CHAUVET DJ Shocker LED Panel FX Light User Manual

CHAUVET DJ Shocker LED Panel FX Light

Product Information

Specifications

• Product Name: Shocker Panel FX
• Manufacturer: Chauvet & Sons, LLC
• Trademark: Chauvet, Chauvet DJ, Shocker
• Document Revision: 1 (10/2023)

Product Usage Instructions

Before You Begin

• What Is Included: Make sure you have all the components listed in the product packaging.
• Unpacking Instructions: Carefully unpack the product and check for any damages.
• Claims: Follow the claims procedure in case of any missing or damaged parts.
• Text Conventions: Familiarize yourself with the text conventions used in the manual for better understanding.
• Symbols: Understand the symbols used throughout the manual for safety and operational instructions.
• Safety Notes: Read and adhere to all safety notes provided to ensure safe usage of the product.

Introduction

• Product Overview: Understand the basic functionality and features of the Shocker Panel FX.
• Product Dimensions: Refer to the manual for detailed product dimensions for installation purposes.

Setup

• AC Power: Connect the product to a suitable AC power source as per the provided guidelines.
• Fuse Replacement: Follow the instructions for replacing fuses if needed for maintenance.
• Power Linking: Learn how to link multiple units for synchronized operation.
• Mounting: Properly mount the Shocker Panel FX following the recommended mounting instructions.

FAQ

• Q: Can I use the Shocker Panel FX outdoors?
  A: The Shocker Panel FX is designed for indoor use only to ensure its longevity and performance.

• Q: How do I adjust the light settings on the Shocker Panel FX?
  A: Refer to the programming section in the manual to learn how to adjust the light settings based on your preferences.

Edition Notes
The Shocker Panel FX User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Shocker Panel FX as of the release date of this edition.

Trademarks
Chauvet, Chauvet DJ, the Chauvet logo, and Shocker are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.

Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, text, and images are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.

Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.

Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.

Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage, or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident, or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision; however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetdj.com.

Document Revision
Go to www.chauvetdj.com for the latest version.

**Before You Begin

**

What Is Included

• Shocker Panel FX
• Power cable
• Quick Reference Guide

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the Shocker Panel FX.

• ALWAYS:
  • Connect to a grounded circuit.
  • Connect to operating voltages as specified on the product’s spec sticker.
  • Disconnect from power before replacing the fuse.
  • Disconnect from its power source during periods of inactivity.
  • Use a safety cable when suspending overhead.
  • Heed all restrictions and warnings on the spec sticker.
  • Mount in a location with at least 20 in (50 cm) of ventilation.
  • Replace the fuse with the same type and rating.
  • Use a clamp with a captive bolt when a single hanging bracket is used.
• In the event of a serious operating problem, stop using immediately.
• DO NOT:
  • Open this product or attempt any repairs. It contains no user-serviceable parts.
  • Look at the light source when the product is on
  • Use if the power cord is crimped or damaged.
  • Disconnect by pulling on the power cord.
  • Allow flammable materials close to the product when it is operating.
  • Block any ventilation holes/slots in the housing.
  • Connect to a dimmer or rheostat.
  • Carry the product by its power cord.
  • Operate in temperatures higher than 104°F (40°C).
  • Expose to environments that exceed the Ingress Protection (IP) rating.
  • Expose to rain or moisture.
  • Use outdoors.
  • Leave outdoors for extended periods of time.
  • Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation, or shock
  • Set this product on a flammable surface.

Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document.

**Introduction

**

Product Overview

Product Dimensions

**Setup

**

AC Power
The Shocker Panel FX has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
5. Insert the fuse holder back in place and reconnect power.

Disconnect the product from the power outlet before replacing the fuse.
Always replace a blown fuse with one of the same type and rating.

Power Linking
This product provides power linking via the outlet located in the back of the product. See the diagram below for further explanation.

Power Linking Diagram

• NOTE It is possible to link up to 5 Shocker Panel FX products on 120 VAC or up to 10 products on 230 VAC.
• WARNING The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, consult with the local Chauvet distributor as power linking connectors and requirements may differ by country or region.

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation
The Shocker Panel FX may be mounted in any position; however, make sure adequate ventilation is provided around the product.
Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming.
• Make sure that the structure and attachment points can support the weight before hanging the product (see the Technical Specifications).
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
• When power linking multiple products, mount the products close enough for power linking cables to reach.
• When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.

