CHAUVET DJ Pinspot Q1Z ILS 20 Watt RGBW LED Compact Pin Spot Light User Manual

Pinspot Q1Z ILS

User Manual

Edition Notes

The Pinspot Q1Z ILS User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Pinspot Q1Z ILS as of the release date of this edition.

Trademarks

Chauvet, Chauvet DJ, the Chauvet logo, Pinspot, and ILS are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective companies.

Copyright Notice

The works of authorship contained in this manual, including, but not limited to, all designs, text, and images are owned by Chauvet.
© Copyright 2024 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage, or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident, or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision; however, Chauvet has no obligation to make, and does not commit to make, any such revisions.

Document Revision

Go to www.chauvetdj.com for the latest version.

1. Before You Begin

What Is Included

• Pinspot Q1Z ILS
• Power cable
• Quick Reference Guide

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Convention

| Meaning
---|---

1-512

| A range of values

50/60

| A set of values of which only one can be chosen

Settings

| A menu option not to be modified

< ENTER>

| A key to be pressed on the product’s control panel

ON

| A value to be entered or selected

Symbols

Symbol

| Meaning
---|---
| Electrical warning. Not following these instructions may cause electrical damage to the product, accessories, or the user.
| Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
| Important installation or configuration information. The product may not function correctly if this information is not used.
| Useful information.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance of the Pinspot Q1Z ILS.

• ALWAYS:

  • Connect to a grounded circuit.
  • Connect to operating voltages as specified on the product’s spec sticker.
  • Disconnect from power before replacing the fuse.
  • Disconnect from its power source during periods of inactivity.
  • Use a safety cable when suspending overhead.
  • Heed all restrictions and warnings on the spec sticker.
  • Mount in a location with at least 20 in (50 cm) of ventilation.
  • Replace the fuse with the same type and rating.

• In the event of a serious operating problem, stop using immediately.

• DO NOT:

  • Open this product or attempt any repairs. It contains no user-serviceable parts.
  • Look at the light source when the product is on.
  • Use if the power cable is crimped or damaged.
  • Disconnect by pulling on the power cable.
  • Allow flammable materials close to the product when it is operating.
  • Touch the housing when it is on.
  • Block any ventilation holes/slots in the housing.
  • Connect to a dimmer or rheostat.
  • Carry the product by its power cable.
  • Operate in temperatures higher than 104°F (40°C).
  • Expose to environments that exceed the Ingress Protection (IP) rating.
  • Expose to rain or moisture.
  • Use outdoors.
  • Submerge.
  • Set this product on a flammable surface.

Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document.

2. Introduction

Product Overview

#

| Name
---|---

1

| LCD Display

2

| Menu buttons

3

| Microphone

4

| DMX in/out

5

| Fuse holder

6

| Power in

7

| Safety loop

8

| D-Fi USB port

9

| IR sensor

WARNING! DO NOT plug anything other than a D-Fi USB into the USB type B port. Doing so may cause damage to the product.

Product Dimensions

3. Setup

AC Power

The Pinspot Q1Z ILS has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Fuse Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the fuse holder out of the housing.

4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

5. Insert the fuse holder back in place and reconnect power.

6. Spare fuse holder
   (inside safety cap)

7. Installed fuse
   (held by plastic clip)

8. Safety cap

Disconnect the product from the power outlet before replacing the fuse.

Always replace a blown fuse with one of the same type and rating.

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

The Pinspot Q1Z ILS may be mounted in any position; however, make sure adequate ventilation is provided around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming.
• Make sure that the structure and attachment points can support the weight before hanging the product (see the Technical Specifications).
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. The bracket has a 12-mm hole, which is appropriate for this purpose.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
• When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.

Mounting Diagram

1. Safety cable
   (such as CH-05 from Chauvet)

2. Mounting clamp
   (such as CLP-15N from Chauvet)

3. Hanging bracket

4. Bracket adjustment knob (x2)

4. Operation

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel.

Button

| Function
---|---

< MENU>

| Press to find an operation mode or to back out of the current menu option

< UP>

| Press to scroll up the list of options or to find a higher value

< DOWN>

| Press to scroll down the list of options or to find a lower value

< ENTER>

| Press to activate a menu option or a selected value

Menu Map

Refer to the Pinspot Q1Z ILS product page on www.chauvetdj.com for the latest menu map and software.

