TELTONIKA FMM003 OBD Trackers Instructions

TELTONIKA FMM003 OBD Trackers

Product Information

Specifications

• Product: FMM003 Geofence Tracker
• Main Function: Setting geofence zones for tracking purposes
• Coordinates System: Longitude and Latitude
• Zone Shapes: Rectangular and Circular

Product Usage Instructions

Setting Geofence Zones
To set geofence zones using the FMM003 Geofence Tracker, follow these steps:

1. Access the device settings menu.
2. Locate the X1 and Y1 fields to set the coordinates for the bottom-left corner of the geofence zone.
3. Determine whether you want to create a rectangular or circular zone.
4. If creating a rectangular zone, set X2 and Y2 for the upper-right corner coordinates. If creating a circular zone, set R for the radius.
5. Save the settings to activate the geofence zone.

Frequently Asked Questions (FAQ)

• Q: How many geofence zones can be set using the FMM003 Geofence Tracker?
  A: The FMM003 Geofence Tracker allows users to set up to 10 geofence zones for tracking purposes.

• Q: Can I edit or delete existing geofence zones on the FMM003 Geofence Tracker?
  A: Yes, users can edit or delete existing geofence zones through the device settings menu on the FMM003 Geofence Tracker.

KNOW YOUR DEVICE

PINOUT

PIN NUMBER/PIN NAME/DESCRIPTION

1. LS_CAN_H Low Speed CAN High/PSA CAN High
2. MS_CAN_H Medium Speed CAN High
3. GND (-) Ground
4. GND (-) Ground
5. CAN_H High-Speed CAN
6. K-Line
7. CAN_L PSA CAN Low
8. LS_CAN_L Low-Speed CAN Low
9. MS_CAN_L Medium Speed CAN Low
10. HS_CAN_L High-Speed CAN Low
11. L-Line
12. VCC (10 – 30)V DC(+) POWER SUPPLY (+10- 30 V DC)

SET UP YOUR DEVICE

HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY

1. COVER REMOVAL
   Gently remove the FMM003 cover using a plastic pry tool from both sides.

2. 2 MICRO-SIM CARD INSERT
   Insert the Micro-SIM card as shown with the PIN request disabled or read our Wiki1 on how to enter it later in Teltonika Configurator2. Make sure that the Micro-SIM card cut-off corner is pointing forward to the slot.

3. wiki.teltonika-gps.com/view/FMM003_Security_info

4. wiki.teltonika.lt/view/Teltonika_Configurator.

5. BATTERY CONNECTION
   Connect the battery as shown to the device. Position the battery in a place where it does not obstruct other components.

6. ATTACHING COVER BACK
   Attach the device cover back. The device is ready to be connected.

PC CONNECTION

PC CONNECTION (WINDOWS)

1. Power-up FMM003 with DC voltage (10 – 30 V) power supply using supplied power cable. LEDs should start blinking, see “LED indications1”.
2. Connect the device to the computer using a Micro-USB cable or Bluetooth connection:
   • Using Micro-USB cable
   • You will need to install USB drivers, see “How to install USB drivers (Windows)2”
   • Using Bluetooth
   • FMM003 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device >Bluetooth. Choose your device named – “FMM003_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
3. You are now ready to use the device on your computer.
4. wiki.teltonika-gps.com/view/FMM003_LED_status
5. “How to install USB drivers”

HOW TO INSTALL USB DRIVERS (WINDOWS)

1. Please download COM port drivers from here1.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in the driver installation window.
4. In the following window click the Install button.
5. Setup will continue installing the driver and eventually, the confirmation window will appear. Click Finish to complete the setup.

CONFIGURATION

At first FMM003 device will have default factory settings set. These settings should be changed according to the user’s needs. The main configuration can be performed via Teltonika Configurator1 software. Get the latest Configurator version from here2. Configurator operates on Microsoft Windows OS and uses the prerequisite MS .NET Framework. Make sure you have the correct version installed.

