CHAUVET DJ Intimidator Beam 360X Moving Head User Guide

: October 30, 2023
: Chauvet DJ

Table of Contents

QUICK REFERENCE GUIDE
Documents / Resources

CHAUVET DJ Intimidator Beam 360X Moving Head 1

CHAUVET DJ Intimidator Beam 360X Moving Head

CHAUVET DJ logo1

QUICK REFERENCE GUIDE

About This Guide

The Intimidator Beam 360X Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and DMX values. Download the User Manual from www.chauvetdj.com for more details.

Disclaimer
The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu /warranty-registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes **

**

These Safety Notes include important information about installation, use, and maintenance.

ONLY connect this product to a grounded and protected circuit.
DISCONNECT from power before cleaning or replacing the fuse.
DO NOT look at the light source when the product is on.
Make sure the power cord is not crimped or damaged.
Never disconnect this product from power by pulling on the cord.
When mounting this product overhead, ALWAYS use a safety cable.
DO NOT allow flammable materials close to the product when it is operating.
DO NOT touch the product’s housing when it is on because it will be hot.
The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or moisture.
Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

Be sure that no ventilation slots on the unit’s housing are blocked.
Never connect this product to a dimmer or rheostat.
Replace the fuse with the same type and rating.
Never carry the product by the power cord. Use only the hanging bracket or handle to carry this product.
The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
In the event of a serious operating problem, stop using immediately.
DO NOT open this product. It contains no user-serviceable parts.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Refer to Contact Us at the end of this QRG for contact information.

What is Included

Intimidator Beam 360X
Power cable
Hanging bracket
Quick Reference Guide

To Begin
Unpack your Intimidator Beam 360X and make sure you have received all parts in good condition. If the box or contents appear damaged, notify the carrier immediately, not Chauvet.

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Power Linking
It is possible to power link up to 9 Intimidator Beam 360X products on 120 V or 15 products on 230 V. Never exceed this number. Power-linking cables can be purchased separately.

Fuse Replacement

Disconnect the product from power.
Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
Re-insert the fuse holder and reconnect power.

Mounting

Before mounting this product, read the Safety Notes.

Mounting Diagram

CHAUVET DJ Intimidator Beam 360X Moving Head -
Mounting

Mounting clamp
(such as CLP-15 from Chauvet)
Hanging bracket
Safety cable
(such as CH-05 from Chauvet)
Feet for surface mounting (x4)

Control Panel Description

Button

| Function
---|---

< MENU>

| Exits from the current menu or function

< UP>

| Navigates upwards through the menu list and increases the numeric value when in a function

< DOWN>

| Navigates downwards through the menu list and decreases the numeric value when in a function

< ENTER>

| Enables the currently displayed menu or sets the currently selected value into the selected function

Refer to the Intimidator Beam 360X product page on www.chauvetdj.com for the latest menu map.

Main Level

|

Programming Levels

| Description
---|---|---

Address

|

001–512

| Sets the DMX starting address

Run Mode

| DMX|

14CH

| Selects DMX mode

8CH

Slave

|

Slave1–4

| Selects Slave mode 1, 2, 3, or 4

Auto

| Selects Auto mode

Sound

| Selects Sound-Active mode

RF

|

RF 1–4

| Sets the product to work with the RFC-XL remote in group 1, 2, 3, or 4. (RF remote must be bound to the product first)