Main level

|

Programming Levels

| Description
---|---|---

DMX Address

|

001-509

| Sets the DMX starting address

DMX Mode

|

4ch

| 4-channel DMX mode

6ch

| 6-channel DMX mode
7ch| 7-channel DMX mode

ILS Mode

|

ILS1-4

| Selects ILS mode

Fixed Color

|

R

| Selects a fixed combination of colors

G

B

W

GB

RB

RG

RGB

RW

GW

BW

RGW

RBW

GBW

RGBW1

RGBW2

RGBW3

RGBW4

Auto| Auto|

< 001-005>

| Automatic programs

Auto Speed

|

< 001-100>

| Program speed

Dimmer

|

001-255

| Standalone dimmer

Sound

| Sound|

< 001-005>

| Sound-active programs

Sensitivity

|

< 000-100>

| Sound sensitivity

Manual Color

|

Red

|

< 000-255>

| Custom static colors
Combines red, green, blue, and white

Green

Blue

White

Strobe

| Strobe rate

Settings

| Infrared Remote|

ON

| Turns infrared on or off

OFF

Signal Output|

Slave

| DMX out sends master signal to slave products

DMX

| DMX out sends DMX signal from controller

DMX Configuration

The Pinspot Q1Z ILS works with a DMX controller. Information about DMX is in the Chauvet DMX Primer, which is available from the Chauvet website chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

Starting Address

The Pinspot Q1Z ILS uses up to 7 DMX channels, which defines the highest configurable address to 506.
When selecting a starting DMX address, always consider the number of DMX channels the DMX mode uses. If the starting address is set too high, access to some channels could be restricted.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:

1. Press < MENU>.
2. Use < UP> or < DOWN> to select DMX Address.
3. Press < ENTER>.
4. Use  < UP> or < DOWN> to select the starting address, from 001-509.
5. Press < ENTER>.

DMX Personalities

The Pinspot Q1Z ILS has 3 DMX personalities, a 4-channel personality, a 6-channel personality, and a 7-channel personality.
To select which DMX personality to use, follow the steps below:

1. Press < MENU>.
2. Use  < UP> or < DOWN> to select DMX Mode.
3. Press < ENTER>.
4. Use < UP> or < DOWN> to select the DMX personality, from 4ch , 6ch , or 7ch.
5. Press < ENTER>.

D-Fi USB Connectivity

The Pinspot Q1Z ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet DJ. Simply set the product’s DMX Personality and DMX Address, set the DIP switch D-Fi receiving/transmitting channel, then plug it into the D-Fi USB port.

WARNING! DO NOT plug anything other than a D-Fi USB into the USB type B port. Doing so may cause damage to the product.

Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control / menu buttons will be unavailable until the D-Fi USB is unplugged. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. Manual Digital Display/Menu Buttons

D-Fi USB Compatibility

The D-Fi USB can receive a DMX signal from the D-Fi Hub and the FlareCON Air 2 as well as other D-Fi USB products.

D-Fi USB Configuration

1. Set the DMX Personality and DMX address on the Pinspot Q1Z ILS.
2. Use the Chart provided to set BOTH :
   • the Channel, and then
   • The Receiving or Transmitting option

NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.

D-Fi USB DIP Switch Channels

a) Receiving
b) Transmitting

DMX Channel Assignments and Values

DMX Chart

4ch

| 6ch|

7ch

| Function|

Value

| Percent/Setting
---|---|---|---|---|---

–

| –|

1

| Program|

000 009

| No function

010 058

| Automatic program 1

059 106

| Automatic program 2

107 154

| Automatic program 3

155 202

| Automatic program 4

203 249

| Automatic program 5

250 255

| Sound-active program 1

–

| –|

2

| Dimmer|

000 255

| 0-100%

–

| –|

3

| Strobe
(when Ch. 1 is 000 ** 009**)|

000 009

| No function

010 255

| Strobe, slow to fast
Automatic program speed
(when Ch. 1 is 010 ** 249**)|

000 255

| Automatic program speed, slow to fast
Sound sensitivity
(when Ch. 1 is 250 ** 255**)|

000 010

| Sound sensitivity off

011 255

| Sound sensitivity, low to high

1

| 1|

4

| Red|

000 255

| 0-100%

2

| 2|

5

| Green|

000 255

| 0-100%

3

| 3|

6

| Blue|

000 255

| 0-100%

4

| 4|

7

| White|

000 255

| 0-100%

–

| 5|

–

| Dimmer|

000 255

| 0-100%

–

| 6|

–

| Strobe|

000 015

| No function

016 254

| Strobe, slow to fast

255

| Sound-active strobe

Standalone Configuration

Set the product in one of the standalone modes to operate without a DMX controller.

Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

Fixed Color

To run the Pinspot Q1Z ILS with a fixed color or combination of colors, follow the instructions below.

1. Press < MENU> repeatedly until Fixed Color shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to select the desired color(s), from R (red), G (green), B (blue), W (white), GB (green and blue), RB (red and blue), RG (red and green), RGB (red, green, and blue), RW (red and white), GW (green and white), BW (blue and white), RGW (red, green, and white), RBW (red, blue, and white), GBW (green, blue, and white), RGBW1 (red, green, blue, and white 1), RGBW2 (red, green, blue, and white 2), RGBW3 (red, green, blue, and white 3), or RGBW4 (red, green, blue, and white 4).
4. Press < ENTER>.

Automatic Program

To run the Pinspot Q1Z ILS with an automatic program, do the following:

1. Press < MENU> repeatedly until Auto shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to select Auto.
4. Press < ENTER>.
5. Use < UP> or < DOWN> to select the desired program from 001-005.
6. Press < ENTER>.

Automatic Program Speed

To set the speed of the automatic program, follow the instructions below.

1. Press < MENU> repeatedly until Auto shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to select Auto Speed.
4. Press < ENTER>.
5. Use < UP> or < DOWN> to increase or decrease the speed from 001-100.
6. Press < ENTER>.

Standalone Dimmer

To set the intensity of the standalone output, do the following:

1. Press < MENU> repeatedly until Dimmer shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to increase or decrease the dimmer intensity, from 001-255.
4. Press < ENTER>.

Sound-Active Program

To run the Pinspot Q1Z ILS with a sound-active program, follow the instructions below.

1. Press < MENU> repeatedly until Sound shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to select Sound.
4. Press < ENTER>.
5. Use < UP> or < DOWN> to select the desired program from 001-005.
6. Press < ENTER>.

Sound Sensitivity

To set the sound sensitivity of the product, do the following:

1. Press < MENU> repeatedly until Sound shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to select Sensitivity.
4. Press < ENTER>.
5. Use < UP> or < DOWN> to increase or decrease the sensitivity from 000-100.
6. Press < ENTER>.

The product will only respond to low frequencies of music (bass and drums).

Manual Color Mixing

To run the Pinspot Q1Z ILS with a custom static color, follow the instructions below.

1. Press < MENU> repeatedly until Manual Color shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to select which value to edit, from Red , Green , Blue , White , or Strobe.
4. Press < ENTER>.
5. Use < UP> or < DOWN> to increase or decrease the selected value from 000-255.
6. Repeat steps 3-5 until the product output is set as desired.

IRC-6 Infrared Remote Control

The Pinspot Q1Z ILS is compatible with the IRC-6 infrared remote control from Chauvet.
To enable or disable IRC-6 functionality, do the following:

1. Press < MENU> repeatedly until Settings shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to select Infrared Remote.
4. Press < ENTER>.
5. Use < UP> or < DOWN> to select from ON (enable) or OFF (disable).
6. Press < ENTER>.

Consult the table below to operate the Pinspot Q1Z ILS with the IRC-6.