1. wiki.teltonika-gps.com/view/Teltonika_Configurator
2. wiki.teltonika-gps.com/view/Teltonika_Configurator_versions

MS .NET REQUIREMENTS

• Operating system

  • Windows Vista
    Windows 7
    Windows 8.1
    Windows 10

• MS .NET Framework version

  • MS .NET Framework 4.6.2

• Version

  • 32 and 64-bit

• Links

  • www.microsoft.com

1. dotnet.microsoft.com/en-us/download/dotnet-framework/net462.

Downloaded Configurator will be in a compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking ? in the right bottom corner.

The configuration process begins by pressing on the connected device.

After connection to Configurator Status window will be displayed.

Various Status window1 tabs display information about GNSS2, GSM3, I/O4, Maintenance5, etc. FMM003 has one user- editable profile, which can be loaded and saved to the device. After any modification of configuration, the changes need to be saved to the device using the Save to Device button. Main buttons offer the following functionality:

• Load from device – loads configuration from the device.
• Save to device – saves the configuration to the device.
• Load from file – loads configuration from file.
• Save to file – saves the configuration to file.
• Update firmware – updates the firmware on the device.
• Read records – reads records from the device.
• Reboot the device – restart the device.
• Reset configuration – sets device configuration to default.

The most important configurator section is GPRS – where all your server and GPRS settings6 can be configured and Data Acquisition7 – where data acquiring parameters can be configured. More details about FMM003 configuration using Configurator can be found in our Wiki8.

1. wiki.teltonika-gps.com/view/FMM003_Status_info
2. wiki.teltonika-gps.com/view/FMM003_Status_info#GNSS_Info
3. wiki.teltonika-gps.com/view/FMM003_Status_info#GSM_Info
4. wiki.teltonika-gps.com/view/FMM003_Status_info#I.2FO_Info
5. wiki.teltonika-gps.com/view/FMM003_Status_info#Maintenance
6. wiki.teltonika-gps.com/index.php?title=FMM003_GPRS_settings
7. wiki.teltonika-gps.com/index.php?title=FMM003_Data_acquisition_settings
8. wiki.teltonika-gps.com/index.php?title=FMM003_Configuration.

QUICK SMS CONFIGURATION

The default configuration has optimal parameters present to ensure the best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it:

Note:
Before SMS text, two space symbols should be inserted.

GPRS SETTINGS:

1. 2001 – APN

2. 2002 – APN username (if there are no APN usernames, an empty field should be left)

3. 2003 – APN password (if there are no APN passwords, an empty field should be left)
   SERVER SETTINGS:

4. 2004 – Domain

5. 2005 – Port

6. 2006 – Data sending protocol (0 – TCP, 1 – UDP)

DEFAULT CONFIGURATION SETTINGS

After successful SMS configuration, the FMM003 device will synchronize time and update records to the configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator1 or SMS parameters2.

1. wiki.teltonika-gps.com/view/Teltonika_Configurator
2. wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list.

MOUNTING RECOMMENDATIONS

CONNECTING THE DEVICE TO THE VEHICLE:
Find OBDII connector in your vehicle.

LED INDICATIONS

NAVIGATION LED INDICATIONS

BEHAVIOUR/MEANING

• Permanently switched on GNSS signal is not received
• Blinking every second in Normal mode, GNSS is working
• Off GNSS is turned off because the device is not working or Device is in sleep mode
• Blinking fast constantly Device firmware is being flashed

STATUS LED INDICATIONS

BEHAVIOUR/MEANING

• Blinking every second in Normal mode
• Blinking every two seconds Sleep mode
• Blinking fast for a short time Modem activity
• Off Device is not working or Device is in boot mode

