Q3BT ILS Quad Color Linear Wash Effect Light
“`html
Specifications
- Product Name: COLORband Q3BT ILS
- Manufacturer: Chauvet & Sons, LLC
- Trademarks: Chauvet, Chauvet DJ, COLORband
Product Overview
The COLORband Q3BT ILS is a lighting fixture designed for
professional use. It features Bluetooth connectivity and provides
vibrant color output for various applications.
Product Dimensions
Dimensions: [Insert Dimensions Here]
Product Usage Instructions
Setup
AC Power: Connect the fixture to a power source
using the provided power cable.
Fuse Replacement: In case of a blown fuse,
follow the instructions in the manual to safely replace it with a
new one.
Power Linking: To link multiple fixtures
together, follow the power linking instructions provided in the
manual.
FAQ
Q: Can I control the COLORband Q3BT ILS remotely?
A: Yes, the COLORband Q3BT ILS features Bluetooth connectivity,
allowing you to control it remotely using a compatible device.
Q: How do I troubleshoot if the colors are not displaying
correctly?
A: Check the power connections, ensure the fixture is set to the
correct mode, and verify that the Bluetooth connection is
established properly. Refer to the troubleshooting section in the
manual for detailed steps.
“`
COLORband Q3BT ILS
User Manual
Edition Notes
The COLORband Q3BT ILS User Manual includes a description, safety precautions,
installation, programming, operation, and maintenance instructions for the
COLORband Q3BT ILS as of the release date of this edition.
Trademarks
Chauvet, Chauvet DJ, the Chauvet logo, and COLORband are registered trademarks
or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in
the United States and other countries. Other company and product names and
logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited
to, all designs, text, and images are owned by Chauvet. © Copyright 2024
Chauvet & Sons, LLC. All rights reserved. Electronically published by Chauvet
in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for
professional information purposes only. Chauvet expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its
content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11
in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to
scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as
this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in
all respects. However, Chauvet assumes no responsibility and specifically
disclaims any and all liability to any party for any loss, damage, or
disruption caused by any errors or omissions in this document, whether such
errors or omissions result from negligence, accident, or any other cause.
Chauvet reserves the right to revise the content of this document without any
obligation to notify any person or company of such revision; however, Chauvet
has no obligation to make, and does not commit to make, any such revisions.
Document Revision
Go to www.chauvetdj.com for the latest version.
Revision Date Description
2
02/2024 Added BT cert logo/ updated formatting.
COLORband Q3BT ILS User Manual Rev. 2
PRODUCT NAME
Table of Contents
1. Before You Begin …………………………………………………………….. 1
What Is Included ………………………………………………………………………………. 1 Unpacking
Instructions………………………………………………………………………. 1
Claims ……………………………………………………………………………………………………………. 1
Text Conventions ……………………………………………………………………………… 1 Symbols
………………………………………………………………………………………….. 1 Safety
Notes…………………………………………………………………………………….. 2 FCC Statement of Compliance
…………………………………………………………… 2
RF Exposure Warning for North America and Australia…………………………………………. 3
2. Introduction …………………………………………………………………….. 4
Product Overview……………………………………………………………………………… 4 Product Dimensions
………………………………………………………………………….. 5
3. Setup ………………………………………………………………………………. 6
AC Power ………………………………………………………………………………………… 6
Fuse Replacement …………………………………………………………………………………………… 6 Power
Linking………………………………………………………………………………………………….. 6
Mounting …………………………………………………………………………………………. 7
Orientation………………………………………………………………………………………………………. 7 Rigging
…………………………………………………………………………………………………………… 7
4. Operation ………………………………………………………………………… 8
Control Panel Operation…………………………………………………………………….. 8 Menu Map
……………………………………………………………………………………….. 8 DMX
Configuration……………………………………………………………………………. 8
DMX Personality and Starting Address……………………………………………………………….. 8
D-Fi USB Connectivity ………………………………………………………………………. 9
D-Fi USB Compatibility …………………………………………………………………………………….. 9 D-Fi USB
Configuration…………………………………………………………………………………….. 9
DMX Values …………………………………………………………………………………….. 10 Standalone
Configuration…………………………………………………………………… 11
Preset Color Mode …………………………………………………………………………………………… 11 Automatic
Programs…………………………………………………………………………………………. 11 Auto-Program Speed
……………………………………………………………………………………….. 11
Dimmer…………………………………………………………………………………………………………… 11 Sound-Active Programs
……………………………………………………………………………………. 11 Sound
Sensitivity……………………………………………………………………………………………… 11 Custom Color
Mixing………………………………………………………………………………………… 11
IRC-6 Infrared Remote Control …………………………………………………………… 12
IRC-6 Operation ………………………………………………………………………………………………. 12
Bluetooth Control ……………………………………………………………………………… 12 Master/Slave Mode
…………………………………………………………………………… 13 D-Fi USB Master/Slave Mode
…………………………………………………………….. 13 ILS Mode…………………………………………………………………………………………. 13
5. Maintenance…………………………………………………………………….. 14
Product Maintenance ………………………………………………………………………… 14
6. Technical Specifications ………………………………………………….. 15 Contact Us
………………………………………………………………………….. 16
Warranty & Returns…………………………………………………………………………… 16
COLORband Q3BT ILS User
Before You Begin
1. Before You Begin
What Is Included
· COLORband Q3BT ILS · Power cable
· Quick Reference Guide
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure
all the parts are in the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear
damaged from shipping, or show signs of mishandling, notify the carrier
immediately, not Chauvet. Failure to report damage to the carrier immediately
may invalidate the claim. In addition, keep the box and contents for
inspection. For other issues, such as missing components or parts, damage not
related to shipping, or concealed damage, file a claim with Chauvet within 7
days of delivery.