IRC-6

|

Button

| Function
---|---|---
|

< AUTO>

| Press to activate automatic mode, then press to cycle or use < +> or < -> to select a program

< SPEED>

| Press then use < +> or < -> to increase or decrease speed

< SOUND>

| Press to activate sound-active mode, then press to cycle or use < +> or < -> to select a program

< SENSITIVITY>

| Press then use < +> or < -> to increase or decrease sensitivity

< STROBE>

| In manual mode, press to toggle strobe, then use < +> or < -> to crease or decrease strobe speed

< %>

| In auto or sound mode, press then use < +> or < -> to increase or decrease the dimmer

< FADE>

| Press to activate automatic mode, then press to cycle through programs 3 , 4 , and 5

< R>

| Press to activate manual mode, then use < +> or < -> to increase or decrease the red value

< G>

| Press to activate manual mode, then use < +> or < -> to increase or decrease the green value

< B>

| Press to activate manual mode, then use < +> or < -> to increase or decrease the blue value

< A>

| Press to activate manual mode and to toggle between setting all colors to 000 or setting red to 221 , green to 156 , blue to 000 , and white to 000

< UV>

| Press to activate manual mode and to toggle between setting all colors to 000 or setting red to 255 , green to 000 , blue to 255 , and white to 000

< W>

| Press to activate manual mode, then use < +> or < -> to increase or decrease the white value

< +>

| Press to increase speed, sensitivity, or the dimmer/color value, or to scroll up the list of programs

< ->

| Press to decrease speed, sensitivity, or the dimmer/color value, or to scroll down the list of programs

< 0>-<9>

| Press to select a preset fixed color, then use < +> or < -> to select a fixed color

< BLACK OUT>

| Press to turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the product does not respond when a button is pressed, try pressing < BLACK OUT>. Black Out may have been activated.

• Any setting on the IRC-6 will be saved until the system is rebooted. The system will revert to Auto Mode after reboot.
• The buttons on the IRC-6 not listed above are reserved for future use.

Signal Output

To select whether the DMX output port (or transmitting D-Fi USB port) will send the received DMX signal or a master signal, follow the instructions below:

1. Press < MENU> repeatedly until Settings shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to select Signal Output.
4. Press < ENTER>.
5. Use < UP> or < DOWN> to select from Slave (will send a master signal to slave products) or DMX (will send the received DMX signal to the next product in the DMX daisy chain).
6. Press < ENTER>.

Wired Master/Slave Mode

The Master/Slave mode allows a single Pinspot Q1Z ILS product (the “master”) to control the actions of one or more Pinspot Q1Z ILS products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in either standalone mode or with the IRC-6, while the slave products will be set to operate in slave mode. Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.

Slave products:

1. Press < MENU> repeatedly until DMX Address shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to set the starting address to 001.
4. Press < ENTER>.
5. Connect the DMX input of the first slave product to the DMX output of the master product.
6. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.
7. Finish setting and connecting all the slave products.

Master product:

1. Set the Signal Output of the master product to Slave.
2. Set the master product to operate in standalone mode or with the IRC-6.
3. Make the master product the first product in the DMX daisy chain.

• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
• Do not connect more than 31 slaves to the master.

D-Fi USB Master/Slave Mode

The D-Fi USB allows a single Pinspot Q1Z ILS product (the “master”) to control the actions of one or more Pinspot Q1Z ILS products (the “slaves”) without the need of a DMX controller or DMX cables. The master (transmitter) product will be set to operate in standalone mode, while the slave (receiver) products will be set to operate in slave mode. Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.

Slave products:

1. Press < MENU> repeatedly until DMX Address shows on the display.
2. Press < ENTER>.
3. Use < UP> or < DOWN> to set the starting address to 001.
4. Press < ENTER>.
5. Set the D-Fi USB to receive on a specific channel, 1-16.
6. Plug in the D-Fi USB.
7. Finish setting and connecting all the slave products.

Master product:

1. Set the Signal Output of the master product to Slave.
2. Set the master product to operate in standalone mode.
3. Set the D-Fi USB to transmit on the D-Fi channel the slaves are receiving on.
4. Plugin the D-Fi USB.

• All products must be set to the same DMX personality, DMX address, and D-Fi channel.
• Configure all the slave products before configuring the master to transmit.
• Never connect a DMX controller to a D-Fi channel configured for Master/Slave operation because the controller may interfere with the signals from the master.