BASIC CHARACTERISTICS

MODULE

• Name
  • Quectel BG95-M3, Teltonika TM2500
  • Quectel BG95-M6 (only Japan and North Korea)
  • FMM003-Q5IB0 (BG95-M6)
• Technology LTE CAT M1/CAT NB2/EGPRS/GNSS/BLUETOOTH

GNSS

• GNSS GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
• Receiver 33 channel
• Tracking sensitivity -165 dBM
• Accuracy < 3 m
• Hot start < 1 s
• Warm start < 25 s
• Cold start < 35 s

CELLULAR

• Technology LTE CAT M1, CAT NB2
• 2G bands
  • BG95-M3:
  • EGPRS: B2/B3/B5/B8
• 4G bands
  • BG95-M3 and BG95-M6:
  • CAT M1: LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85
  • CAT NB2: LTE-FDD:B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B2/B28/B66/B71/B85
• Data transfer
  • BG95:
  • LTE: Max. 588Kbps (DL)/Max.1119Kbps (UL)
  • GPRS: Max. 107Kbps (DL)/Max. 85.6Kbps (UL)
• Maximum output power
  • Class 4 for GSM850/900: 33±2dBm
  • Class 1 for GSM1800/1900: 30±2dBm
  • Class 3 for LTE-TDD: 20±2dBm
  • Class 3 for LTE-FDD: 20±2dBm
  • Bluetooth: 4.30dBm (Maximum out EIRP)
  • Bluetooth LE: -5.17dBm (Maximum out EIRP)
• Data support SMS (text/data)

POWER

• Input voltage range 10 – 30 V DC with overvoltage protection
• Back-up battery 170 mAh Li-Po battery 3.7 V (0.63 Wh)
• Internal fuse 3A, 125V
• Power Consumption
  • At 12V < 6.5 mA (Ultra Deep Sleep)
  • At 12V < 8 mA (Deep Sleep)
  • At 12V < 13 mA (Online Deep Sleep)
  • At 12V < 16.3 mA (GPS Sleep)
  • At 12V < 31 mA (nominal with no load)
  • At 12V < 0.25A Max. (with full Load/Peak

BLUETOOTH

• Specification 4.0 + LE
• Supported peripherals
  Temperature and Humidity sensor1, Inateck Barcode Scanner, Universal BLE sensors support

OBD INTERFACE

• Data HS CAN, MS CAN, SW CAN, K-line
• Data reading
  • OEM Fuel level, odometer, and up to 32 vehicle onboard parameters, supported OBD protocols:
  • ISO 9141-2 (5 baud init, 10.4 kbaud)
  • ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
  • ISO 14230-4 KWP (fast init, 10.4 kbaud)
  • ISO 15765-4 CAN (11-bit ID, 250 kbaud)
  • ISO 15765-4 CAN (11-bit ID, 500 kbaud)
  • ISO 15765-4 CAN (29 bit ID, 250 kbaud)
  • ISO 15765-4 CAN (29 bit ID, 500 kbaud)
  • ISO 14229 (UDS)
  • J2819 (VW TP2.0

INTERFACE

• Connection OBDII socket
• GNSS antenna Internal High Gain
• GSM antenna Internal High Gain
• USB 2.0 Micro-USB
• LED indication 2 status LED lights
• SIM Micro-SIM
• Memory 128MB internal flash memory

PHYSICAL SPECIFICATION

• Dimensions 67,2 x 49,6 x 25 mm (L x W x H)
• Weight 63 g

OPERATING ENVIRONMENT

• Operating temperature (without battery) -40 °C to +85 °C
• Storage temperature (without battery) -40 °C to +85 °C
• Operating humidity 5% to 95% non-condensing
• Operating temperature (with battery): -20 °C to +40 °C
• Ingress Protection Rating IP41
• Battery charge temperature 0 °C to +45 °C
• Battery discharge temperature -20 °C to +60 °C
• Battery storage temperature
  • -20 °C to +45 °C for 1 month
  • -20 °C to +35 °C for 6 months