RFP

| Sets the product to work with public RF signal

Manual

| Pan|

000–255

| Manual pan control

Tilt

| Manual tilt control

Color

| Manual color control

Gobo

| Manual gobo control

Prism

| Manual prism control

Focus

| Manual focus control

Frost

| Manual frost control

Dimmer

| Manual dimmer control

Shutter

| Manual shutter control

Setup

| Pan Reverse|

OFF

| Normal pan operation

ON

| Reverse pan operation

Tilt Reverse

|

OFF

| Normal tilt operation

ON

| Reverse tilt operation

Screen Reverse

|

OFF

| Normal display

ON

| Reverse display

Pan Angle

|

540

| Selects the 540° pan angle range

360

| Selects the 360° pan angle range

180

| Selects the 180° pan angle range

Tilt Angle

|

270

| Selects the 270° tilt angle range

180

| Selects the 180° tilt angle range

90

| Selects the 90° tilt angle range

Totem Mode

|

OFF

| Does not restrict the pan and tilt motion

UP

| Restricts the pan and tilt motion for overhead mounting

DOWN

| Restricts the pan and tilt motion for surface/floor mounting

Sensitivity

|

001–100

| Sets sound sensitivity

DMX Loss

|

Hold

| Holds the last setting when signal is lost

Black

| Blacks out the product when signal is lost

Auto

| Sets the unit to Auto mode when signal is lost

Sound

| Sets the unit to Sound mode when signal is lost

Indicator

|

ON

| Enables/disables LED Indicator

OFF

Flash if DMX

|

ON

| Sets whether the LED indicator flashes when the fixture is connected to or disconnected from the DMX

OFF

RF

|

Bind

| Shows instructions on how to bind the RF remote to the product

Reset

| Resets the product

Factory Set

| Loads factory defaults

Sys Info

| Ver:|

V_

| Displays the firmware version

Running Mode

|

_

| Displays the current running mode

DMX Address

|

_

| Displays the current DMX address

Temperature

|

_

| Displays the current product temperature

DMX Linking

The Intimidator Beam 360X can work with a DMX controller. Instructions for connecting and configuring this product for DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.

Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 499.

Master/Slave Connection
The Intimidator Beam 360X uses the DMX data connection for its Master/Slave mode. Information about configuring the Intimidator Beam 360X for Master/Slave operation is in the User Manual, which is available from the Chauvet website.

RF Remote
The Intimidator Beam 360X can be operated with the CHAUVET RFC or RFC-XL remotes. For more information about the RF Remote, download instructions for the Intimidator Beam 360X User Manual from www.chauvetdj.com.

