan
032 ó 035| Magenta
036 ó 039| Lime
040 ó 043| Purple
044 ó 047| Dark yellow
048 ó 051| Pink
052 ó 055| CTB
056 ó 063| UV
064 ó 067| White/red
068 ó 071| Red/orange
072 ó 075| Orange/yellow
076 ó 079| Yellow/green
080 ó 083| Green/blue
084 ó 087| Blue/CTO
088 ó 091| CTO/cyan
092 ó 095| Cyan/magenta
096 ó 099| Magenta/lime
100 ó 103| Lime/purple
104 ó 107| Purple/dark yellow
108 ó 111| Dark yellow/pink
112 ó 115| Pink/CTB
116 ó 119| CTB/UV
120 ó 127| UV/White
128 ó 191| Color cycling rainbow, slow to fast
192 ó 255| Reverse color cycling rainbow, slow to fast
8Ch| 14Ch| Function| Value| Percent/Setting
---|---|---|---|---
**4| ** **7| ****Gobo wheel**

(see Gobos)

| 000 ó 003| Open
004 ó 007| Gobo 1
008 ó 011| Gobo 2
012 ó 015| Gobo 3
016 ó 019| Gobo 4
020 ó 023| Gobo 5
024 ó 027| Gobo 6
028 ó 031| Gobo 7
032 ó 035| Gobo 8
036 ó 039| Gobo 9
040 ó 043| Gobo 10
044 ó 047| Gobo 11
048 ó 051| Gobo 12
052 ó 055| Gobo 13
056 ó 059| Gobo 14
060 ó 063| Gobo 15
064 ó 067| Gobo 16
068 ó 071| Gobo 17
072 ó 075| Gobo 17 shake, slow to fast
076 ó 079| Gobo 16 shake, slow to fast
080 ó 083| Gobo 15 shake, slow to fast
084 ó 087| Gobo 14 shake, slow to fast
088 ó 091| Gobo 13 shake, slow to fast
092 ó 095| Gobo 12 shake, slow to fast
096 ó 099| Gobo 11 shake, slow to fast
100 ó 103| Gobo 10 shake, slow to fast
104 ó 107| Gobo 9 shake, slow to fast
108 ó 111| Gobo 8 shake, slow to fast
112 ó 115| Gobo 7 shake, slow to fast
116 ó 119| Gobo 6 shake, slow to fast
120 ó 123| Gobo 5 shake, slow to fast
124 ó 127| Gobo 4 shake, slow to fast
128 ó 131| Gobo 3 shake, slow to fast
132 ó 135| Gobo 2 shake, slow to fast
136 ó 139| Gobo 1 shake, slow to fast
140 ó 143| Open
144 ó 199| Cycle effect, slow to fast
200 ó 255| Reverse cycle effect, slow to fast
**5| ****8| ****Prism| 000 ó 007| No function
008 ó 015| 16-facet prism
016 ó 130| Prism rotation, slow to fast
131 ó 247| Reverse prism rotation, slow to fast
248 ó 255| 16-facet prism
6| 9| Focus| 000 ó 255| Focus
–| 10| Dimmer| 000 ó 255| 0–100%
8Ch| 14Ch| Function| Value| Percent/Setting
---|---|---|---|---
****7| ****11| ****Strobe| 000 ó 003| Off
004 ó 007| On
008 ó 076| Strobe, slow to fast
077 ó 145| Pulse strobe, slow to fast
146 ó 215| Random strobe, slow to fast
216 ó 255| On
8| 12| Frost| 000 ó 255| 0–100%
****–| ****13| ****Function| 000 ó 007| No function
008 ó 015| Blackout on pan/tilt movement
016 ó 023| Blackout on color wheel movement
024 ó 031| Blackout on gobo wheel movement
032 ó 039| Blackout on pan/tilt/color wheel movement
040 ó 047| Blackout on pan/tilt/gobo wheel movement
048 ó 055| Blackout on pan/tilt/color wheel/gobo wheel movement
056 ó 095| No function
096 ó 103| Pan reset
104 ó 111| Tilt reset
112 ó 119| Color wheel reset
120 ó 127| Gobo wheel reset
128 ó 135| Frost reset
136 ó 143| Prism reset
144 ó 151| Focus reset
152 ó 159| All reset
160 ó 255| No function
****–| ****14| ****Movement macros| 000 ó 007| No function
008 ó 023| Movement macro 1
024 ó 039| Movement macro 2
040 ó 055| Movement macro 3
056 ó 071| Movement macro 4
072 ó 087| Movement macro 5
088 ó 103| Movement macro 6
104 ó 119| Movement macro 7
120 ó 135| Movement macro 8
136 ó 151| Sound-active movement macro 1
152 ó 167| Sound-active movement macro 2
168 ó 183| Sound-active movement macro 3
184 ó 199| Sound-active movement macro 4
200 ó 215| Sound-active movement macro 5
216 ó 231| Sound-active movement macro 6
232 ó 247| Sound-active movement macro 7
248 ó 255**| Sound-active movement macro 8

Contact Us

UKtech@chauvetlighting.eu
www.chauvetdj.eu

Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, France, Germany, Benelux or Mexico, contact the dealer of record.

Intimidator Spot 375ZX QRG ML6 Rev. 1
© Copyright 2022 Chauvet
All rights reserved

Documents / Resources

| CHAUVET DJ Intimidator Beam 360X LED Moving Head Light [pdf] User Guide
Intimidator Beam 360X, LED Moving Head Light, Intimidator Beam 360X LED Moving Head Light, Moving Head Light, 47351
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>