Xblitz S4 Mini Car Camera User Manual

Xblitz S4 Mini Car Camera

Thank you for purchasing Xblitz S4 Duo!
Thank you for purchasing the Xblitz S4 dashboard camera! This device is a video recorder designed to record the route of your vehicle while driving. A special mobile app is used to view the materials recorded by the camera.
Please read the user’s manual before using the product.

PACKAGE CONTENTS

1. Xblitz S4 Camera
2. Micro SD card reader
3. Charger
4. Car holder
5. User’s manua

BEFORE USE

1. It is recommended to use branded micro SD cards with 16GB to 64GB of memory, of speed class 10.

2. Before inserting the card into the recorder, format it into the FAT32 file system on a computer, then in the recorder.

3. The memory card must be installed when the device is turned o, otherwise the card and device may be damaged. The same applies to removing the card.

4. The camera does not have a battery, but a built-in capacitor. It is not possible to operate the device without connecting it to power.

5. When the memory card is full, the oldest unprotected recordings will be overwritten.

6. It is recommended to use the functions of the device as intended – do not use MOTION DETECTION when driving, this may cause the device to turn on and o automatically.

7. It is recommended that you set the G-SENSOR option to a minimum to avoid protecting unnecessary materials and losing space on the memory card.
   The card must be formatted in the FAT32 file system first on a computer and then in the recorder.

8. Sound: The device has a capacitive microphone that records all ambient noises. Sounds can overlap, causing distortion.

DESCRIPTION OF THE RECORDER

1. Lens on rotating head
2. Button to protect the recording from being overwritten
3. RESET button
4. AV port (inactive)
5. Micro SD card slot
6. Mini USB port (power supply)
7. Place for the holder
8. LED light
9. Microphone

INSTALLATION

CAMERA INSTALLATION INSTRUCTIONS

1. Select and clean the location where you want to install the camera.
2. Place the camera holder.
3. Insert the memory card into the slot in the camera.
4. Place the camera in the holder.
5. Point the camera lens towards the road.
6. Connect the camera to the charger.
7. Guide the power supply cable so that it does not obscure the view of the driver (see the picture above).
8. Plug the power supply plug into the car lighter socket.

GETTING STARTED

1. Download the free “Ucam” app to your mobile device that uses Android or iOS operating system.
2. Turn on the camera (the camera turns on automatically when connected to the power supply).
3. Open the Ucam app on your mobile device.
4. Press the “Please connect DVR” button and then “Go to connect DVR”.
5. From the list of available Wi-Fi networks, connect to the Xblitz S4 network and when your phone asks for a password, type “12345678”.
6. Go back to the app. If everything has gone successfully, you should be able to see the image recorded by the camera.

MAIN FEATURES

1. Mobile app
   The camera can be operated using a special app that can be downloaded to a device that uses iOS or Android operating systems.

2. Loop recording
   The camera divides the recordings into clips of selected length. You can select the length of the files in the options. When the memory card is full, the oldest recording is overwritten.

3. Resolution
   The camera can record in several resolutions. The higher the resolution, the better the quality of the recordings, but also the bigger the size of the files on the memory card. It is recommended to use the highest resolution.

4. G-Sensor
   Gravity sensor. The sensor is turned on at the time of collision and the recording from the event is protected from being overwritten. It is recommended to set it the lowest available value, as at a higher setting, the camera can capture shocks caused by uneven roads, which may fill the memory card with files that can’t be overwritten.

5. Motion detection mode
   When it is turned on and you leave the camera in standby mode connected to the power source, the camera will start recording when it detects motion.

6. Sound recording
   The camera can also record audio along with video recording.

LED

The camera is equipped with an LED that tells you about the camera’s recording status.

1. LED off – device turned o.
2. The LED is on, red – the device on, the camera is not recording.
3. The led blinks slowly, red – the device records video.
4. The led blinks quickly, red – the device records a video protected from being overwritten.
5. The led blinks quickly, blue – the memory card is not detected by the device.
   Please turn o the camera and place a memory card in it.

DESCRIPTION OF THE APP BUTTONS

1. BACK – takes you back to the main menu of the app.
2. SETTINGS – allows you to change the camera recording settings.
3. This button does not perform any function when you pair the app with Xblitz S4.
4. RECORDING – allows you to turn video recording on or o.
5. FULL SCREEN – this button extends the camera view to the entire screen of your phone or tablet.
6. GALLERY – view and edit archived files recorded by the camera.
7. PHOTO – allows you to take a photo using the camera.

SETTINGS MENU

1. WiFi Name – shows the name of the WiFi network through which the app connects to the camera.

2. Set WiFi Password – allows you to change the Password of the WiFi network through which the app connects to the camera.