Text Conventions
Convention Meaning
1512 50/60 Settings
ON
A range of values A set of values of which only one can be chosen A menu
option not to be modified A key to be pressed on the product’s control panel A
value to be entered or selected
Symbols
Symbol
Meaning
Electrical warning. Not following these instructions may cause electrical
damage to the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following
these
!
instructions may make the product not work, cause damage to the product, or
cause
harm to the operator.
Important installation or configuration information. The product may not
function correctly if this information is not used.
Useful information.
1
COLORband Q3BT ILS User Manual Rev. 2
Before You Begin
Safety Notes
ALWAYS:
Connect to a grounded circuit. Connect to operating voltages as specified on
the product’s spec sticker. Disconnect from power before replacing the fuse.
Disconnect from its power source during periods of inactivity. Use a safety
cable when suspending overhead. Heed all restrictions and warnings on the spec
sticker. Mount in a location with at least 20 in (50 cm) of ventilation.
Replace the fuse with the same type and rating. Use a clamp with a captive
bolt when a single hanging bracket is used.
In the event of a serious operating problem, stop using immediately.
DO NOT:
Open this product or attempt any repairs. It contains no user-serviceable
parts.
Look at the light source when the product is on.
Use if the power cord is crimped or damaged.
Disconnect by pulling on the power cord.
Allow flammable materials close to the product when it is operating.
Touch the housing when it is on.
Block any ventilation holes/slots in the housing.
!
Connect to a dimmer or rheostat.
Carry the product by its power cord.
Operate in temperatures higher than 104°F (40°C).
Expose to environments that exceed the Ingress Protection (IP) rating.
Expose to rain or moisture.
Use outdoors.
Submerge.
Leave outdoors for extended periods of time.
Expose to corrosive environmental conditions such as temperature, humidity,
salinity, pressure, radiation, or shock.
Set this product on a flammable surface.
Keep this User Manual for future use. If the product is sold to someone else,
be sure that they also receive this document.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
COLORband Q3BT ILS User Manual Rev. 2
2
Before You Begin
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and the user.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter
3
COLORband Q3BT ILS User Manual Rev. 2
Introduction
2. Introduction
Product Overview
1
2
3
4
5
6
11
10
9
8
7
Name
1 Fuse holder
2 Safety loop
3 Display screen
4 Microphone
5 D-Fi USB Port
6 Mounting bracket
7 3-pin DMX in/out
8 Antenna
9 Menu buttons
10 Power in/out
11
Bracket adjustment knob (2X)
COLORband Q3BT ILS User Manual Rev. 2
4
Product Dimensions
Introduction
3.8 in 98 mm
22.1 in 562 mm
39.3 in 1000 mm
24.2 in 615 mm
5.5 in 140 mm
3.1 in 78 mm
2 in 50mm
5
COLORband Q3BT ILS User Manual Rev. 2
Setup
3. Setup
AC Power
The COLORband Q3BT ILS has an auto-ranging power supply, and it can work with
an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s
power requirements (circuit breaker, power outlet, and wiring), use the
current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating
indicates the product’s average current draw
under normal conditions.
· Always connect the product to a protected circuit (a circuit breaker or
fuse).
Make sure the product has an appropriate electrical ground to avoid the risk
of
!
electrocution or fire. · To eliminate unnecessary wear and improve its
lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse Replacement
1. Disconnect the product from power. 2. Wedge the tip of a flat-head
screwdriver into the slot of the fuse holder. 3. Pry the safety cap out of the
housing. 4. Remove the blown fuse from the clip on the front of the safety cap
and replace with a fuse of the
exact same type and rating. 5. Re-insert the fuse holder and reconnect power.
Power Linking
The product provides power linking via the Edison outlet located in the back
of the product. Please see the diagram below for further explanation.
Power-Linking Diagram
1st product
2nd product
3rd product
Additional COLORband Q3BT ILS products
It is possible to power link up to 10 COLORband Q3BT ILS products on 120 VAC
or up to 19 COLORband Q3BT ILS products on 230 VAC.
The power-linking diagram corresponds to the North American version of the
! product ONLY! If using the product in other markets, consult with the local
Chauvet distributor, as power-linking connectors and requirements may differ
by country or region.
COLORband Q3BT ILS User Manual Rev. 2
6
Setup
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
Orientation
The COLORband Q3BT ILS may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
· Before deciding on a location for the product, always make sure there is
easy access to the product for maintenance and programming purposes.
· Mount the product on a structure or surface that can support the product’s
weight (see Technical Specifications).
· Always use a safety cable when mounting the product overhead. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
· Use a mounting clamp of appropriate weight capacity when rigging the product
on a truss.
· When power linking multiple products, mount the products close enough for
power-linking cables to reach.
· The bracket adjustment knobs allow for directional adjustment when aiming
the product to the desired angle. Only loosen or tighten the bracket knobs
manually. Using tools could damage the knobs.
Mounting Diagram
Safety cable
(such as CH-05 from Chauvet)
Mounting clamp
(such as CLP-15 or CLP-15N from Chauvet)
Bracket adjustment knob
Mounting bracket
7
COLORband Q3BT ILS User Manual Rev. 2
Operation
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located next to
the display. Please refer to the Product Overview to see the button locations
on the control panel.
Button Function