Mounting Diagram

WARNING
To prevent accidental loosening when using a single mounting clamp, be sure to use a clamp with a captive bolt.

Operation

Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel.

Menu Map
Refer to the Shocker Panel FX product page on www.chauvetdj.com for the latest menu map .

DMX Configuration

The Shocker Panel FX works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.

Personality and Starting Address
The Shocker Panel FX uses up to 47 DMX channels in the 47Ch DMX mode, which defines the highest configurable/recommended address to 466.
When selecting a starting DMX address, always consider the number of DMX channels the DMX mode uses. If the starting address is set too high, access to some channels could be restricted.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the personality and starting address, do the following:

1. Press repeatedly until 8Ch, 18Ch, 34Ch, or 47Ch shows on the display.
2. Press .
3. Use or to select the starting address, from d001–512.
4. Press .

**DMX Channel Assignments and Values

**

DMX Charts

Standalone Configuration
Set the product in one of the standalone modes to operate without a DMX controller.

NOTE
Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

Static Colors
To run the Shocker Panel FX in Preset Color mode, follow the instructions below:

1. Press repeatedly until C– shows on the display.
2. Press .
3. Use or to select C001-015.
4. Press .

Automatic Programs
To run the Shocker Panel FX in Automatic mode, follow the instructions below:

1. Press repeatedly until P– shows on the display.
2. Press .
3. Use or to select P001–040.
4. Press .

Automatic Speed
To set the program speed, follow the instructions below:

1. Press repeatedly until S– shows on the display.
2. Press .
3. Use or to increase or decrease the program speed, from S001–100.
4. Press .

Dimmer
To adjust the dimmer, follow the instructions below:

1. Press repeatedly until dIn shows on the display.
2. Press .
3. Use or to increase or decrease the dimmer, from L000–L255.
4. Press .

Dimmer Curve
To adjust the dimmer speed on the Shocker Panel FX, follow the instructions below:

1. Press repeatedly until dCur shows on the display.
2. Press .
3. Use or to select oFF, Cur1, Cur2, or Cur3.
4. Press .

DMX Loss
To set the DMX Loss mode on the Shocker Panel FX, follow the instructions below:

1. Press repeatedly until LoSS shows on the display.
2. Press .
3. Use or to select how the product responds when no sound is detected, from hoLd (holds the last setting), Auto (sets the unit to auto mode), Soun (sets the unit to sound mode), or bLAC (blacks out the product).
4. Press .

Sound-Active Mode
To run the Shocker Panel FX in sound-active mode, follow the instructions below.

1. Press repeatedly until Snd shows on the display.
2. Press .
3. Press or to select from Sn00–Sn30.
4. Press .

Sound Sensitivity
To set the sound sensitivity of the product, do the following:

1. Press repeatedly until SEnS shows on the display.
2. Press .
3. Use or to increase or decrease the sound sensitivity, from U001–100.
4. Press .

Custom Color Mixing
To run the Shocker Panel FX with a custom static color, follow the instructions below.

1. Press repeatedly until U– shows on the display.
2. Press .
3. Press to cycle through the options, r (red), G (green), b (blue), and U (white).
4. Use or to increase or decrease the selected value from 000–255.
5. Repeat steps 3-4 until the product output is set as desired.

Wired Master/Slave Mode
The Master/Slave mode allows a single Shocker Panel FX product (the “master”) to control the actions of one or more Shocker Panel FX products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in either standalone mode or with the IRC-6, while the slave products will be set to operate in slave mode. Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:

1. Press repeatedly until ___ shows on the display.
2. Press .
3. Use or to set the starting address to ___1.
4. Press .
5. Connect the DMX input of the first slave product to the DMX output of the master product.
6. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.
7. Finish setting and connecting all the slave products.

Master product:

1. Set the master product to operate in standalone mode or with the IRC-6.
2. Make the master product the first product in the DMX daisy chain.
   • Configure all the slave products before connecting the master to the daisy chain.
   • Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
   • Do not connect more than 31 slaves to the master.

Maintenance

Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean all lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:

1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.

NOTE
Always dry the transparent surfaces carefully after cleaning them.

Technical Specifications

Contact Us

[email protected]
www.chauvetdj.com
[email protected]
www.chauvetdj.eu
[email protected]
www.chauvetdj.eu
[email protected]
www.chauvetdj.eu
[email protected]
www.chauvetdj.eu
[email protected]
www.chauvetdj.mx

Warranty & Returns

For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu /warranty-registration.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>