3. Video Resolution – allows you to change the resolution of the videos recorded by the camera.

4. Loop Recording – allows you to change the length of the videos you’re recording.

5. Motion Detection – enables motion detection mode, in which the camera automatically starts recording a short video when it detects a moving object.
   This video will be protected from being overwritten.
   NOTE: Turn motion detection mode on only when you leave the vehicle parked!

6. Audio Recording – allows you to turn sound recording on or o.

7. Date Watermark – allows you to turn the watermark with the date and time of the recording in the video on or o.

8. G-Sensor Sensitivity – allows you to set the sensitivity of the gravity sensor.
   This sensor detects sudden vibrations (e.g. caused by a car collision) and protects the recording of this incident from being overwritten.
   NOTE: to prevent G-Sensor from protecting footage from uneven roads, we recommend setting low sensitivity.

9. Set Device Language – not applicable to the S4 model.

10. Speed Units – not applicable to the S4 model. Lets you choose whether the vehicle speed information on the recording is to be displayed in kilometers per hour or in miles per hour.

11. Time Zone – not applicable to the S4 model. Lets you set in which time zone your vehicle is located.

12. MicroSD Card format – you can format the microSD card placed in the camera.

13. Default Setting – restores all app settings to defaults.

14. Firmware Version – shows what version of the software is used by the device.

PRECAUTIONS

1. Do not take the device apart or interfere it yourself. In the event of a failure, you must contact the service point.
2. Use only original accessories.
3. Use only the original charger that came with the kit.
4. The device cannot be used in violation of the laws of the country or region that you use it in.
5. Operating temperature of the device is 0 – 35 °C. Storage temperature: +5 to +45°C. Humidity: 5-90%, non-condensing.
6. Do not damage the device with physical force or by dropping it.
7. Keep your product clean, the lens in particular. Do not use detergents and chemicals when cleaning the device.
8. Clean the device only when it is disconnected from the power supply.
9. Keep the device away from children.
10. Do not expose the device to very high temperatures and fire.
11. If you feel the smell of roasted plastic or electronics from the camera, disconnect the device from the power supply as soon as possible and contact the service point.

TECHNICAL SPECIFICATIONS

WARRANTY CARD/ COMPLAINTS

The product is covered by a 24-month warranty. The terms of the guarantee can be found at: https://xblitz.pl/warranty/
Complaints should be reported using the complaint form located at: http://reklamacje.kgktrade.pl/
Details, contact and website address can be found at: www.xblitz.pl
Specifications and contents of the kit are subject to change without notice. We apologise for any inconvenience.

KGK Trade declares that this device XBLITZ S4 is compliant with significant requirements of directive 2014/53/EU. The text of this declaration may be found on the website: http://xblitz.pl/download/DOC/deklaracja-CE- Xblitz-S4.pdf

The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19 / EU) and the Directive on batteries and accumulators (2006/66 / EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

Manufacturer:
KGK Trade sp. z o.o. sp. k.
os. Urocze 12
31-953 Cracow
Poland
Made in P.R.C

[www.xblitz.pl](http://www.xblitz.pl)

FAQ

| WARNING! Use only the original 5V/1.5A charger.
(Do not connect directly to the 220/230V socket). Failure to follow the recommendations may cause damage to the camera or dangerous situations.
---|---
| ARNING! Playing files on a computer:
The camera does not have a mass memory drive mode. To play the files on a computer, take the memory card out of the device and use a memory card reader to connect it to a computer.

1. The device does not turn on.****

– It is recommended to check the power source.

2. The device does not turn on/o automatically.****

– The reason for this behavior may be the constant power supply in the car lighter socket.

3. The device restarts while driving.****

– It is recommended to check the power source.

4. The device does not record in a loop (records randomly).****

– Check the setting of the “motion detection” function and “parking mode” – both should be disabled when driving.

– 5. The application shows the message “Memory full”.****

– Check the “G-sensor” and “parking mode” functions and set them to a minimum.
– The card must be formatted in FAT32 format first on the computer and then in the recorder.

6. The device records noise or distorted, blurred sound.****

– The device has a very sensitive microphone that records any sounds from the environment. Recorded sounds can overlap. The windshield air supply can also distort the sound.

7. The device does not respond.****

– Briefly press the RESET button or restore the device to factory settings.
– Due to the continuous improvement of the products, the manufacturer reserves
the right to change the device and its kit without prior notice, some of the features described in this manual may slightly dier from reality

References

• System reklamacyjny KGK Trend
• Warranty - Xblitz.pl

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>