FEATURES

• Sensors Accelerometer
• Scenarios
  • Green Driving, Over Speeding detection, Jamming detection, GNSS Fuel Counter, Excessive Idling detection, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip 2
• Sleep modes
  • GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep 3
• Configuration and firmware update
  • FOTA Web 4 , FOTA 5 , Teltonika Configuration and firmware update Configurator 6 (USB, Bluetooth), FMBT mobile application 7 (Configuration)
• SMS Configuration, Events, Debug
• GPRS commands Configuration, Debug
• Time Synchronization GPS, NITZ, NTP
• Fuel monitoring OBDII
• Ignition detection Accelerometer, External Power Voltage, Engine RPM

1. wiki.teltonika-gps.com/view/FMM003_Features_settings
2. wiki.teltonika-gps.com/view/FMM003_Sleep_modes#Deep_Sleep_mode
3. wiki.teltonika-gps.com/view/FOTA_WEB
4. wiki.teltonika-gps.com/view/FOTA
5. wiki.teltonika-gps.com/view/Teltonika_Configurator
6. wiki.teltonika-gps.com/view/FMBT_Mobile_application.

SAFETY INFORMATION

This message contains information on how to operate FMM003 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

• The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10…+30 V DC.
• To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of the device’s operation.
• Before unmounting the device from the vehicle, the ignition MUST be OFF.
• Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.
• All wireless data-transferring devices produce interference that may affect other devices that are placed nearby.
• Please consult representatives of your vehicle model regarding the OBDII location on your vehicle. In case you are not sure about the proper connection, please consult qualified personnel.
• The programming must be performed using a PC with an autonomic power supply.
• Installation and/or handling during a lightning storm is prohibited.
• The device is susceptible to water and humidity.
• Teltonika is not responsible for any harm caused by the wrong cables used for connection between PC and FMM003
• WARNING! Do not use the FMM003 device if it distracts the driver or causes inconvenience due to OBDII placement. The device must not interfere with the driver.
• Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose of them in the battery recycle bin found in stores.

CERTIFICATION AND APPROVALS

• This sign on the package means that it is necessary to read the User‘s Manual before you start using the device. The full User‘s Manual version can be found in our Wiki1.
  • wiki.teltonika-gps.com/index.php?title=FMM003
• The RoHS1 is a directive regulating the manufacture, import, and distribution of Electronics and Electrical Equipment (EEE) within the EU, which bans from use of 10 different hazardous materials (to date).
  • wiki.teltonika-gps.com/view/FMM003_RoHS.
• This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.

CHECK ALL CERTIFICATES

All the newest certificates may be found in our Wiki2.

1. wiki.teltonika-gps.com/view/FMM003Certification%26_Approvals.

WARRANTY

• We guarantee our products a 24-month warranty1 period.
• All batteries carry a 6-month warranty period.
• Post-warranty repair service for products is not provided.
• If a product stops operating within this specific warranty time, the product can be:
  • Repaired
  • Replaced with a new product
  • Replaced with an equivalent repaired product fulfilling the same functionality
  • Replaced with a different product fulfilling the same functionality in case of EOL for the original product

Additional agreements for an extended warranty period can be agreed upon separately.

WARRANTY DISCLAIMER

• Customers are only allowed to return products as a result of the product being defective, due to order assembly or manufacturing fault.
• Products are intended to be used by personnel with training and experience.
• Warranty does not cover defects or malfunctions caused by accidents, misuse, abuse, catastrophes, improper maintenance, or inadequate installation – not following operating instructions (including failure to heed warnings) or use with equipment with which it is not intended to be used.
• The warranty does not apply to any consequential damages.
• Warranty is not applicable for supplementary product equipment (e.g. PSU, power cables, antennas) unless the accessory is defective on arrival.
• More information on what is RMA1

1. wiki.teltonika-gps.com/view/RMA_guidelines.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>