CHAUVET DJ EZBeam Q3 ILS Battery Powered LED Fixture Bluetooth User Guide
- May 15, 2024
- Chauvet DJ
Table of Contents
CHAUVET DJ EZBeam Q3 ILS Battery Powered LED Fixture Bluetooth
Specifications:
- Product: EZBeam Q3 ILS
- Connection: DMX data connection and D-Fi USB for wireless connection
- Battery Type: Rechargeable lithium-ion
- Power Cable: Included
Product Usage Instructions
Safety Notes:
It is important to follow these safety notes for the installation, use, and maintenance of the EZBeam Q3 ILS:
- Stop using immediately in case of a serious operating problem.
- Do not open the product or attempt any repairs as it contains no user-serviceable parts.
- Avoid looking at the light source when the product is on.
- Do not use if the power cord is crimped or damaged.
- Avoid disconnecting by pulling on the power cord.
- Keep flammable materials away from the product when it is operating.
- Avoid touching the housing when it is on.
- Do not block any ventilation holes/slots in the housing.
- Do not connect to a dimmer or rheostat to prevent electrical hazards.
- Avoid setting the product on a flammable surface.
Battery Charge Notes:
Follow these guidelines for charging the rechargeable lithium-ion batteries:
- Stop charging if the battery becomes hot, smokes, swells, or gives off an odor.
- Do not leave the product unattended while charging.
- Avoid depleting the battery below 10%.
- Do not charge the battery in a closed container.
- Avoid charging for more than 24 hours.
Control PanelDescription:
The control panel of EZBeam Q3 ILS includes the following buttons and functions:
- Button 1: Exits from the current menu or function
- Button 2: Navigates upwards through the menu list and increases the numeric value when in a function
- Button 3: Navigates downwards through the menu list and decreases the numeric value when in a function
- Button 4: Enables the currently displayed menu or sets the currently selected value into the selected function
ILS Connection:
The EZBeam Q3 ILS uses DMX data connection and D-Fi USB for wireless connection to the Integrated Lighting System (ILS) ecosystem. For detailed instructions on configuring the EZBeam Q3 ILS into ILS mode, refer to the User Manual available at www.chauvetdj.com.
FAQ:
-
Q: What is included with the EZBeam Q3 ILS?
A: The package includes the EZBeam Q3 ILS unit, a power cable, and a Quick Reference Guide. -
Q: How should I handle a serious operating problem with the product?
A: In case of a serious operating problem, stop using the product immediately and refer to the User Manual for troubleshooting steps. Do not attempt any repairs yourself.
Safety Notes
These Safety Notes include important information about the installation, use, and maintenance of the EZBeam Q3 ILS.
- ALWAYS:
- Connect to a grounded circuit.
- Connect to operating voltages as specified on the product’s spec sticker.
- Disconnect from power before replacing the fuse.
- Disconnect from its power source during periods of inactivity.
- Use a safety cable when suspending overhead.
- Heed all restrictions and warnings on the spec sticker.
- Mount in a location with at least 20 in (50 cm) of ventilation.
- Replace the fuse with the same type and rating.
- Use a clamp with a captive bolt when a single hanging bracket is used.
- In the event of a serious operating problem, stop using it immediately.
- DO NOT:
- Open this product or attempt any repairs. It contains no user-serviceable parts.
- Look at the light source when the product is on.
- Use if the power cord is crimped or damaged.
- Disconnect by pulling on the power cord.
- Allow flammable materials close to the product when it is operating.
- Touch the housing when it is on.
- Block any ventilation holes/slots in the housing.
- Connect to a dimmer or rheostat.
- Carry the product by its power cord.
- Operate in temperatures higher than 104°F (40°C).
- Expose to environments that exceed the Ingress Protection (IP) rating.
- Expose to rain or moisture.
- Use outdoors.
- Leave outdoors for extended periods.
- Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation, or shock.
- Set this product on a flammable surface.
What is Included
- EZBeam Q3 ILS
- Power cable
- Quick Reference Guide
Control Panel Description
| Button | Function |
|---|---|
| < MENU> | Exits from the current menu or function |
| < UP> | Navigates upwards through the menu list and increases the numeric |
value when in a function
< DOWN>| Navigates downwards through the menu list and decreases the
numeric value when in a function
< ENTER>| Enables the currently displayed menu or sets the currently
selected value into the selected function
ILS Connection
The EZBeam Q3 ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending). For more information about configuring the EZBeam Q3 ILS into ILS mode, please refer to the User Manual available at www.chauvetdj.com.
Battery Charge Notes
Rechargeable lithium-ion batteries are potentially hazardous and can present a serious FIRE HAZARD, SERIOUS INJURY, and/or PROPERTY DAMAGE if damaged, defective, or improperly used.
- ALWAYS:
- Charge using a manufacturer-provided charger while the product is powered off.
- Charge the battery in temperatures between 32°-95°F (0°-35°C).
- Allow a depleted battery to charge for a few minutes before turning on the product. If the battery is completely discharged, the device cannot be turned on immediately when the charger is connected.
- Keep at least 3 ft (1 m) distance to any heat source and away from flammable materials.
- Keep the lid of any charging case open while charging.
- Keep batteries away from children.
- Store batteries between 40-60% charge.
- Follow local regulations when disposing of batteries.
- Replace with an authentic Chauvet battery.
- DO NOT:
- Continue charging if the battery becomes hot, smokes, swells, or gives off an odor during charging.
- Leave the product unattended while charging.
- Deplete the battery below 10%.
- Charge the battery in a closed container.
- Charge for more than 24 hours.
Contact Us
General Information Technical Support
Chauvet World Headquarters
Address: 3360 Davie Rd. Voice:
844-393-7575
Davie, FL 33314 Fax: 954-756-8015
Voice: 954-577-4455 Email:
chauvetcs@chauvetlighting.com
Fax: 954-929-5560
Toll Free: 800-762-1084 Website:
www.chauvetdj.com
Chauvet U.K.
Address: Pod 1 EVO Park Email:
UKtech@chauvetlighting.eu
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB Website: www.chauvetdj.eu
UK
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110
Chauvet Benelux
Address: Stokstraat 18 Email:
BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website: www.chauvetdj.eu
Voice: +32 9 388 93 97
Chauvet France
Address: 3, Rue Ampère 91380 Chilly-Mazarin
Email: FRtech@chauvetlighting.fr
France Website: www.chauvetdj.eu
Voice: +33 1 78 85 33 59
Chauvet Germany
Address: Bruno-Bürgel-Str. 11 28759 Bremen
Email : DEtech@chauvetlighting.de
Germany Website: www.chauvetdj.eu
Voice : +49 421 62 60 20
Chauvet Mexico
Address : Av. de las Partidas 34 – 3B (Entrance by Calle 2)
Email: servicio@chauvet.com.mx
Zona Industrial Lerma Website: www.chauvetdj.mx
Lerma, Edo. de México, CP 52000
Voice: +52 728-690-2010
Visit the applicable website above to verify our contact information and
instructions to request support. Outside the U.S., U.K., Ireland, Mexico,
France, Germany, or Benelux, contact the dealer of record.
EZBeam Q3 ILS QRG ML6 Rev. 2
© Copyright 2023 Chauvet
All rights reserved
Scan the QR code to access the product page, warranty terms, and the complete
User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>