Gobos

CHAUVET DJ Intimidator Beam 360X Moving Head - Gobos

DMX Values

8Ch

|

14Ch

| Function|

Value

| Percent/Setting
---|---|---|---|---

1

|

1

| Pan|

000 255

| 0–540°

–

|

2

| Pan fine|

000 255

| Fine control of panning

2

|

3

| Tilt|

000 255

| 0–234°

–

|

4

| Tilt fine|

000 255

| Fine control of tilting

–

|

5

| Pan/tilt speed|

000 255

| Pan/Tilt speed, fast to slow

3

|

6

| Color wheel|

000 003

| White

004 007

| Red

008 011

| Orange

012 015

| Yellow

016 019

| Green

020 023

| Blue

024 027

| CTO

028 031

| Cyan

032 035

| Magenta

036 039

| Lime

040 043

| Purple

044 047

| Dark yellow

048 051

| Pink

052 055

| CTB

056 063

| UV

064 067

| White/red

068 071

| Red/orange

072 075

| Orange/yellow

076 079

| Yellow/green

080 083

| Green/blue

084 087

| Blue/CTO

088 091

| CTO/cyan

092 095

| Cyan/magenta

096 099

| Magenta/lime

100 103

| Lime/purple

104 107

| Purple/dark yellow

108 111

| Dark yellow/pink

112 115

| Pink/CTB

116 119

| CTB/UV

120 127

| UV/White

128 191

| Color cycling rainbow, slow to fast

192 255

| Reverse color cycling rainbow, slow to fast

4

|

7

| Gobo wheel
(see Gobos)|

000 003

| Open

004 007

| Gobo 1

008 011

| Gobo 2

012 015

| Gobo 3

016 019

| Gobo 4

020 023

| Gobo 5

024 027

| Gobo 6

028 031

| Gobo 7

032 035

| Gobo 8

036 039

| Gobo 9

040 043

| Gobo 10

044 047

| Gobo 11

048 051

| Gobo 12

052 055

| Gobo 13

056 059

| Gobo 14

060 063

| Gobo 15

064 067

| Gobo 16

068 071

| Gobo 17

072 075

| Gobo 17 shake, slow to fast

076 079

| Gobo 16 shake, slow to fast

080 083

| Gobo 15 shake, slow to fast

084 087

| Gobo 14 shake, slow to fast

088 091

| Gobo 13 shake, slow to fast

092 095

| Gobo 12 shake, slow to fast

096 099

| Gobo 11 shake, slow to fast

100 103

| Gobo 10 shake, slow to fast

104 107

| Gobo 9 shake, slow to fast

108 111

| Gobo 8 shake, slow to fast

112 115

| Gobo 7 shake, slow to fast

116 119

| Gobo 6 shake, slow to fast

120 123

| Gobo 5 shake, slow to fast

124 127

| Gobo 4 shake, slow to fast

128 131

| Gobo 3 shake, slow to fast

132 135

| Gobo 2 shake, slow to fast

136 139

| Gobo 1 shake, slow to fast

140 143

| Open

144 199

| Cycle effect, slow to fast

200 255

| Reverse cycle effect, slow to fast

5

|

8

| Prism|

000 007

| No function

008 015

| 16-facet prism

016 130

| Prism rotation, slow to fast

131 247

| Reverse prism rotation, slow to fast

248 255

| 16-facet prism

6

|

9

| Focus|

000 255

| Focus

–

|

10

| Dimmer|

000 255

| 0–100%

7

|

11

| Strobe|

000 003

| Off

004 007

| On

008 076

| Strobe, slow to fast

077 145

| Pulse strobe, slow to fast

146 215

| Random strobe, slow to fast

216 255

| On

8

|

12

| Frost|

000 255

| 0–100%

–

|

13

| Function|

000 007

| No function

008 015

| Blackout on pan/tilt movement

016 023

| Blackout on color wheel movement

024 031

| Blackout on gobo wheel movement

032 039

| Blackout on pan/tilt/color wheel movement

040 047

| Blackout on pan/tilt/gobo wheel movement

048 055

| Blackout on pan/tilt/color wheel/gobo wheel movement

056 095

| No function

096 103

| Pan reset

104 111

| Tilt reset

112 119

| Color wheel reset

120 127

| Gobo wheel reset

128 135

| Frost reset

136 143

| Prism reset

144 151

| Focus reset

152 159

| All reset

160 255

| No function

–

|

14

| Movement macros|

000 007

| No function

008 023

| Movement macro 1

024 039

| Movement macro 2

040 055

| Movement macro 3

056 071

| Movement macro 4

072 087

| Movement macro 5

088 103

| Movement macro 6

104 119

| Movement macro 7

120 135

| Movement macro 8

136 151

| Sound-active movement macro 1

152 167

| Sound-active movement macro 2

168 183

| Sound-active movement macro 3

184 199

| Sound-active movement macro 4

200 215

| Sound-active movement macro 5

216 231

| Sound-active movement macro 6

232 247

| Sound-active movement macro 7

248 255

| Sound-active movement macro 8

Multi-Language

Contact Us

General Information	Technical Support

Chauvet World Headquarters

Address: 5200 NW 108th Ave.
Sunrise, FL 33351
Voice: (954) 577-4455
Fax: (954) 929-5560
Toll Free: (800) 762-1084

|

Voice: (844) 393-7575
Fax: (954) 756-8015
Email: chauvetcs@chauvetlighting.com

Website: www.chauvetdj.com

Chauvet U.K.

Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110

| Email: UKtech@chauvetlighting.eu

Website: www.chauvetdj.eu

Chauvet Benelux

Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice: +32 9 388 93 97

|

Email: BNLtech@chauvetlighting.eu

Website: www.chauvetdj.eu

Chauvet France

Address: 3, Rue Ampère
91380 Chilly-Mazarin
France
Voice: +33 1 78 85 33 59

|

Email: FRtech@chauvetlighting.fr

Website: www.chauvetdj.eu

Chauvet Germany

Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany
Voice: +49 421 62 60 20

|

Email: DEtech@chauvetlighting.de

Website: www.chauvetdj.eu

Chauvet Mexico

Address: Av. de las Partidas 34 – 3B
(Entrance by Calle 2)
Zona Industrial Lerma
Lerma, Edo. de México, CP 52000
Voice: +52 (728) 690-2010

|

Email: servicio@chauvet.com.mx

Website: www.chauvetdj.mx

Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Follow the instructions to request support or to return a product. Visit our website for contact details.

CHAUVET DJ - LABELS