ILS Mode

ILS (Integrated Lighting System) provides 4 modes that synchronize with the GigBAR MOVE+ILS: Modes 1 and 3 synchronize with side 1 of the GigBAR MOVE+ILS, whereas modes 2 and 4 synchronize with side 2 of the GigBAR MOVE+ILS. When linked, effects will sync with the most similar effect on the selected side of the GigBAR MOVE+ILS: Kinta effects will sync with one of the kintas, moving heads will sync with one of the moving heads, and wash effects will sync with one of the pars. Laser effects will sync with the laser, and strobe effects will sync with the strobe effects regardless of ILS mode.
This product will synchronize with the par effect on the selected side of the GigBAR MOVE+ILS.
To set the Pinspot Q1Z ILS to respond to an ILS signal:

1. Press < MENU> repeatedly until ILS Mode shows on the display.
2. Use < UP> or < DOWN> to select from ILS1 (side 1), ILS2 (side 2), ILS3 (side 1), or ILS4 (side 2).
3. Press < ENTER>.

5. Maintenance

Product Maintenance

Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean all lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:

1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the extemal surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.

6. Technical Specifications

Dimensions and Weight

Length

| Width| Height| Weight
---|---|---|---
12.1 in (308 mm)| 3.5 in (89 mm)| 8.5 in (217 mm)|

3 lb (1.36 kg)

Note: Dimensions in inches are rounded.

Power

Power Supply Type

| Range| Voltage Selection
---|---|---
Switching (internal)| 100 to 240 VAC, 50/60 Hz|

Auto-ranging

Parameter

| 120 V, 60 Hz| 230V, 50 Hz
Consumption
Operating Current
Fuse| 19 W
0.3 A
T 1 A, 250V| 20 W
0.2 A
T 1 A, 250V

Power I/O

| U.S./Worldwide| UK/Europe
Power input connector
Power output connector
Power cable plug| IEC
Edison
Edison (U.S.)| IEC
IEC
Local Plug

Light Source

Type

| Color| Quantity| Power| Current| Lifespan
---|---|---|---|---|---
LED| Quad-color RGBW| 1| 20 W | 5.3 A |

50,000 hours

Photometrics

Strobe Rate

| Manual Zoom Angle| Illuminance (Narrow)| Illuminance (Wide)
---|---|---|---
0 to 33 Hz| 5° to 18°| 4,081 lux @ 2 m |

623 lux @ 2 m

Thermal

Maximum External Temperature

| Cooling System
---|---
104 °F (40 °C)|

Convection

DMX

I/O Connector

| Channel Range
---|---
3-pin XLR|

4, 6, or 7

Ordering

Product Name

| Item Code| UPC Number
---|---|---
Pinspot Q1Z ILS| 10032220|

781462225681

Contact Us

Contact Us

Chauvet World Headquarters
Address: 3360 Davie Rd., Suite 509
Davie, FL 33314
Voice: 954-577-4455
Fax: 954-929-5560
Toll Free: 800-762-1084| Voice: 844-393-7575
Fax: 954-756-8015
Email: chauvetcs@chauvetlighting.comWebsite: www.chauvetdj.com
Chauvet U.K.
Address: Pod 1 EVO Park
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB
UK
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110|

Email: UKtech@chauvetlighting.eu

Website: www.chauvetdj.eu

Chauvet Benelux
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice: +32 9 388 93 97|

Email: BNLtech@chauvetlighting.eu

Website: www.chauvetdj.eu

Chauvet France
Address: 3, Rue Ampére
91380 Chilly-Mazarin
France
Voice: +33 178 85 33 59|

Email: FRtech@chauvetlighting.fr

Website: www.chauvetdj.eu

Chauvet Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany
Voice: +49 421 62 60 20|

Email: DEtech@chauvetlighting.de

Website: www.chauvetdj.eu

Chauvet Mexico
Address: Av. de las Partidas 34 – 3B
(Entrance by Calle 2)
Zona Industrial Lerma
Lerma, Edo. de México, CP 52000
Voice: +52 728-690-2010|

Email: servicio@chauvet.com.mx

Website: www.chauvetdj.mx

Warranty & Returns

For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu /warranty-registration.

Pinspot Q1Z ILS User Manual Rev. 2

Documents / Resources

| CHAUVET DJ Pinspot Q1Z ILS 20 Watt RGBW LED Compact Pin Spot Light [pdf] User Manual
Pinspot Q1Z ILS 20 Watt RGBW LED Compact Pin Spot Light, Pinspot Q1Z ILS, 20 Watt RGBW LED Compact Pin Spot Light, LED Compact Pin Spot Light, Compact Pin Spot Light, Pin Spot Light, Spot Light, Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>