HYUNDAI HY-Y15 True Wireless Earphones Instruction Manual
- July 23, 2024
- HYUNDAI
Table of Contents
- HYUNDAI HY-Y15 True Wireless Earphones
- Usage Instruction
- Packing list
- Product schematic description
- Product specification
- LED Indicator Status
- Product operating instructions
- Restore factory settings
- Touch screen operation
- Name and content of hazardous substances in products
- Warranty Service
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HYUNDAI HY-Y15 True Wireless Earphones
Please read all instructions carefully and retain them for future use.
Usage Instruction
- Don’t attempt to disassemble the unit and change any part, except if there is an operation method mentioned in the manual.
- Don’t expose the unit to liquid, moisture, or humidity, since it is not a waterproof product.
- Disconnect the unit with your BT device and move it to the safe area if the liquid gets inside the unit.
- Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
- Don’t expose the unit to extremely high temperatures or dispose of the unit in fire as it will result in an explosion.
- Don’t place the unit in an electromagnetic interference environment to avoid malfunction.
Packing list
Product schematic description
Product specification
- Bluetooth version: V5.4
- Transmission distance: 10M
- Battery capacity: 30mAh
- Usage time: approximately 4 hours (headphones)
- Charging time: approximately 1.5 hours (for headphones)
- Rated input: 5V –35mA
Charging case specification
- Battery capacity: 300mAh
- Charging time: approximately 1.5 hours
- Rated input: 5V –250mA
(All technical information is subject to actual performance)
Charge the Charging case
Connect the Type-C cable to the 5V power adaptor, and another end to the
charging port of the Charging case.
(Kind reminder: When the white indicator light of the charging compartment flashes, please charge the charging compartment promptly.)
LED Indicator Status
Case LED Indicator
- Charging the charging compartment (not fully charged): The compartment symbol above the LCD display panel is yellow and the battery percentage is displayed
- Charging compartment fully charged: The compartment symbol above the LCD display panel is white and displays the battery level (100)
- Discharge display: The headphone symbol above the LCD display panel is yellow and the battery percentage is displayed
- Low battery display: The charging compartment displays a low battery interface.
Product operating instructions
- Power on
- Method 1: Remove from the charging compartment, and the headset automatically turns on.
- Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones.
- Power off
- Method 1: Put the headphones into the charging case directly and close the case to turn off.
- Method 2: Touch the MF button of the headphones for 5s to turn off the headphones.
- Pairing to the BT device
- Step 1: Open the upper cover of the charging compartment to remove the headphones, binaural automatic pairing;
- Step 2: Open the BT list of smart devices, search ” HY-Y15 “and Connect (single ear use is supported).
Touch control button operating
Music playing mode
Left/Right headphone operating
Hands-free function
Left/ Right headphone operating (incoming call)
Voice Assistant
Left/Right Earphone Operation
Noise reduction mode switching
Left/Right Earphone Operation
Restore factory settings
After turning on the phone without the pairing state, click the headset function key 5 times to clear the pairing information and then turn off the phone.
Touch screen operation
Name and content of hazardous substances in products
This form is compiled per SJ/T 11364.
- 0: Indicates that the content of the hazardous substance in all homogeneous materials of the part is Below the limit requirements specified in GB/T 26572.
- X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds
- The limit requirements are specified in GB/T 26572.
- The parts marked with “X” on the form are all harmful due to the limitations of global technological development. Substitution of substances.
- Printed circuit board components*: including printed circuit boards and their parts, electronic components, etc., Depending on the product model, the product you purchased may not contain all the above components
- Electronic and electrical products sold in the People’s Republic of China must mark this Logo, the number in the logo represents the product under normal use environmental protection use period.
Warranty Service
Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!
Authorized by Modern Integrated Commercial Holdings Co., Ltd
- Authorized party: Shenzhen Modern Digital Electronics Co., Ltd
- Address: 601A, Chentian R&D Building, No. 50 Baotian Road, Xixiang Street, Baoan District, Shenzhen
- Manufacturer: Modern Innovation (Shenzhen) Technology Development Co., Ltd
- Address: 1909, Block A, Rongchuang Zhihui Building, Intersection of Longsheng Road and Jinglong Jianshe Road, Shangfen Community, Minzhi Street, Longhua District, Shenzhen.
FCC Statement
According to Part 15 of the FCC Rules, this device has been tested to meet the restrictions for Class B digital devices. These restraining decrees provide reasonable protection against harmful disturbances in residential facilities. The device generates and uses radiofrequency energy, If this instruction is not installed and used by the regulations, it may cause harmful interference to radio communications. However, there are There is no guarantee that interference will not occur in a particular installation. If this device is built for radio or television reception Into harmful interference, the device can be determined by turning it off and on when the user is encouraged to try to pass through one or Several more measures below
- Redirect or reposition the receiving antenna.
- Increase the distance between the device and the receiver.
- Sockets connected to devices on circuits different from the receiver are connected.
- Please consult a dealer or experienced radio/TV technician for assistance.
This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions
- The device shall not cause harmful interference.
- The device must accept any received interference, including interference that may cause unexpected operation.
Changes or modifications that are not explicitly approved by the compliance responsible party may invalidate the user’s permission to operate the device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.